Building OpenJDK9 on MSYS2
Peter Budai
peterbudai at hotmail.com
Mon Nov 27 11:12:22 UTC 2017
MSYS2 or Cygwin should be similar from the technical point of view IMHO. I’m familiar with MSYS2, but not with Cygwin.
The big change as you called out is to make sure that gcc toolchain can build successfully also for a Windows platform and produce a properly working binaries.
BTW I don’t belie there are big performance differences whether you are building with GCC or MSC
Once again, please advise on what is the best way to move forward, or stop this effort.
Peter
________________________________
From: Thomas Stüfe <thomas.stuefe at gmail.com>
Sent: Thursday, November 23, 2017 10:36:07 PM
To: Lussier, Denis
Cc: Jonathan Gibbons; build-dev at openjdk.java.net; Peter Budai
Subject: Re: Building OpenJDK9 on MSYS2
On Thu, Nov 23, 2017 at 12:40 AM, Lussier, Denis <denisl at bigsql.com<mailto:denisl at bigsql.com>> wrote:
This is good stuff. Back in 2010 I got OpenJDK compiled and running on the
Microsoft Toolchain. I never ran the jtreg tests, but, the binaries
worked for running basic Tomcat but definitely not for trying to run
Eclipse.
These days I am a pretty big fan of MSYS2. In my personal experiences with
building a PostgreSQL Windoze distribution, the MSYS2 binaries run a little
faster than using the old MS Toolchain.
https://www.openscg.com/2016/02/building-postgresql-on-windows-for-performance/
Well, the linked article does claim the msys2 toolchain to be faster than the Visual Studio, but there are no information I can see which compiler and linker options were used. Without this information, the article is difficult to take seriously.
While I really respect these efforts, I regret seeing the fragmentation in windows build environments. I rather have one well kept build environment than of multiple buggy ones - and we have not that many folks interested in the windows port in the first place (it always feels like second place to the Posix platforms to me). The official build environment of the openjdk windows port is Cygwin + Visual Studio. Even if we think the gcc toolchain would be an attractive alternative to VS - why not just use the cygwin gcc instead? That way we would at least share the same posix layer.
Just my 5c.
Kind Regards, Thomas
--Luss
On Wed, Nov 22, 2017 at 4:28 PM, Jonathan Gibbons <
jonathan.gibbons at oracle.com<mailto:jonathan.gibbons at oracle.com>> wrote:
> Peter,
>
> With over 120 :tier1 test failures, it would be worth understanding the
> test failures as part of moving forward. There should normally be no :tier1
> test failures.
>
> -- Jon
>
>
>
>
> On 11/22/2017 01:10 PM, Peter Budai wrote:
>
>> Let me give an update on the current status:
>>
>> * I have managed to build both the 64 and the 32-bit version.
>> * The 64-bit version seems reasonable:
>>
>>
>>
>> ==============================
>>
>> Test summary - w64-bit
>>
>> ==============================
>>
>> TEST TOTAL PASS FAIL
>> ERROR
>>
>> jtreg:jdk/test:tier1 1645 1610 34 1
>>>> <<
>>>> jtreg:langtools/test:tier1 3907 3819 79
>>>> 9 <<
>>>>
>>> jtreg:nashorn/test:tier1 0 0 0
>> 0
>>
>> jtreg:jaxp/test:tier1 0 0 0
>> 0
>>
>> ==============================
>>
>> * However the 32-bit version of hotspot contains a bunch of inline
>> assembly pieces which uses an MSC specific syntax, and my ASM knowledge is
>> really limited. I have managed to get a many inline assembly codes from the
>> Linux version, but there are few pieces where I was not able to find a good
>> solution yet, so although the 32-bit version compiles, unfortunately it is
>> not working
>> * I have installed VS Express 2013 and made sure that the
>> “traditional” Microsoft toolchain is still working with the changes
>> * My OCA has been processed
>>
>> I have a changeset which cleanly applies to JDK9 v181, but I recall you
>> have mentioned earlier that you would like to consider this to JDK10
>>
>> So what is the best way to open a PR for review? This page:
>> http://openjdk.java.net/contribute/ says I should send the changeset as
>> attachment, but earlier somebody mentioned here that attachments are
>> removed from the developer mailing lists.
>>
>> Best regards,
>>
>> Peter
>>
>> From: Erik Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>
>> Sent: Thursday, November 2, 2017 1:07 AM
>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; Magnus Ihse
>> Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>> Cc: build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>> Subject: Re: Building OpenJDK9 on MSYS2
>>
>> I would say a few hours is way too long for tier1, but it of course
>> depends on the hardware used. We typically run it on windows in less
>> than 30 minutes with concurrency set to 6. Not sure what concurrency you
>> used by default.
>>
>> /Erik
>>
>>
>> On 2017-10-27 04:33, Peter Budai wrote:
>>
>>> Hi Magnus, after a little poking I managed to install and use jtreg,
>>> thanks for the guidance.
>>>
>>> Make run-test-tier1 resulted a pretty OK result for a first try, at
>>> least for run-test-jdk:
>>> Test results: passed: 1,610; failed: 34; error: 1
>>> It took a few hors to run – is that normal?
>>>
>>> I’ll review the patchset, and then share that with you.
>>>
>>> P.
>>>
>>> From: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>>> Sent: Thursday, October 26, 2017 11:00 AM
>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>> Cc: build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>
>>>
>>> On 2017-10-26 00:01, Peter Budai wrote:
>>> OK, I have found what was missing, it was actually my fault with a
>>> missing exception handler.
>>>
>>> So finally OpenJDK build has finished on Windows using gcc toolchain
>>> running in MSYS2/MINGW64 shell. I ran hotspot unit tests, and it looks
>>> promising:
>>> ./build/windows-x86_64-normal-server-fastdebug/hotspot/varia
>>> nt-server/libjvm/gtest/gtestLauncher.exe --jdk=/home/peterbud/jdk9/buil
>>> d/windows-x86_64-normal-server-fastdebug/jdk
>>> ….
>>> ….
>>> ….
>>>
>>> [----------] Global test environment tear-down
>>> [==========] 346 tests from 54 test cases ran. (3859 ms total)
>>> [ PASSED ] 346 tests.
>>> I'm impressed! :-)
>>>
>>> Would you care to share your current patchset, just to still my
>>> curiosity? :-)
>>>
>>>
>>>
>>> What is the best way to test the current build more thoroughly?
>>> "make run-test-tier1". As Erik says, you'll need jtreg, and call
>>> "configure --with-jtreg=...". You can get it from the Adopt OpenJDK group
>>> here: https://adopt-openjdk.ci.cloudbees.com/job/jtreg/lastSuccess
>>> fulBuild/artifact/
>>>
>>> /Magnus
>>>
>>>
>>> P.
>>>
>>> From: Bob Vandette<mailto:bob.vandette at oracle.com<mailto:bob.vandette at oracle.com>>
>>> Sent: Tuesday, October 24, 2017 8:10 PM
>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>> Cc: David Holmes<mailto:david.holmes at oracle.com<mailto:david.holmes at oracle.com>>; Erik Joelsson<mailto:
>>> erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; Magnus Ihse Bursie<mailto:magnus.ihse.burs<mailto:magnus.ihse.burs>
>>> ie at oracle.com<mailto:ie at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:
>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>
>>> Can you provide some details about your toolchain, processor and os plus
>>> a dump of the native instructions around the SEGV. This might give us
>>> enough info to be able to figure out what’s going on.
>>>
>>> Bob.
>>>
>>> On Oct 24, 2017, at 1:21 PM, Peter Budai <peterbudai at hotmail.com<mailto:peterbudai at hotmail.com><mailto:
>>> peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>> wrote:
>>>
>>> I get that error running in the debugger but also running
>>> without/outside of the debugger as well.
>>>
>>> I saw the comment in the code about generating SEGV in function
>>> generate_get_cpu_info(), however the debugger can execute that, and the
>>> SEGV I experience is coming later in the VM_Version::get_processor_features()
>>> function
>>>
>>> Peter
>>>
>>> From: Bob Vandette<mailto:bob.vandette at oracle.com<mailto:bob.vandette at oracle.com>>
>>> Sent: Tuesday, October 24, 2017 6:28 PM
>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>> Cc: David Holmes<mailto:david.holmes at oracle.com<mailto:david.holmes at oracle.com>>; Erik Joelsson<mailto:
>>> erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; Magnus Ihse Bursie<mailto:magnus.ihse.burs<mailto:magnus.ihse.burs>
>>> ie at oracle.com<mailto:ie at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:
>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>
>>> Was this a SEGV while you were running the debugger?
>>>
>>> There is an intentional SEGV generated. This is used to determine if we
>>> can use some of newer
>>> CPU features. Try to allow the SEGV to continue to see if you run
>>> normally.
>>>
>>> Bob.
>>>
>>>
>>> On Oct 24, 2017, at 11:37 AM, Peter Budai <peterbudai at hotmail.com<mailto:peterbudai at hotmail.com><mailto
>>>> :peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>> wrote:
>>>>
>>>> It seems that the compile is progressing well, I have 49
>>>> executables/tools and 38 compiled shared libraries already in the JDK
>>>> folder.
>>>>
>>>> I have tried to run the product with the simplest ‘java -version’
>>>> command, however I get a SIGSEGV at get_cpu_info_stub() in
>>>> vm_version_x86.cpp, VM_Version::get_processor_features()
>>>>
>>>> get_cpu_info_stub(&_cpuid_info);
>>>>
>>>> Thread 5 received signal SIGSEGV, Segmentation fault.
>>>> 0x000000002d9a072f in ?? ()
>>>>
>>>> I can debug using gdb, but unfortunately this is pure ASM, and my
>>>> knowledge on this is close to 0.
>>>>
>>>> Any idea help or pointer how could I tackle this?
>>>>
>>>> Peter
>>>>
>>>> From: David Holmes<mailto:david.holmes at oracle.com<mailto:david.holmes at oracle.com>>
>>>> Sent: Sunday, October 15, 2017 10:37 PM
>>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; Erik Joelsson<mailto:
>>>> erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; Magnus Ihse Bursie<mailto:magnus.ihse.burs<mailto:magnus.ihse.burs>
>>>> ie at oracle.com<mailto:ie at oracle.com>>
>>>> Cc: build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>
>>>> ><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>
>>>> On 16/10/2017 12:41 AM, Peter Budai wrote:
>>>>
>>>>> A quick status update:
>>>>>
>>>>> * Hotspot successfully compiled without warnings
>>>>> * I’d like to run the unit tests, but as I see ‘make check’ does
>>>>> not work, and gtestlauncher expects a command line parameter jdk. Tried to
>>>>> look up some documentation on this, but have not found. So the question is:
>>>>> how can I run unit tests for hotspot? Do I need also JDK compiled for that?
>>>>> Or the bootJDK is good enough? Any help would be appreciated.
>>>>>
>>>> Hotspot has to be tested as part of a full JDK - you can't load the JVM
>>>> without having the "J" part :)
>>>>
>>>> You should be able to drop your built dll into an existing JDK 9 windows
>>>> JDK and test it that way.
>>>>
>>>> David
>>>> -----
>>>>
>>>> * Also I’m making progress on compiling jdk, but there are some
>>>>> very interesting solutions on windows linking which makes a bit more
>>>>> difficult to compile with gcc: LIBS_windows contains sometimes simple
>>>>> library names (which I believe is correct) and other times library names
>>>>> with full path (which I believe is not the best solution). I’m trying to
>>>>> rework those places and use simple library names and passing search path
>>>>> for libraries -L<path> (for gcc toolchain) and /LIBPATH:<path> (for
>>>>> Microsoft toolchain). Also I was surprised by a few manual function name
>>>>> exports…
>>>>> * jdk code base contains apparently more MSVC specific part,
>>>>> many places casts/lack of casts are generating errors, static attributes
>>>>> were missing etc. a bit tedious work.
>>>>>
>>>>> P.
>>>>>
>>>>> From: Erik Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>
>>>>> Sent: Wednesday, October 11, 2017 4:16 PM
>>>>> To: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>; Peter
>>>>> Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>>>> Cc: build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>
>>>>> ><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>
>>>>> Hello,
>>>>>
>>>>> On 2017-10-11 15:48, Magnus Ihse Bursie wrote:
>>>>>
>>>>> For gcc, we let the compiler generate the .d file. For the Microsoft
>>>>> tool chain, we use a clever sed script to extract and create it ourself.
>>>>>
>>>>> I think that logic is checking for "Windows", not "Microsoft". That
>>>>> might be your cause of trouble.
>>>>>
>>>>> Look in NativeCompilation.gmk.
>>>>>
>>>>> That was my initial thought as well, but we do correctly check for
>>>>> microsoft. Also it's not the .d files that are the problem. As Peter just
>>>>> wrote, they look fine. It's the .d.target files which we create using the
>>>>> same technique on all platforms. What we don't account for is the compiler
>>>>> putting Windows mixed paths in the .d files.
>>>>>
>>>>> /Magnus
>>>>>
>>>>> 11 okt. 2017 kl. 14:43 skrev Peter Budai <peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>
>>>>> <mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>><mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>>:
>>>>> Hi Erik,
>>>>>
>>>>> The .d file looks like this:
>>>>> C:/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/hotspot/variant-server/tools/adlc/objs/adlparse.obj: \
>>>>> C:/msys64/home/peterbud/jdk9/hotspot/src/share/vm/adlc/adlparse.cpp \
>>>>>
>>>>> I have checked .d.targets file, and looks like it has the first line
>>>>> has not been deleted, and the file names below are also wrong:
>>>>> /msys64/home/peterbud/jdk9/build/windows-x86_64-normal-serve
>>>>> r-release/hotspot/variant-server/tools/adlc/objs/adlparse.obj : :
>>>>> /msys64/home/peterbud/jdk9/hotspot/src/share/vm/adlc/adlparse.cpp :
>>>>> /msys64/home/peterbud/jdk9/hotspot/src/share/vm/adlc/adlc.hpp :
>>>>>
>>>>> I guess this part in the DEPENDENCY_TARGET_SED_PATTERN is fooled by
>>>>> the “C:/”
>>>>> -e 's/^[^:]*: *//'
>>>>>
>>>>> Yes, that does indeed look like the problem. I suppose the regexp is
>>>>> unnecessarily strict. It should be ok to rewrite it as something like this:
>>>>> -e 's/^.*: *//'
>>>>>
>>>>> Basically just make sure it ends with : and any number of spaces.
>>>>>
>>>>> /Erik
>>>>>
>>>>>
>>>>>
>>>>> Peter
>>>>>
>>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>>>>> Windows 10
>>>>>
>>>>> From: Erik Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>
>>>>> Sent: Wednesday, October 11, 2017 12:16 PM
>>>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; Magnus Ihse
>>>>> Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>;
>>>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:
>>>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>
>>>>>
>>>>> Hello Peter,
>>>>>
>>>>> On 2017-10-11 00:18, Peter Budai wrote:
>>>>> Thanks Magnus & Erik
>>>>>
>>>>> First thanks for your support and kind words!
>>>>>
>>>>> Magnus, I have checked .bash_profile, .bashrc but they seem to be
>>>>> empty (everything is commented out). You can check with a default MSYS2
>>>>> install, I have not changed these files at all. If you find thee something
>>>>> specific I can give a try here as well.
>>>>>
>>>>> Let me give also a quick status update, where am I with building
>>>>> hotspot:
>>>>> · I guess its still the beginning, but I have managed to compile
>>>>> jvm.dll with almost 700 object file: with debug info the dll is around 700
>>>>> MB 😊
>>>>> · I made only surgical, minimal changes to the source, and so
>>>>> far it looks reasonable. I have encountered 3 scenarios where changes were
>>>>> necessary:
>>>>> o When in makefiles conditionals were using assuming that if
>>>>> target_os is windows then it is visual studio compiler/linker. Obviously
>>>>> these conditionals had to be reviewed in a few places and if necessary were
>>>>> changes to check the toolchain=Microsoft
>>>>> These are not surprising and should be pretty straight forward to fix
>>>>> and it seems you know what to do.
>>>>>
>>>>>
>>>>> ·
>>>>> o I got a few warnings as gcc 7.2 uncovered some code problems in
>>>>> windows specific codes, where before that MSVC I guess did not say a word…
>>>>> To get around this you can configure with --disable-warnings-as-errors
>>>>> until you get things working properly. This is commonly needed when using
>>>>> compiler versions that we normally don't use.
>>>>>
>>>>>
>>>>> ·
>>>>> o And I had like 6-7 places where the code was using MSVC specific
>>>>> __try … __except structures which gcc does not know. Do you have a
>>>>> suggestion how to approach them? I can do ugly #ifdefs (I would avoid that)
>>>>> but I have also seen some solutions to replace them with a code which gcc
>>>>> can compile (http://www.programmingunlimited.net/siteexec/content.cgi?
>>>>> page=mingw-seh ) – but before doing that though I would ask first
>>>>> you on the purpose of those
>>>>> This kind of question is probably best to bring to the hotspot mailing
>>>>> list.
>>>>> · What bothers me is that I was not able to do incremental
>>>>> builds: when an error occurs, and build stops, then after making change in
>>>>> the CPP source the build cannot continue, I always got an error message:
>>>>>
>>>>> /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/hotspot/variant-server/tools/adlc/objs/adlparse.d.targets:1:
>>>>> *** missing target pattern. Stop.
>>>>> make[2]: *** [make/Main.gmk:256: hotspot-server-gensrc] Error 2
>>>>>
>>>>> If I do a ‘make clean’ and restart the build then it nicely compiles.
>>>>>
>>>>> Question 1: Is there a way to resume such builds without ‘make clean’?
>>>>> Well, incremental builds is supposed to work well. We have several
>>>>> extra tricks in there to handle cases where normal make builds would fail.
>>>>> The *.d.targets files is one such trick and it seems to backfire for you.
>>>>> The contents of that file should be something like:
>>>>>
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/adlparse.cpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/adlc.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/opto/opcodes.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/opto/classes.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/arena.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/opto/adlcVMDeps.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/filebuff.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/dict2.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/forms.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/formsopt.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/formssel.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/archDesc.hpp :
>>>>> /localhome/hg/jdk9-dev/hotspot/src/share/vm/adlc/adlparse.hpp :
>>>>>
>>>>> Basically an empty rule for each dependency for the corresponding
>>>>> object file. Declaring these rules makes it possible to delete source files
>>>>> without having to build clean. It seems your file is not generated
>>>>> correctly so please have a look inside it. The file is in
>>>>> make/common/NativeCompilation.gmk, look for
>>>>> DEPENDENCY_TARGET_SED_PATTERN.
>>>>>
>>>>>
>>>>>
>>>>> Question 2: What would be the best way to submit/share the patches for
>>>>> your thorough review?
>>>>>
>>>>> Well, first of all, have you signed the OCA?
>>>>>
>>>>> As for publishing patches and reviews, there is a bit of chicken and
>>>>> egg problem. Once you become an "author" in any of the OpenJDK projects,
>>>>> you get a user name and should be able to publish reviews on
>>>>> cr.openjdk.java.net<http://cr.openjdk.java.net><http://cr.openjdk.java.net/><http://cr.o
>>>>> penjdk.java.net<http://penjdk.java.net><http://cr.openjdk.java.net/<http://cr.openjd
>>>>> k.java.net/%3e%3chttp:/cr.openjdk.java.net%3chttp:/cr<http://k.java.net/%3e%3chttp:/cr.openjdk.java.net%3chttp:/cr>.
>>>>> openjdk.java.net/<http://openjdk.java.net/>>>>. Before that, if the patch is small, it can be
>>>>> posted inline in an email to the list. If it's large, you will need a
>>>>> current OpenJDK user to host it for you. At least that's how I understand
>>>>> it. Hopefully someone who knows the process better can chime in here.
>>>>>
>>>>> I should also let you know that getting this into JDK 9 is most likely
>>>>> not going to happen. AFAIK we are only doing security updates for 9. It
>>>>> would have to go into the currently active release. I should also warn you
>>>>> that new ports generally need a certain amount of backing to be accepted.
>>>>> It may be that this would have to live in a porting side project. Hopefully
>>>>> someone who knows this better can chime in here as well.
>>>>>
>>>>> /Erik
>>>>>
>>>>>
>>>>> P.
>>>>>
>>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>>>>> Windows 10
>>>>>
>>>>> From: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>>>>> Sent: Tuesday, October 10, 2017 10:04 AM
>>>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; Erik Joelsson<mailto:
>>>>> erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:
>>>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>
>>>>> On 2017-10-07 10:14, Peter Budai wrote:
>>>>> The configure of OpenJDK overwrites the SHELL. Actually it is using
>>>>> bash, but for the arguments it was using “-e -o pipefail”. I have figured
>>>>> that for MSYS2 bash what is needed as bash arguments is “-e -l -c -o
>>>>> pipefail”
>>>>>
>>>>> That looks like solving this problem, and now the real issues are
>>>>> surfacing.
>>>>>
>>>>> FWIW, "-l" makes bash behave like a login shell. Most likely you are
>>>>> changing bash's behavior in one of your login scripts, and that change is
>>>>> what's really needed.
>>>>>
>>>>> /Magnus
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Peter
>>>>>
>>>>> From: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>>>> Sent: Friday, October 6, 2017 6:43 PM
>>>>> To: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>; Erik
>>>>> Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>
>>>>> <mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: RE: Building OpenJDK9 on MSYS2
>>>>>
>>>>> Magnus,
>>>>>
>>>>> I have followed your suggestion and removed the fixpath prefixes from
>>>>> gcc related compile tools, and left only the fixpath prefix _only_ for the
>>>>> Boot JDK related tools in place.
>>>>>
>>>>> 1) As I follow the process, all java and javac related compile
>>>>> steps are running properly
>>>>> 2) When the process reaches gcc related steps I got the error
>>>>> message at the same place as before (no fixpath). If I execute that command
>>>>> from the bash prompt, it creates the output:
>>>>>
>>>>> $ ( /usr/bin/gawk '/@@END_COPYRIGHT@@/{exit}1'
>>>>> /C/msys64/home/peterbud/jdk9/jdk/src/java.base/share/classes
>>>>> /sun/nio/ch/SocketOptionRegistry.java.template &&
>>>>> /C/msys64/mingw64/bin/gcc -E -x c /C/msys64/home/peterbud/jdk9/j
>>>>> dk/src/java.base/share/classes/sun/nio/ch/SocketOptionRegistry.java.template
>>>>> 2> >(/usr/bin/grep -v '^SocketOptionRegistry.java.template$' >&2) |
>>>>> /usr/bin/gawk '/@@START_HERE@@/,0' | /usr/bin/sed -e 's/@@START_HERE@@/\/\/
>>>>> AUTOMATICALLY GENERATED FILE - DO NOT EDIT/' -e 's/PREFIX_//' -e 's/^#.*//'
>>>>> ) > /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/support/gensrc/java.base/sun/nio/ch/SocketOption
>>>>> Registry.java
>>>>>
>>>>> As I have mentioned the parameters are replaced by the bash
>>>>> automatically
>>>>> 3) Then build continues, then little later stops at a super
>>>>> simple command:
>>>>>
>>>>> mv /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/support/gensrc/java.base/java/nio/ByteBuffer.java.tmp
>>>>> /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/support/gensrc/java.base/java/nio/ByteBuffer.java
>>>>> Needless to say, the ByteBuffer.java.tmp file DOES exist.
>>>>> And running the above command from the bash works, and build continues.
>>>>> 4) A few similar cases (stops) with DirectByteBuffer and
>>>>> DirectByteBufferR
>>>>>
>>>>>
>>>>> Currently I try to explore how that might relate to the MSYS2 bash and
>>>>> make, somehow it behaves differently
>>>>>
>>>>> If you have any other suggestion, let me know.
>>>>>
>>>>> Best regards,
>>>>>
>>>>> Peter
>>>>>
>>>>> From: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>
>>>>> Sent: Thursday, October 5, 2017 3:52 PM
>>>>> To: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>; Erik
>>>>> Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>
>>>>> <mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: RE: Building OpenJDK9 on MSYS2
>>>>>
>>>>> Hi Magnus,
>>>>>
>>>>> So first of all, here is the current patch, which I was not able to
>>>>> attach: https://pastebin.com/pwT4Ynxc
>>>>>
>>>>> That's surprising, since gcc is prefixed with fixpath, which it should
>>>>>>> not.
>>>>>>>
>>>>>> Actually you DO need fixpath IMHO.
>>>>> This is a mingw64 version of the gcc (/C/msys64/mingw64/bin/gcc),
>>>>> which is a fully functional Windows executable, which expects Windows
>>>>> formatted path arguments.
>>>>> As the updated build process uses EXPORT MSYS2_ARG_CONV_EXCL=* (see
>>>>> that patch), none of the command line arguments are converted from the
>>>>> unix path to Windows, but fixpath does that conversion. There is a wiki
>>>>> describing more details on this:
>>>>> https://github.com/msys2/msys2/wiki/Porting#user-content-
>>>>> filesystem-namespaces
>>>>>
>>>>>
>>>>>
>>>>> I have a hard time believing this is a race condition. On the other
>>>>>>> hand, this stuff is weird, we're misusing the C preprocessor to process
>>>>>>> defines in java code, so I'm not surprised it breaks down.
>>>>>>> I don't know why it succeeded when run on the command line, though.
>>>>>>>
>>>>>> When I execute that command from the bash command line there is no
>>>>> EXPORT MSYS2_ARG_CONV_EXCL, but the bash itself does the automatic
>>>>> conversion of the arguments. Maybe it has something to do how fixpath does
>>>>> CreateProcess?
>>>>>
>>>>> Does that help?
>>>>>
>>>>> Best regards,
>>>>>
>>>>> Peter
>>>>>
>>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>>>>> Windows 10
>>>>>
>>>>> From: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>>>>> Sent: Thursday, October 5, 2017 12:13 PM
>>>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; Erik Joelsson<mailto:
>>>>> erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:
>>>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>
>>>>>
>>>>> On 2017-10-05 11:59, Peter Budai wrote:
>>>>> Hi Magnus and Erik,
>>>>>
>>>>> I really appreciate your quick feedback. I assumed that it won’t be
>>>>> easy, but I just don’t feel I should give up now - maybe later when I see
>>>>> the real scale of work. So bear with me for a time being.
>>>>>
>>>>> Attached is a patch which already includes Magnus’ changes, plus a few
>>>>> which I have added:
>>>>> · basically enabling gcc for windows,
>>>>> · and modifying a logic for compiling fixpath (before that it
>>>>> was using hard-coded MS VSC compile flags)
>>>>>
>>>>> Actually, you must make sure fixpath is *not* used for the toolchain,
>>>>> since gcc uses unix style paths.
>>>>> (However, other tools such as java will still need it.)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> So here is what I have as the result of configure:
>>>>> ====================================================
>>>>> The existing configuration has been successfully updated in
>>>>> /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release
>>>>> using configure arguments '--disable-freetype-bundling
>>>>> --disable-javac-server'.
>>>>>
>>>>> Configuration summary:
>>>>> * Debug level: release
>>>>> * HS debug level: product
>>>>> * JDK variant: normal
>>>>> * JVM variants: server
>>>>> * OpenJDK target: OS: windows, CPU architecture: x86, address length:
>>>>> 64
>>>>> * Version string: 9-internal+0-adhoc.peterbud.jdk9 (9-internal)
>>>>>
>>>>> Tools summary:
>>>>> * Environment: msys version 2.9.0(0.318/5/3) (root at /C/msys64)
>>>>> * Boot JDK: java version "1.8.0_144" Java(TM) SE Runtime
>>>>> Environment (build 1.8.0_144-b01) Java HotSpot(TM) 64-Bit Server VM (build
>>>>> 25.144-b01, mixed mode) (at /c/progra~1/java/jdk18~1.0_1)
>>>>> * Toolchain: gcc (GNU Compiler Collection)
>>>>> * C Compiler: Version 7.2.0 (at /C/msys64/mingw64/bin/gcc)
>>>>> * C++ Compiler: Version 7.2.0 (at /c/msys64/mingw64/bin/g++)
>>>>>
>>>>> Build performance summary:
>>>>> * Cores to use: 4
>>>>> * Memory limit: 16216 MB
>>>>>
>>>>> Its clear says that the toolchain is gcc 7.2 (BTW there is no Visual
>>>>> Studio on this machine)
>>>>>
>>>>> Now for the details of the config log, you can see here:
>>>>> https://pastebin.com/MN2ZYcHH
>>>>>
>>>>> And about the build process and the error I get:
>>>>>
>>>>> $ make JOBS=1
>>>>> Building target 'default (exploded-image)' in configuration
>>>>> 'windows-x86_64-normal-server-release'
>>>>> Compiling 8 files for BUILD_TOOLS_LANGTOOLS
>>>>> Compiling 17 properties into resource bundles for jdk.compiler
>>>>> Parsing 1 properties into enum-like class for jdk.compiler
>>>>> Compiling 19 properties into resource bundles for jdk.javadoc
>>>>> Compiling 12 properties into resource bundles for jdk.jdeps
>>>>> Compiling 7 properties into resource bundles for jdk.jshell
>>>>> Compiling 117 files for BUILD_INTERIM_java.compiler
>>>>> Compiling 396 files for BUILD_INTERIM_jdk.compiler
>>>>> Compiling 61 files for BUILD_INTERIM_jdk.jdeps
>>>>> Compiling 457 files for BUILD_INTERIM_jdk.javadoc
>>>>> Note: Some input files use or override a deprecated API.
>>>>> Note: Recompile with -Xlint:deprecation for details.
>>>>> Compiling 159 files for BUILD_TOOLS_JDK
>>>>> Note: Some input files use unchecked or unsafe operations.
>>>>> Note: Recompile with -Xlint:unchecked for details.
>>>>> make[3]: *** [GensrcMisc.gmk:78: /C/msys64/home/peterbud/jdk9/b
>>>>> uild/windows-x86_64-normal-server-release/support/gensrc/jav
>>>>> a.base/sun/nio/ch/SocketOptionRegistry.java] Error 1
>>>>> make[3]: *** Deleting file '/C/msys64/home/peterbud/jdk9/
>>>>> build/windows-x86_64-normal-server-release/support/gensrc/ja
>>>>> va.base/sun/nio/ch/SocketOptionRegistry.java'
>>>>> make[2]: *** [make/Main.gmk:115: java.base-gensrc-jdk] Error 2
>>>>>
>>>>> ERROR: Build failed for target 'default (exploded-image)' in
>>>>> configuration 'windows-x86_64-normal-server-release' (exit code 2)
>>>>>
>>>>> No indication of failed target found.
>>>>> Hint: Try searching the build log for '] Error'.
>>>>> Hint: See common/doc/building.html#troubleshooting for assistance.
>>>>>
>>>>> make[1]: *** [/home/peterbud/jdk9/make/Init.gmk:296: main] Error 2
>>>>> make: *** [/home/peterbud/jdk9/make/Init.gmk:185: default] Error 2
>>>>>
>>>>> If I run here
>>>>> make JOBS=1 LOG=debug
>>>>> The failing line seems to be this:
>>>>>
>>>>> ( /usr/bin/gawk '/@@END_COPYRIGHT@@/{exit}1'
>>>>> /C/msys64/home/peterbud/jdk9/jdk/src/java.base/share/classes
>>>>> /sun/nio/ch/SocketOptionRegistry.java.template &&
>>>>> /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/configure-support/bin/fixpath.exe
>>>>> -m/C/msys64/@/c/msys64/@/c/progra~ /C/msys64/mingw64/bin/gcc -E -x c
>>>>> /C/msys64/home/peterbud/jdk9/jdk/src/java.base/share/classes
>>>>> /sun/nio/ch/SocketOptionRegistry.java.template 2> >(/usr/bin/grep -v
>>>>> '^SocketOptionRegistry.java.template$' >&2) | /usr/bin/gawk
>>>>> '/@@START_HERE@@/,0' | /usr/bin/sed -e 's/@@START_HERE@@/\/\/
>>>>> AUTOMATICALLY GENERATED FILE - DO NOT EDIT/' -e 's/PREFIX_//' -e 's/^#.*//'
>>>>> ) > /C/msys64/home/peterbud/jdk9/build/windows-x86_64-normal-ser
>>>>> ver-release/support/gensrc/java.base/sun/nio/ch/SocketOption
>>>>> Registry.java
>>>>> make[3]: *** [GensrcMisc.gmk:78: /C/msys64/home/peterbud/jdk9/b
>>>>> uild/windows-x86_64-normal-server-release/support/gensrc/jav
>>>>> a.base/sun/nio/ch/SocketOptionRegistry.java] Error 1
>>>>>
>>>>> Now the interesting is: if I copy this line above to the bash prompt,
>>>>> it runs without problem, and the file support/gensrc/java.base/sun/n
>>>>> io/ch/SocketOptionRegistry.java
>>>>> That's surprising, since gcc is prefixed with fixpath, which it should
>>>>> not.
>>>>>
>>>>> I have a hard time believing this is a race condition. On the other
>>>>> hand, this stuff is weird, we're misusing the C preprocessor to process
>>>>> defines in java code, so I'm not suprised it breaks down. I don't know why
>>>>> it succeeded when run on the command line, though. My suggestion is to just
>>>>> do some quick and dirty hack around this: take the file you manage to
>>>>> generate and just copy it in during the build instead. If you can get round
>>>>> this, you might start seeing some *real* problems. :-)
>>>>>
>>>>> Also, my suggestion is that you try running "make hotspot" to cut to
>>>>> the chase. Compiling hotspot will likely be the hardest thing. Or even
>>>>> "make -k hotspot" to get an assessment of the amount of work ahead of you.
>>>>>
>>>>> /Magnus
>>>>> Is produced.
>>>>>
>>>>> Then I can again issue
>>>>> make JOBS=1 LOG=debug
>>>>>
>>>>> And the compile process is being continued, until a similar error pops
>>>>> up with a different generated file. I have an assumption that this happens
>>>>> because make is still running parallel jobs, despite JOBS=1 but I’m not
>>>>> sure.
>>>>>
>>>>> How could I best tackle this?
>>>>>
>>>>> Thank you and best regards,
>>>>>
>>>>> Peter
>>>>>
>>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>>>>> Windows 10
>>>>>
>>>>> From: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>>>>> Sent: Thursday, October 5, 2017 11:33 AM
>>>>> To: Erik Joelsson<mailto:erik.joelsson at oracle.com<mailto:erik.joelsson at oracle.com>>; Peter
>>>>> Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>; build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mai
>>>>> lto:build-dev at openjdk.java.net<mailto:lto%3Abuild-dev at openjdk.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>
>>>>> On 2017-10-05 10:10, Erik Joelsson wrote:
>>>>>
>>>>>> Hello Peter,
>>>>>>
>>>>>>
>>>>>> On 2017-10-04 21:15, Peter Budai wrote:
>>>>>>
>>>>>>> Hi Magnus,
>>>>>>>
>>>>>>> Thanks for the quick reply I’ll check these patches with msys2.
>>>>>>>
>>>>>>> Let me specify with more details what I’d like to achieve: I’d like
>>>>>>> to build OpenJDK9 with MSYS2 MINGW64 environment using gcc toolchain.
>>>>>>> (I’m not sure how familiar are you with MSYS2, but there are 3
>>>>>>> different environments: MSYS2, MINGW32 and MINGW64). In theory
>>>>>>> MINGW64 with gcc is the closes you can get on Windows platform as a
>>>>>>> gcc unix like build environment, which produces still a native 64-bit
>>>>>>> executable on Windows.
>>>>>>>
>>>>>>> I’m not very familiar with OpenJDK yet, so therefore I’d like to hear
>>>>>>> your opinion: how realistic is that?
>>>>>>>
>>>>>> Sorry to disappoint, but I would say that requires major work. There
>>>>>> is a strong historic assumption that windows builds are done using
>>>>>> Visual Studio. We have abstracted away some of it in configure (see
>>>>>> TOOLCHAIN_TYPE), but it's very far from enough to change compiler
>>>>>> environment for a Windows build. The native sources are also bound to
>>>>>> make a lot of such assumptions. I would expect the changes needed to
>>>>>> be in the thousands of lines of code.
>>>>>>
>>>>> I agree that it requires hard work (even if "thousands" might be an
>>>>> overestimation I think, but "hundreds" is not enough, so it's the right
>>>>> magnitude). On the other hand, it would be really good if we did sort
>>>>> things out, so that we had proper conditions based on OS vs
>>>>> compiler/toolchain.
>>>>>
>>>>> If you really want to start, the first thing is to patch toolchain.m4
>>>>> to
>>>>> VALID_TOOLCHAINS_windows="microsoft gcc"
>>>>> and then call configure using "bash configure
>>>>> --with-toolchain-type=gcc".
>>>>>
>>>>> As Erik, I doubt you will come very far before things starts tumbling
>>>>> down.
>>>>>
>>>>> When we say supporting the build in msys2 instead of cygwin, we just
>>>>>> mean using msys2 as the unix emulating layer for our tools like
>>>>>> make/bash/grep/sed etc.
>>>>>>
>>>>>> One think I have done successfully is running the build in WSL
>>>>>> (Windows Subsystem for Linux), but that isn't all that helpful as WSL
>>>>>> for practical purposes is more or less like running Linux in a VM, so
>>>>>> the build sees a Linux system and builds a Linux binary.
>>>>>>
>>>>>>> As a side note: with MINGW64 I have managed to run configure phase
>>>>>>> successfully for OpenJDK. The compile process has also started and
>>>>>>> went for a while, but interestingly I run into some kind of race
>>>>>>> conditions as make stopped with an error. Using LOG=debug I have fond
>>>>>>> the failing line and then copying the failed command and pasting it
>>>>>>> to the bash prompt it successfully generated the output target, and
>>>>>>> then the build process run further when a similar situation happened.
>>>>>>> Also pasting the failed command run in the bash without any problem,
>>>>>>> and build continued… until the next.
>>>>>>>
>>>>>> Without seeing the errors I can't say much. I very much doubt that you
>>>>>> are running with gcc as the compiler though. Configure isn't easily
>>>>>> fooled into using a different compiler to what it prefers, and I would
>>>>>> expect things to crash and burn pretty early if you actually did.
>>>>>>
>>>>>> /Erik
>>>>>>
>>>>>>> I have tried to run make JOBS=1, but did not help, strangely I have
>>>>>>> still seen in the log make[3] and make[4] logs which suggested that
>>>>>>> there are more than one make jobs were running. Also tried .configure
>>>>>>> --with-output-sync=recurse without success (same symptoms)
>>>>>>>
>>>>>>> Let me know your thoughts.
>>>>>>>
>>>>>>> Best regards,
>>>>>>>
>>>>>>> Peter
>>>>>>>
>>>>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>>>>>>> Windows 10
>>>>>>>
>>>>>>> From: Magnus Ihse Bursie<mailto:magnus.ihse.bursie at oracle.com<mailto:magnus.ihse.bursie at oracle.com>>
>>>>>>> Sent: Wednesday, October 4, 2017 1:04 AM
>>>>>>> To: Peter Budai<mailto:peterbudai at hotmail.com<mailto:peterbudai at hotmail.com>>;
>>>>>>> build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>
>>>>>>> ><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>><mailto:build-dev at openjd<mailto:build-dev at openjd>
>>>>>>> k.java.net<http://k.java.net>><mailto:build-dev at openjdk.java.net<mailto:build-dev at openjdk.java.net>>
>>>>>>> Subject: Re: Building OpenJDK9 on MSYS2
>>>>>>>
>>>>>>> Actually, it wasn't so much remaining trouble. :-) I fired up msys2
>>>>>>> and
>>>>>>> checked out where I left off. It turned out that the remaining snag
>>>>>>> was
>>>>>>> that msys2 tries to convert command lines automatically, from "unix"
>>>>>>> style paths to "windows" style paths. Unfortunately, it does not do
>>>>>>> this
>>>>>>> very well and it breaks all sorts of things. We already have a
>>>>>>> FIXPATH
>>>>>>> solution in place which deals with this, so basically all I had to do
>>>>>>> was disable this (by setting MSYS2_ARG_CONV_EXCL to "*"). However,
>>>>>>> this
>>>>>>> broke our cygpath replacement hack (!) so I had to disable it there.
>>>>>>> Sigh. Anyway, with those fixes it ran and worked well. (I also
>>>>>>> discovered and fixed a bug related to how we set up the FIXPATH
>>>>>>> variable
>>>>>>> on msys, but it only triggers in certain circumstances).
>>>>>>>
>>>>>>> With this patch I now jdk9 seems to build fine on msys2. It should
>>>>>>> apply
>>>>>>> cleanly on jdk9/jdk9. Since it turned out to be so trivial, I'll try
>>>>>>> to
>>>>>>> get it in in jdk10.
>>>>>>>
>>>>>>> Here's the patch if you want to apply it yourself:
>>>>>>>
>>>>>>> diff -r a08cbfc0e4ec common/autoconf/basics_windows.m4
>>>>>>> --- a/common/autoconf/basics_windows.m4 Thu Aug 03 18:56:56 2017
>>>>>>> +0000
>>>>>>> +++ b/common/autoconf/basics_windows.m4 Wed Oct 04 00:53:58 2017
>>>>>>> +0200
>>>>>>> @@ -42,7 +42,7 @@
>>>>>>> windows_path=`$CYGPATH -m "$unix_path"`
>>>>>>> $1="$windows_path"
>>>>>>> elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
>>>>>>> - windows_path=`cmd //c echo $unix_path`
>>>>>>> + windows_path=`MSYS2_ARG_CONV_EXCL= cmd //c echo $unix_path`
>>>>>>> $1="$windows_path"
>>>>>>> fi
>>>>>>> ])
>>>>>>> @@ -136,6 +136,16 @@
>>>>>>> fi
>>>>>>> ])
>>>>>>>
>>>>>>> +AC_DEFUN([BASIC_MSYS_UPDATE_FIXPATH],
>>>>>>> +[
>>>>>>> + # Take all collected prefixes and turn them into a
>>>>>>> -m/c/foo@/c/bar at ... command line
>>>>>>> + # @ was chosen as separator to minimize risk of other tools
>>>>>>> messing
>>>>>>> around with it
>>>>>>> + all_unique_prefixes=`echo "${all_fixpath_prefixes@<:@@@:>@}" \
>>>>>>> + | tr ' ' '\n' | $GREP '^/./' | $SORT | $UNIQ`
>>>>>>> + fixpath_argument_list=`echo $all_unique_prefixes | tr ' ' '@'`
>>>>>>> + FIXPATH="$FIXPATH_BIN -m$fixpath_argument_list"
>>>>>>> +])
>>>>>>> +
>>>>>>> AC_DEFUN([BASIC_FIXUP_PATH_MSYS],
>>>>>>> [
>>>>>>> path="[$]$1"
>>>>>>> @@ -143,7 +153,7 @@
>>>>>>> new_path="$path"
>>>>>>> if test "x$has_colon" = x; then
>>>>>>> # Not in mixed or Windows style, start by that.
>>>>>>> - new_path=`cmd //c echo $path`
>>>>>>> + new_path=`MSYS2_ARG_CONV_EXCL= cmd //c echo $path`
>>>>>>> fi
>>>>>>>
>>>>>>> BASIC_MAKE_WINDOWS_SPACE_SAFE_MSYS([$new_path])
>>>>>>> @@ -155,6 +165,8 @@
>>>>>>>
>>>>>>> # Save the first 10 bytes of this path to the storage, so
>>>>>>> fixpath
>>>>>>> can work.
>>>>>>> all_fixpath_prefixes=("${all_fixpath_prefixes@<:@@@:>@}"
>>>>>>> "${new_path:0:10}")
>>>>>>> + # We might need to re-evaluate FIXPATH.
>>>>>>> + BASIC_MSYS_UPDATE_FIXPATH
>>>>>>> ])
>>>>>>>
>>>>>>> AC_DEFUN([BASIC_FIXUP_EXECUTABLE_CYGWIN],
>>>>>>> @@ -293,7 +305,7 @@
>>>>>>> # Do not save /bin paths to all_fixpath_prefixes!
>>>>>>> else
>>>>>>> # Not in mixed or Windows style, start by that.
>>>>>>> - new_path=`cmd //c echo $new_path`
>>>>>>> + new_path=`MSYS2_ARG_CONV_EXCL= cmd //c echo $new_path`
>>>>>>> BASIC_MAKE_WINDOWS_SPACE_SAFE_MSYS([$new_path])
>>>>>>> # Output is in $new_path
>>>>>>> BASIC_WINDOWS_REWRITE_AS_UNIX_PATH(new_path)
>>>>>>> @@ -302,6 +314,8 @@
>>>>>>>
>>>>>>> # Save the first 10 bytes of this path to the storage, so
>>>>>>> fixpath
>>>>>>> can work.
>>>>>>> all_fixpath_prefixes=("${all_fixpath_prefixes@<:@@@:>@}"
>>>>>>> "${new_path:0:10}")
>>>>>>> + # We might need to re-evaluate FIXPATH.
>>>>>>> + BASIC_MSYS_UPDATE_FIXPATH
>>>>>>> fi
>>>>>>> ])
>>>>>>>
>>>>>>> @@ -347,6 +361,10 @@
>>>>>>> WINDOWS_ENV_VENDOR='msys'
>>>>>>> WINDOWS_ENV_VERSION="$MSYS_VERSION"
>>>>>>>
>>>>>>> + # Prohibit msys2 path conversion from trying to be
>>>>>>> "intelligent",
>>>>>>> and rely
>>>>>>> + # on fixpath instead.
>>>>>>> + export MSYS2_ARG_CONV_EXCL="*"
>>>>>>> +
>>>>>>> AC_MSG_CHECKING([msys root directory as unix-style path])
>>>>>>> # The cmd output ends with Windows line endings (CR/LF),
>>>>>>> the grep
>>>>>>> command will strip that away
>>>>>>> MSYS_ROOT_PATH=`cd / ; cmd /c cd | $GREP ".*"`
>>>>>>> @@ -391,10 +409,7 @@
>>>>>>> elif test "x$OPENJDK_BUILD_OS_ENV" = xwindows.msys; then
>>>>>>> # Take all collected prefixes and turn them into a
>>>>>>> -m/c/foo@/c/bar at ... command line
>>>>>>> # @ was chosen as separator to minimize risk of other
>>>>>>> tools
>>>>>>> messing around with it
>>>>>>> - all_unique_prefixes=`echo "${all_fixpath_prefixes@<:@@@:>@}"
>>>>>>> \
>>>>>>> - | tr ' ' '\n' | $GREP '^/./' | $SORT | $UNIQ`
>>>>>>> - fixpath_argument_list=`echo $all_unique_prefixes | tr ' '
>>>>>>> '@'`
>>>>>>> - FIXPATH="$FIXPATH_BIN -m$fixpath_argument_list"
>>>>>>> + BASIC_MSYS_UPDATE_FIXPATH
>>>>>>> fi
>>>>>>> FIXPATH_SRC_W="$FIXPATH_SRC"
>>>>>>> FIXPATH_BIN_W="$FIXPATH_BIN"
>>>>>>> diff -r a08cbfc0e4ec common/autoconf/build-aux/config.sub
>>>>>>> --- a/common/autoconf/build-aux/config.sub Thu Aug 03 18:56:56
>>>>>>> 2017 +0000
>>>>>>> +++ b/common/autoconf/build-aux/config.sub Wed Oct 04 00:53:58
>>>>>>> 2017 +0200
>>>>>>> @@ -30,7 +30,7 @@
>>>>>>> DIR=`dirname $0`
>>>>>>>
>>>>>>> # First, filter out everything that doesn't begin with
>>>>>>> "aarch64-"
>>>>>>> -if ! echo $* | grep '^aarch64-' >/dev/null ; then
>>>>>>> +if ! echo $* | grep -e '^aarch64-' -e 'msys' >/dev/null ; then
>>>>>>> . $DIR/autoconf-config.sub "$@"
>>>>>>> # autoconf-config.sub exits, so we never reach here, but
>>>>>>> just in
>>>>>>> # case we do:
>>>>>>> @@ -38,13 +38,17 @@
>>>>>>> fi
>>>>>>>
>>>>>>> while test $# -gt 0 ; do
>>>>>>> - case $1 in
>>>>>>> + case $1 in
>>>>>>> -- ) # Stop option processing
>>>>>>> shift; break ;;
>>>>>>> aarch64-* )
>>>>>>> config=`echo $1 | sed 's/^aarch64-/arm-/'`
>>>>>>> sub_args="$sub_args $config"
>>>>>>> shift; ;;
>>>>>>> + *-msys )
>>>>>>> + config=`echo $1 | sed 's/msys/mingw32/'`
>>>>>>> + sub_args="$sub_args $config"
>>>>>>> + shift; ;;
>>>>>>> - ) # Use stdin as input.
>>>>>>> sub_args="$sub_args $1"
>>>>>>> shift; break ;;
>>>>>>> diff -r a08cbfc0e4ec common/autoconf/spec.gmk.in<http://spec.gmk.in>
>>>>>>> --- a/common/autoconf/spec.gmk.in<http://spec.gmk.in> Thu Aug 03 18:56:56 2017 +0000
>>>>>>> +++ b/common/autoconf/spec.gmk.in<http://spec.gmk.in> Wed Oct 04 00:53:58 2017 +0200
>>>>>>> @@ -120,6 +120,13 @@
>>>>>>> # On Windows, the Visual Studio toolchain needs the PATH to be
>>>>>>> adjusted
>>>>>>> # to include Visual Studio tools (this needs to be in
>>>>>>> cygwin/msys
>>>>>>> style).
>>>>>>> export PATH:=@VS_PATH@
>>>>>>> +
>>>>>>> +endif
>>>>>>> +
>>>>>>> +ifeq ($(OPENJDK_TARGET_OS_ENV), windows.msys)
>>>>>>> + # On msys2, prohibit msys path conversion from trying to be
>>>>>>> + # "intelligent", and rely on fixpath instead.
>>>>>>> + export MSYS2_ARG_CONV_EXCL:=*
>>>>>>> endif
>>>>>>>
>>>>>>> SYSROOT_CFLAGS := @SYSROOT_CFLAGS@
>>>>>>>
>>>>>>> /Magnus
>>>>>>>
>>>>>>> On 2017-10-03 22:34, Magnus Ihse Bursie wrote:
>>>>>>>
>>>>>>>> I gave msys2 a shot some time ago, but it ended up too much trouble.
>>>>>>>> I'll share some of my notes from that attempt, for what it's worth.
>>>>>>>>
>>>>>>>> To install package X/Y, run "pacman -S X/Y". Missing tools and
>>>>>>>> packages where to find them:
>>>>>>>> cmp: msys/diffutils
>>>>>>>> tar: msys/tar
>>>>>>>> make: msys/make
>>>>>>>> unzip: msys/unzip
>>>>>>>> zip: msys/zip
>>>>>>>>
>>>>>>>> config.sub reports msys as "x86_64-pc-mingw32" but msys2 as
>>>>>>>> "x86_64-pc-msys". This patch adds postprocessing in "our" config.sub
>>>>>>>> to report msys2 similar to msys. (Opinions, including my own :-) may
>>>>>>>> vary if this really is the best way..)
>>>>>>>>
>>>>>>>> diff -r b88023f46daa common/autoconf/build-aux/config.sub
>>>>>>>> --- a/common/autoconf/build-aux/config.sub Fri Jan 27 10:15:41
>>>>>>>> 2017 +0100
>>>>>>>> +++ b/common/autoconf/build-aux/config.sub Fri Feb 03 05:00:25
>>>>>>>> 2017 -0700
>>>>>>>> @@ -30,7 +30,7 @@
>>>>>>>> DIR=`dirname $0`
>>>>>>>>
>>>>>>>> # First, filter out everything that doesn't begin with
>>>>>>>> "aarch64-"
>>>>>>>> -if ! echo $* | grep '^aarch64-' >/dev/null ; then
>>>>>>>> +if ! echo $* | grep -e '^aarch64-' -e 'msys' >/dev/null ; then
>>>>>>>> . $DIR/autoconf-config.sub "$@"
>>>>>>>> # autoconf-config.sub exits, so we never reach here, but
>>>>>>>> just in
>>>>>>>> # case we do:
>>>>>>>> @@ -45,6 +45,10 @@
>>>>>>>> config=`echo $1 | sed 's/^aarch64-/arm-/'`
>>>>>>>> sub_args="$sub_args $config"
>>>>>>>> shift; ;;
>>>>>>>> + *-msys )
>>>>>>>> + config=`echo $1 | sed 's/msys/mingw32/'`
>>>>>>>> + sub_args="$sub_args $config"
>>>>>>>> + shift; ;;
>>>>>>>> - ) # Use stdin as input.
>>>>>>>> sub_args="$sub_args $1"
>>>>>>>> shift; break ;;
>>>>>>>>
>>>>>>>> If I remember correctly, this got me past the configure stage at the
>>>>>>>> time.
>>>>>>>>
>>>>>>>> I don't think it's very hard to get it to work on msys2, I just ran
>>>>>>>> into one snag too many and didn't think msys2 would be used by
>>>>>>>> anyone.
>>>>>>>>
>>>>>>>> /Magnus
>>>>>>>>
>>>>>>>> On 2017-10-03 17:20, Peter Budai wrote:
>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> According to
>>>>>>>>> http://hg.openjdk.java.net/jdk9/jdk9/file/a08cbfc0e4ec/commo
>>>>>>>>> n/doc/building.html
>>>>>>>>>
>>>>>>>>> “msys2 and the new Windows Subsystem for Linux (WSL) would likely
>>>>>>>>> be
>>>>>>>>> possible to support in a future version but that would require a
>>>>>>>>> community effort to implement”
>>>>>>>>>
>>>>>>>>> I’d like to help making the OpenJDK 9 build working on msys2. What
>>>>>>>>> is
>>>>>>>>> the best way to move forward? Is there a similar effort in
>>>>>>>>> progress?
>>>>>>>>>
>>>>>>>>> Thank you and best regards,
>>>>>>>>>
>>>>>>>>> Peter
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>>
>
More information about the build-dev
mailing list