October 2012 - core-libs-dev

Replacement of Quicksort in java.util.Arrays with new Dual-Pivot Quicksort
by Vladimir Yaroslavskiy 27 Feb '16

27 Feb '16

Hello All, I'd like to share with you new Dual-Pivot Quicksort which is faster than the known implementations (theoretically and experimental). I'd like to propose to replace the JDK's Quicksort implementation by new one. Description ----------- The classical Quicksort algorithm uses the following scheme: 1. Pick an element P, called a pivot, from the array. 2. Reorder the array so that all elements, which are less than the pivot, come before the pivot and all elements greater than the pivot come after it (equal values can go either way). After this partitioning, the pivot element is in its final position. 3. Recursively sort the sub-array of lesser elements and the sub-array of greater elements. The invariant of classical Quicksort is: [ <= p | >= p ] There are several modifications of the schema: [ < p | = p | > p ] or [ = p | < p | > p | = p ] But all of them use *one* pivot. The new Dual-Pivot Quicksort uses *two* pivots elements in this manner: 1. Pick an elements P1, P2, called pivots from the array. 2. Assume that P1 <= P2, otherwise swap it. 3. Reorder the array into three parts: those less than the smaller pivot, those larger than the larger pivot, and in between are those elements between (or equal to) the two pivots. 4. Recursively sort the sub-arrays. The invariant of the Dual-Pivot Quicksort is: [ < P1 | P1 <= & <= P2 } > P2 ] The new Quicksort is faster than current implementation of Quicksort in JDK (L. Bentley and M. Douglas McIlroy) and classical Quicksort. The full description of the Dual-Pivot Quicksort you can find on my page: http://iaroslavski.narod.ru/quicksort Performance tests ----------------- Here is result of running on different types of input data: Client VM all 85% organ 0..1 0..4 random ascend descend equal equal pipes random 010101 random Dual-Pivot: 16.83 5.31 5.47 0.35 0.68 10.59 1.06 1.02 2.18 Bentley's: 19.77 9.08 10.13 0.63 1.12 13.22 1.63 1.08 2.49 Server VM all 85% organ 0..1 0..4 random ascend descend equal equal pipes random 010101 random Dual-Pivot: 23.94 6.68 6.63 0.43 0.62 17.14 1.42 1.96 3.41 Bentley's: 25.20 10.18 10.32 2.07 1.33 16.72 2.95 1.82 3.39 The a lot of other tests have been run under client and server mode. The most interesting is BentleyBasher test framework. It runs battery of tests for all cases: { 100, 1000, 10000, 1000000 } x { sawtooth, rand, stagger, plateau, shuffle } x { ident, reverse, reverse_front, reverse_back, sort, dither} where 100, ... , 1000000 - array length sawtooth: x[i] =i%m rand: x[i] = rand() % m stagger: x[i] = (i*m + i) % n plateau: x[i] = min(i, m) shuffle: x[i] = rand()%m? (j+=2): (k+=2) ident(x) - a copy of x reverse(x, 0, n) - reversed copy reverse_front(x, 0, n/2) - front half reversed reverse_back(x, n/2, n) - back half reversed sort(x) - an ordered copy dither(x) - add i%5 to x[i] Here is the result of execution: Server VM: http://spreadsheets.google.com/pub?key=t_EAWUkQ4mD3BIbOv8Fa-AQ&output=html Client VM: http://spreadsheets.google.com/pub?key=tdiMo8xleTxd23nKUObcz0Q&single=true&… Mathematical investigations --------------------------- It is proved that for the Dual-Pivot Quicksort the average number of comparisons is 2*n*ln(n), the average number of swaps is 0.8*n*ln(n), whereas classical Quicksort algorithm has 2*n*ln(n) and 1*n*ln(n) respectively. Full mathematical proof see in attached proof.txt and proof_add.txt files. Theoretical results are also confirmed by experimental counting of the operations. Diff between current and new implementation of Quicksort -------------------------------------------------------- Here is the link to the diff for java.util.Arrays class: http://cr.openjdk.java.net/~alanb/6880672/webrev.00 If you like to look and play with new algorithm, please, take attached class DualPivotQuicksort.java Feedback -------- Also I'd like to share a feedback from Joshua Bloch and Jon Bentley who spent a lot of time investigating this algorithm, who gave me many advices and tips how to make new Quicksort better. -------- Original Message -------- Subject: Re: Integration of new Dual-Pivot Quicksort into JDK 7 Date: Thu, 10 Sep 2009 07:20:11 -0700 From: Joshua Bloch <jjb(a)google.com> Jon also says that Vladimir should make every reasonable improvement to the basic method before checking in the code. In his words, "It would be horrible to put the new code into the library, and then have someone else come along and speed it up by another 20% by using standard techniques." I believe it's not unlikely that this code may end up getting ported to many languages and widely deployed in much the manner of Bentley and McIlroy's fine sort (which is nearing 20 successful years in the field). Jon will help Vladimir do this. -------- Original Message -------- Subject: Dual-Pivot Quicksort: Next Steps Date: Wed, 09 Sep 2009 15:02:25 -0400 From: Jon Bentley <jbentley(a)avaya.com> Vladimir, Josh, I *finally* feel like I understand what is going on. Now that I (think that) I see it, it seems straightforward and obvious. Tony Hoare developed Quicksort in the early 1960s. I was very proud to make minor contributions to a particularly clean (binary) quicksort in the mid 1980s, to a relatively straightforward, industrial strength Quicksort with McIlroy in the early 1990s, and then to algorithms and data structures for strings with Sedgewick in the mid 1990s. I think that Vladimir's contributions to Quicksort go way beyond anything that I've ever done, and rank up there with Hoare's original design and Sedgewick's analysis. I feel so privileged to play a very, very minor role in helping Vladimir with the most excellent work! ----------------------------------------------- Let me know, if you have any questions/comments. Thank you, Vladimir Here is the details between steps (1) and (2) in the case of Dual-Pivot Quicksort: ----------------------------------------------------------------------------- >From the algorithm above, the average number of comparisons C_n as a function of the number of elements may be represented by the equation: (1) C_n = 1 + 2/(n*(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + 1*i + C_{j-i-1} + 2*(j-i- 1) + C_{n-j-1} + 2*(n-j-1)} Equation (1) means that total number is the sum of the comparison numbers of all cases of partitions into 3 parts plus number of comparisons for elements from left part (one comparison), center and right parts (2 comparisons). !!! It can be rewritten in other way: !!! (2) C_n = 1 + R*(n-2) + 2/(n(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + C_{j-i-1} + C_{n-j-1}} where R is the average number of comparisons during one iteration. This constant R can be found as average value (1 + 2 + 2) / 3 = 5/3 ~ 1.6666. ----------------------------------------------------------------------------- How it can be rewritten: We should show that 2/(n*(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {i + 2*(j-i- 1) + 2*(n-j-1)} equals to 5/3 * (n-2). Let's consider the double sum: sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {i + 2*(j-i- 1) + 2*(n-j-1)} = = sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {2*n - 4} - sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {i} = = 2*(n-2)*sum_{i=0}^{n-2} {n-1-i} - sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {i} = = 2*(n-2)*((n-1)^2 - (n-1)*(n-2)/2) - (n-1)*sum_{i=0}^{n-2} {i} + sum_{i=0}^{n-2} {i*i} = ------------------------------------------------------------------ here we use the property: sum_{k=1}{n} {k^2} = n^3/3 + n^2/2 + n/6 ------------------------------------------------------------------ = 2*(n-2)*((n-1)^2 - (n-1)*(n-2)/2) - (n-1)*(n-1)*(n-2)/2 + (n-2)^3/3 + (n-2)^2/2 + (n-2)/6 = = 1/6 * (12*(n-1)^2*(n-2) - 6*(n-1)*(n-2)^2 - 3*(n-1)^2*(n-2) + 2*(n-2)^3 + 3*(n-2)^2 + (n-2)) = = 1/6 * (3*(n-1)*(n-2)*(3*(n-1) - 2*(n-2)) + (n-2)*(2*(n-2)^2 + 3*(n-2) + 1))) = = 1/6 * (3*(n-1)*(n-2)*(n+1) + (n-2)*(2*n^2 - 5*n + 3)) = = 1/6 * (n-2)*(5*n^2 - 5*n) = 5/6 * n*(n-1)*(n-2) Substitute the result into equation (1): (1.1) C_n = 1 + 2/(n*(n-1)) * 5/6 * n*(n-1)*(n-2) + 2/(n*(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + C_{j-i-1} + C_{n-j-1}} or (1.2) C_n = 1 + 5/3*(n-2) + 2/(n*(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + C_{j-i-1} + C_{n-j-1}} We see that (1.2) is same as (2). /** * @author Vladimir Yaroslavskiy * @version 2009.09.10 m765 */ public class DualPivotQuicksort { public static void sort(int[] a) { sort(a, 0, a.length); } public static void sort(int[] a, int fromIndex, int toIndex) { rangeCheck(a.length, fromIndex, toIndex); dualPivotQuicksort(a, fromIndex, toIndex - 1, 3); } private static void rangeCheck(int length, int fromIndex, int toIndex) { if (fromIndex > toIndex) { throw new IllegalArgumentException("fromIndex(" + fromIndex + ") > toIndex(" + toIndex + ")"); } if (fromIndex < 0) { throw new ArrayIndexOutOfBoundsException(fromIndex); } if (toIndex > length) { throw new ArrayIndexOutOfBoundsException(toIndex); } } private static void swap(int[] a, int i, int j) { int temp = a[i]; a[i] = a[j]; a[j] = temp; } private static void dualPivotQuicksort(int[] a, int left, int right, int div) { int len = right - left; if (len < 27) { // insertion sort for tiny array for (int i = left + 1; i <= right; i++) { for (int j = i; j > left && a[j] < a[j - 1]; j--) { swap(a, j, j - 1); } } return; } int third = len / div; // "medians" int m1 = left + third; int m2 = right - third; if (m1 <= left) { m1 = left + 1; } if (m2 >= right) { m2 = right - 1; } if (a[m1] < a[m2]) { swap(a, m1, left); swap(a, m2, right); } else { swap(a, m1, right); swap(a, m2, left); } // pivots int pivot1 = a[left]; int pivot2 = a[right]; // pointers int less = left + 1; int great = right - 1; // sorting for (int k = less; k <= great; k++) { if (a[k] < pivot1) { swap(a, k, less++); } else if (a[k] > pivot2) { while (k < great && a[great] > pivot2) { great--; } swap(a, k, great--); if (a[k] < pivot1) { swap(a, k, less++); } } } // swaps int dist = great - less; if (dist < 13) { div++; } swap(a, less - 1, left); swap(a, great + 1, right); // subarrays dualPivotQuicksort(a, left, less - 2, div); dualPivotQuicksort(a, great + 2, right, div); // equal elements if (dist > len - 13 && pivot1 != pivot2) { for (int k = less; k <= great; k++) { if (a[k] == pivot1) { swap(a, k, less++); } else if (a[k] == pivot2) { swap(a, k, great--); if (a[k] == pivot1) { swap(a, k, less++); } } } } // subarray if (pivot1 < pivot2) { dualPivotQuicksort(a, less, great, div); } } } At first consider the classic Quicksort scheme and find the average number of comparisons and swaps for it. We assume that input data is random permutation of n numbers from the range [1..n]. Classic Quicksort ================= 1. Choose a pivot element (take random), 2. Compare each (n-1) elements with the pivot 3. and swap it, if necessary, to have the partitions: [ <= pivot | >= pivot ] 4. Sort recursively left and right parts. >From the algorithm above, the average number of comparisons C_n as a function of the number of elements may be represented by the equation: (1) C_n = (n-1) + 1/n * sum_{k=0}^{n-1} {C_k + C_{n-k-1}} and last sum can be rewritten: (2) C_n = (n-1) + 2/n * sum_{k=0}^{n-1} C_k Write formula (2) for n+1: (3) C_{n+1} = n + 2/(n+1) * sum_{k=0}^{n} C_k Multiply (2) by n and (3) by (n+1) and subtract one from other, we have: (4) (n+1)*C_{n+1} - n*C_n = 2*n + 2*C_n Sorting an array of n elements may be considered as selecting one permutation of the n elements among all possible permutations. The number of possible permutations of n elements is n!, so the task for any sorting algorithm is to determine the one permutation out of n! possibilities. The minimum number of operations (swap and comparisons) for sorting n elements is const*ln(n!). >From the Stirling's formula the approximation of the number of operations is A*n*ln(n) + B*n + C, where A, B and C are constant coefficients. The coefficients B and C are not important for large n. Therefore, the function C_n may be approximated by the equation: (5) C_n = A*n*ln(n) The function C_n is substituted from equation (5) into equation (4), which yields the following equation: (6) (n+1)*A*(n+1)*ln(n+1) - n*A*n*ln(n) = 2*n + 2*A*n*ln(n) Using the properties of logarithms, equation (6) can then be reduced to: (7) n*ln(1+1/n) + 2*ln(1+1/n) + (1/n) * ln(n+1) = 2/A Using a property of logarithm: ln(1 + x) -> x, if x -> 0, and other property: ln(n) / n -> 0, when n -> +oo, equation (7) will be approximated by: (8) 1 + 0 + 0 = 2/A So, the coefficient A is equal to 2 and the average number of comparisons in sorting of n size arrays is (9) C_n = 2*n*ln(n). To find the approximation of the average number of swaps, we use the similar approach as in the case of comparisons. The average number of swaps S_n as a function of the number of elements may be represented by the equation: (10) S_n = 1/2*(n-1) + 2/n * sum_{k=0}^{n-1} S_k We assume that average number of swaps during one iteration is 1/2*(n-1). It means that in average one half of elements is swapped only. Using the same approach, we find that the coefficient A equals to 1. Therefore, the function S_n may be approximated by the equation: (11) S_n = n*ln(n) ------------------------------------------------------------------------------- Now consider the Dual-Pivot Quicksort scheme and find the average number of comparisons and swaps for it. We assume that input data is random permutation of n numbers from the range [1..n]. Dual-Pivot Quicksort ==================== 1. Choose 2 pivot elements pivot1 and pivot2 (take random), 2. pivot1 must be less or equal than pivot2, otherwise they are swapped 3. Compare each (n-2) elements with the pivots 4. and swap it, if necessary, to have the partitions: [ <= p1 | p1 <= & <= p2 | >= p2 ] 5. Sort recursively left, center and right parts. >From the algorithm above, the average number of comparisons C_n as a function of the number of elements may be represented by the equation: (1) C_n = 1 + 2/(n*(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + 1*i + C_{j-i-1} + 2*(j-i-1) + C_{n-j-1} + 2*(n-j-1)} Equation (1) means that total number is the sum of the comparison numbers of all cases of partitions into 3 parts plus number of comparisons for elements from left part (one comparison), center and right parts (2 comparisons). It can be rewritten in other way: (2) C_n = 1 + R*(n-2) + 2/(n(n-1)) * sum_{i=0}^{n-2} sum_{j=i+1}^{n-1} {C_i + C_{j-i-1} + C_{n-j-1}} where R is the average number of comparisons during one iteration. This constant R can be found as average value (1 + 2 + 2) / 3 = 5/3, which means that elements from left part are required only one comparison, and elements form center and right parts - two comparisons. The double sum in equation (2) can be reduced: (3) C_n = 1 + 5/3*(n-2) + 2/(n*(n-1)) * sum_{k=0}^{n-2} {3 * (n-k-1) * C_k} Denote 1 + 5/3*(n-2) by f_n and multiply to n*(n-1): (4) n*(n-1)*C_n = n*(n-1)*f_n + 6 * sum_{k=0}^{n-2} {(n-k-1) * C_k} Write formula (4) for n+1: (5) n*(n+1)*C_{n+1} = n*(n+1)*f_n + 6 * sum_{k=0}^{n-1} {(n-k) * C_k} Subtract (4) from (5), we have: (6) n*(n+1)*C_{n+1} - n*(n-1)*C_n = n*(n+1)*f_n - n*(n-1)*f_n + 6 * sum_{k=0}^{n-2} C_k + 6*C_{n-1} Denote n*(n+1)*C_{n+1} - n*(n-1)*C_n by X_n and n*(n+1)*f_n - n*(n-1)*f_n by F_n: (7) X_n = F_n + 6 * sum_{k=0}^{n-2} C_k + 6*C_{n-1} Write formula (7) for n+1: (8) X_{n+1} = F_{n+1} + 6 * sum_{k=0}^{n-1} C_k + 6*C_n Subtract (7) from (8), we have: (9) X_{n+1} - X_n = F_{n+1} - F_n + 6*C_n Resolving of F_{n+1} - F_n gives: (10) X_{n+1} - X_n = 2 + 10*n + 6*C_n The function X_n is substituted into equation (10), which yields the following equation: (11) (n+1)*(n+2)C_{n+2} -2*n(n+1)*C_{n+1} + (n*(n-1) - 6)*C_n = 2 + 10*n We will find the function C_n approximated by the equation: (12) C_n = A*n*ln(n) The function C_n is substituted from equation (12) into equation (11), which yields the following equation: (13) (n^3+5*n^2+8*n+4)*ln(n+2) - (2*n^3+4*n^2+2*n)*ln(n+1) + (n^3-n^2-6*n)*ln(n) = (10*n+2) / A Using the properties of logarithms, equation (13) can then be reduced to: (14) n^3*(ln(n+2)-2*ln(n+1)+ln(n)) + n^2*(5*ln(n+2)-4*ln(n+1)-ln(n)) + n*(8*ln(n+2)-2*ln(n+1)-6*ln(n)) + 4*ln(n+2) = (10*n+2) / A Using a property of logarithm: ln(1 + x) -> x, if x -> 0, and other property: ln(n) / n -> 0, when n -> +oo, equation (15) will be approximated by: (15) -1 + 4 + 2 + 0 + 0 = 10 / A So, the coefficient A is equal to 2 and the average number of comparisons in sorting of n size arrays is (9) C_n = 2*n*ln(n). To find the approximation of the average number of swaps, we use the similar approach as in the case of comparisons. The average number of swaps S_n as a function of the number of elements may be represented by the equation: (10) S_n = 4 + 2/3*(n-2) + 2/(n*(n-1)) * sum_{k=0}^{n-2} {(n-k-1)*S_k} We assume that average number of swaps during one iteration is 2/3*(n-2). It means that in average one third of elements is swapped only. Using the same approach, we find that the coefficient A equals to 0.8. Therefore, the function S_n may be approximated by the equation: (11) S_n = 0.8*n*ln(n) ------------------------------------------------------------------------- And as summary: The value of the coefficient A: dual-pivot classic comparison: 2.0 2.0 swap: 0.8 1.0

14 20

javax.sql.rowset.serial.SerialBlob doesn't support free and getBinaryStream
by Deven You 10 Jan '13

10 Jan '13

Hi All, First of all, if the jdbc problem has a better mailing list to post please tell me. I find that javax.sql.rowset.serial.SerialBlob is not fully implemented in OpenJDK 8. Methods public InputStream getBinaryStream(long pos,long length) throws SQLException public void free() throws SQLException only throw UnsupportedOperationException. I have made a patch[1] to implement these 2 methods. Could anyone take a look to review it. BTW: I think the spec for SerialBlob is not very clear like it doesn't mention if all method rather than free() need throw any exception after free() is invoked. However that behavior seems reasonable. [1] http://cr.openjdk.java.net/~littlee/OJDK-576/webrev Thanks a lot. -- Best Regards, Deven

3 14

Review/comment needed for the new public java.util.Base64 class
by Xueming Shen 30 Nov '12

30 Nov '12

A standard/public API for Base64 encoding and decoding has been long overdue. JDK8 has a JEP [1] for this particular request. Here is the draft proposal to add a public Base64 utility class for JDK8. http://cr.openjdk.java.net/~sherman/4235519/webrev This class basically provides 4 variants of Base64 encoding scheme, (1) the default RFC 4648, which uses standard mapping, no line breaks, (2) the URL-safe RFE 4648, no line breaks, use "-" and "_" to replace "+" and "/" for the mapping (3) the default MIME style, as in RFC 2045 (and its earlier versions), which uses "standard" base64 mapping, a 76 characters per line limit and uses crlf pair \r\n for line break. (4) an extend-able MIME base64, with the char-per-line and the line separator(s) specified by developer. The encoder/decoder now provides encoding and decoding for byte[], String, ByteBuffer and a pair of "EncoderInputStream" and "DecoderOutputStrream", which we believe/hope should satisfy most of the common use cases. Additional method(s) can be added if strongly desired. We tried couple slightly different styles of design for such this "simple" utility class [2]. We kinda concluded that the version proposed probably provides the best balance among readability, usability and extensibility. Please help review and comment on the API and implementation. Thanks! -Sherman [1] http://openjdk.java.net/jeps/135 [2] http://cr.openjdk.java.net/~sherman/base64/

10 45

Code Review Request: 7197662: (prefs) java/util/prefs/AddNodeChangeListener.java fails by timeout or by "couldn't get file lock"
by Kurchi Hazra 30 Nov '12

30 Nov '12

Hi, The tests in java/util/prefs creates new nodes under the user's home directory. This causes the tests to start out with pre-existing preferences and sometimes leads to interference between the tests. This fix is to change the userRoot property for each of these tests so these tests create nodes only under the current directory. Bug: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7197662 Webrev: http://cr.openjdk.java.net/~khazra/7197662/webrev.00/ Thanks, - Kurchi

6 15

What happened to System/Process.getPid() ?
by Thomas L 15 Nov '12

15 Nov '12

I'm sorry if I missed this, but I can't seem to find any information about what happened to the RFE "provide process ID" [1]. This umbrella bug report/RFE is marked as 'fixed', but I can't see that the "getPid" part is included in the current build of JDK8 (build 62). The "process destroy/getPid" RFE was previously listed under JDK8 features, but now it's gone.[2] And I can't find any information about "getPid()" being dropped from JDK8 either. In his review request for the "System.killProcess" part of this RFE, Rob McKenna wrote: "As per the bug report the toString/pid work has been left to be completed separately."[3] What happened to "System/Process.getPid()" ? Is anyone actively working on adding this to JDK8 ? [1]. http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4244896 [2]. http://openjdk.java.net/projects/jdk8/features [3]. http://mail.openjdk.java.net/pipermail/core-libs-dev/2012-April/009816.html Thanks Thomas

5 5

CloneNotSupportedException should extends RuntimeException not Exception
by Remi Forax 02 Nov '12

02 Nov '12

Hi everybody, CloneNotSupportedException is thrown when a developer calls Object.clone() and forget to mark the current object as Cloneable. Because it's clearly a developer error, CloneNotSupportedException should be a subtype of RuntimeException and not of Exception. I believe this change is backward compatible because RuntimeException is a subclass of Exception, so I propose to first change CloneNotSupportedException to extends RuntimeException. diff -r ff641c5b329b src/share/classes/java/lang/CloneNotSupportedException.java --- a/src/share/classes/java/lang/CloneNotSupportedException.java Sat Oct 13 10:15:57 2012 +0100 +++ b/src/share/classes/java/lang/CloneNotSupportedException.java Sun Oct 14 18:16:35 2012 +0200 @@ -42,7 +42,7 @@ */ public -class CloneNotSupportedException extends Exception { +class CloneNotSupportedException extends RuntimeException { private static final long serialVersionUID = 5195511250079656443L; /** And then to clean up the whole JDK (in several patches) to remove all the unnecessary try/catch like the one in by example ArrayList.clone() public Object clone() { try { ArrayList<?> v = (ArrayList<?>) super.clone(); v.elementData = Arrays.copyOf(elementData, size); v.modCount = 0; return v; } catch (CloneNotSupportedException e) { // this shouldn't happen, since we are Cloneable throw new InternalError(e); } } will become public Object clone() { ArrayList<?> v = (ArrayList<?>) super.clone(); v.elementData = Arrays.copyOf(elementData, size); v.modCount = 0; return v; } cheers, Rémi

9 15

about JavaOne2012 Finding and Solving Java Deadlocks
by fuyou 01 Nov '12

01 Nov '12

hi all I am very interested in session of HOL6500 - Finding and Solving Java Deadlocks(JavaOne 2012) .how can i watch video or download slides. Thanks! -- ============================================= fuyou001 Best Regards

5 5

Review request for 8001536
by Lance Andersen - Oracle 01 Nov '12

01 Nov '12

Hi, This is a request for review of http://cr.openjdk.java.net/~lancea/8001536/webrev.00/. This adds read/writeObject as well as clone methods to SerialXLob classes. All SQE tests passed, 1 failure in the RowSet JCK/TCK tests due to a bug in the test that the TCK team is aware of and will address. JDBC Unit tests all pass . Best Lance Lance Andersen| Principal Member of Technical Staff | +1.781.442.2037 Oracle Java Engineering 1 Network Drive Burlington, MA 01803 Lance.Andersen(a)oracle.com

4 11

RFR: 7050936: (pack200) Support version 52.0 class files
by Kumar Srinivasan 01 Nov '12

01 Nov '12

Hi, Please review change which allows pack200 to recognize the class file v52.0. Bug is here: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7050936 Webrev is here: http://cr.openjdk.java.net/~ksrini/7050936/webrev.0/ Thanks Kumar

2 2

Review Request: CR#8001634 : Initial set of lambda functional interfaces
by Mike Duigou 01 Nov '12

01 Nov '12

There's a large set of library changes that will be coming with Lambda. We're getting near the end of the runway and there's lots left to do so we want to start the process of getting some of the more stable pieces put back to the JDK8 repositories. We've spent a some time slicing things into manageable chunks. This is the first bunch. We'd like to time-box this review at one week, since there are many more pieces to follow. The first chunk is the basic set of functional interface types. While this set is not complete, it is enough to be able to proceed on some other pieces. This set contains no extension methods (we'll do those separately) and does not contain all the specializations we may eventually need. The specification is limited; most of the interesting restrictions (side-effect-freedom, idempotency, stability) would really be imposed not by the SAM itself by by how the SAM is used in a calculation. However, some common doc for "how to write good SAMs" that we can stick in the package doc would be helpful. Suggestions welcome. Elements of this naming scheme include: - Each SAM type has a unique (arity, method name) pair. This allows SAMs to implement other SAMs without collision. - The argument lists are structured so that specializations act on the first argument(s), so IntMapper<T> is a specialization of Mapper<R,T>, and IntBinaryOperator is a specialization of BinaryOperator<T>. In order to get the most useful feedback out of this review, we'd like to ask you follow the following guidelines for the review: - We are time-boxed at one week. (until Nov. 7th) - Please review the whole bunch in a single message if possible, rather than in bits and pieces. It is far easier to extract useful feedback from one complete review than from a dozen partial ones. - Please wait a few days before replying to other people's reviews! We want to keep the discussion on-topic to maximize the useful review content. It is far too easy for the discussion to spiral off into minutia and lose sight of the goal -- which is to provide useful feedback on the API we're asking for feedback on. http://cr.openjdk.java.net/~mduigou/8001634/2/webrev/

6 5