RFR(S): 8058345: Refactor native stack printing from vmError.cpp to debug.cpp to make it available in gdb as well

Volker Simonis volker.simonis at gmail.com
Mon Sep 22 09:31:54 UTC 2014


On Sat, Sep 20, 2014 at 12:22 AM, Vladimir Kozlov
<vladimir.kozlov at oracle.com> wrote:
> os_solaris_sparc.cpp
>
> I think third parameter should be 'false' - originally we passed 0:
>
> -    return frame(NULL, NULL, NULL);
> +    return frame(NULL, NULL, true);
>

Sorry, my fault. Fixed.

> Please, use one line (even if it is long):
>
> +  tty->print_cr("  pns(void* sp,\n"
> +                "      void* fp,\n"
> +                "      void* pc)  - print native (i.e. mixed) stack trace.
> E.g.");
>

Done.

> Otherwise look good.

Thanks. Here's the new webrev:

http://cr.openjdk.java.net/~simonis/webrevs/8058345.v3

Regards,
Volker

>
> Thanks,
> Vladimir
>
>
> On 9/19/14 11:55 AM, Volker Simonis wrote:
>>
>> Hi,
>>
>> so here's my new version:
>>
>>   - documented the "pns" command with examples
>>   - removed the clumsy "make_frame" generators and introduced a genreic
>> frame constructor on all platforms which can now be called from pns()
>>   - pns() must now be called with three arguments (usually registers
>> like pns($sp, $fp, $pc) but some arguments may be '0' on some
>> platforms (see the examples in the documentation of pns())
>>   - tested on Linux (x86, x64, ppc64) and Solaris (SPARC, x64)
>>   - added additional "Summary" section to the change which mentions
>> that the change also fixes stack traces on x86 to enable walking of
>> runtime stubs and native wrappers.
>>
>> http://cr.openjdk.java.net/~simonis/webrevs/8058345.v2/
>>
>> Notice that the current version requires trivial changes in your
>> closed ports (i.e. adding the generic frame constructor) but I'd need
>> a sponsor anyway:)
>>
>> Regards,
>> Volker
>>
>> On Wed, Sep 17, 2014 at 9:49 PM, Vladimir Kozlov
>> <vladimir.kozlov at oracle.com> wrote:
>>>
>>> On 9/17/14 11:29 AM, Volker Simonis wrote:
>>>>
>>>>
>>>> On Wed, Sep 17, 2014 at 12:10 AM, Vladimir Kozlov
>>>> <vladimir.kozlov at oracle.com> wrote:
>>>>>
>>>>>
>>>>> On 9/16/14 12:21 PM, Volker Simonis wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Vladimir,
>>>>>>
>>>>>> thanks for looking at the change.
>>>>>>
>>>>>> 'make_frame' is only intended to be used from within the debugger to
>>>>>> simplify the usage of the new 'pns()' (i.e. "print native stack")
>>>>>> helper. It can be used as follows:
>>>>>>
>>>>>> (gdb) call pns(make_frame($sp, $rbp, $pc))
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> It is strange way to use pns(). Why not pass (sp, fp, pc) to pns() and
>>>>> let
>>>>> it call make_frame()? To have make_frame() only on ppc and x86 will not
>>>>> allow to use pns() on other platforms.
>>>>>
>>>>> Would be nice to have pns() version (names different) without input
>>>>> parameters. Can we use os::current_frame() inside for that?
>>>>>
>>>>> Add pns() description to help() output.
>>>>>
>>>>>>
>>>>>> "Executing pns"
>>>>>> Native frames: (J=compiled Java code, j=interpreted, Vv=VM code,
>>>>>> C=native
>>>>>> code)
>>>>>> C  [libpthread.so.0+0xc0fe]  pthread_cond_timedwait+0x13e
>>>>>> V  [libjvm.so+0x96c4c1]  os::sleep(Thread*, long, bool)+0x1a1
>>>>>> V  [libjvm.so+0x75f442]  JVM_Sleep+0x312
>>>>>> j  java.lang.Thread.sleep(J)V+0
>>>>>> j  CrashNative.crashIt(Lsun/misc/Unsafe;I)V+10
>>>>>> j  CrashNative.doIt()V+45
>>>>>> v  ~StubRoutines::call_stub
>>>>>> V  [libjvm.so+0x71599f]
>>>>>> JavaCalls::call_helper(JavaValue*,methodHandle*, JavaCallArguments*,
>>>>>> Thread*)+0xf8f
>>>>>>
>>>>>> What about the two fixesin in 'print_native_stack()' - do you think
>>>>>> they
>>>>>> are OK?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> What about is_runtime_frame()? It is wrapper for runtime calls from
>>>>> compiled
>>>>> code.
>>>>>
>>>>
>>>> Yes, but I don't see how this could help here, because the native
>>>> wrapper which makes problems here is a nmethod and not a runtime stub.
>>>>
>>>> Maybe you mean to additionally add is_runtime_frame() to the check?
>>>
>>>
>>>
>>> Yes, that is what I meant.
>>>
>>> Thanks,
>>> Vladimir
>>>
>>>
>>>> Yes, I've just realized that that's indeed needed on amd64 to walk
>>>> runtime stubs. SPARC is more graceful and works without these changes,
>>>> but on amd64 we need them (on both Solaris and Linux) and on Sparc
>>>> they don't hurt.
>>>>
>>>> I've written a small test program which should be similar to the one
>>>> you used for 8035983:
>>>>
>>>> import java.util.Hashtable;
>>>>
>>>> public class StackTraceTest {
>>>>     static Hashtable ht;
>>>>     static {
>>>>       ht = new Hashtable();
>>>>       ht.put("one", "one");
>>>>     }
>>>>
>>>>     public static void foo() {
>>>>       bar();
>>>>     }
>>>>
>>>>     public static void bar() {
>>>>       ht.get("one");
>>>>     }
>>>>
>>>>     public static void main(String args[]) {
>>>>       for (int i = 0; i < 5; i++) {
>>>>         new Thread() {
>>>>           public void run() {
>>>>             while(true) {
>>>>               foo();
>>>>             }
>>>>           }
>>>>         }.start();
>>>>       }
>>>>     }
>>>> }
>>>>
>>>> If I run it with "-XX:-Inline -XX:+PrintCompilation
>>>> -XX:-TieredCompilation StackTraceTest" inside the debugger and crash
>>>> one of the Java threads in native code, I get the correct stack traces
>>>> on SPARC. But on amd64, I only get the following without my changes:
>>>>
>>>> Stack: [0xfffffd7da16f9000,0xfffffd7da17f9000],
>>>> sp=0xfffffd7da17f7c60,  free space=1019k
>>>> Native frames: (J=compiled Java code, j=interpreted, Vv=VM code,
>>>> C=native
>>>> code)
>>>> C  [libc.so.1+0xc207f]  _lwp_cond_wait+0x1f
>>>> V  [libjvm.so+0x171443b]  int
>>>> os::Solaris::cond_wait(_lwp_cond*,_lwp_mutex*)+0x2b
>>>> V  [libjvm.so+0x171181a]  void os::PlatformEvent::park()+0x1fa
>>>> V  [libjvm.so+0x16e09c1]  void ObjectMonitor::EnterI(Thread*)+0x6f1
>>>> V  [libjvm.so+0x16dfc8f]  void ObjectMonitor::enter(Thread*)+0x7cf
>>>> V  [libjvm.so+0x18cdd00]  void
>>>> ObjectSynchronizer::slow_enter(Handle,BasicLock*,Thread*)+0x2a0
>>>> V  [libjvm.so+0x18cd6a7]  void
>>>> ObjectSynchronizer::fast_enter(Handle,BasicLock*,bool,Thread*)+0x157
>>>> V  [libjvm.so+0x182f39e]  void
>>>>
>>>>
>>>> SharedRuntime::complete_monitor_locking_C(oopDesc*,BasicLock*,JavaThread*)+0x23e
>>>> v  ~RuntimeStub::_complete_monitor_locking_Java
>>>> C  0x2aad1dd1000016d8
>>>>
>>>> With the changes (and the additional check for is_runtime_frame()) I
>>>> get full stack traces on amd64 as well. So I think the changes should
>>>> be at least an improvement:)
>>>
>>>
>>>
>>> Good!
>>>
>>>
>>>>
>>>>> You need to check what fr.real_fp() returns on all platforms for the
>>>>> very
>>>>> first frame (_lwp_start). That is what this check about - stop walking
>>>>> when
>>>>> it reaches the first frame. fr.sender_sp() returns bogus value which is
>>>>> not
>>>>> stack pointer for the first frame. From 8035983 review:
>>>>>
>>>>> "It seems using fr.sender_sp() in the check work on x86 and sparc.
>>>>> On x86 it return stack_base value on sparc it returns STACK_BIAS."
>>>>>
>>>>> Also on other our platforms it could return 0 or small integer value.
>>>>>
>>>>> If you can suggest an other way to determine the first frame, please,
>>>>> tell.
>>>>>
>>>>
>>>> So the initial problem in 8035983 was that we used
>>>> os::is_first_C_frame(&fr) for native frames where the sender was a
>>>> compiled frame. That didn't work reliably because,
>>>> os::is_first_C_frame(&fr) uses fr->link() to get the frame pointer of
>>>> the sender and that doesn't work for compiled senders.
>>>>
>>>> So you replaced os::is_first_C_frame(&fr) by
>>>> !on_local_stack((address)(fr.sender_sp() + 1)) but that uses addr_at()
>>>> internally which in turn uses fp() so it won't work for frames which
>>>> have a bogus frame pointer like native wrappers.
>>>>
>>>> I think using fr.real_fp() should be safe because as far as I can see
>>>> it is always fr.sender_sp() - 2 on amd64 and equal to fr.sender_sp()
>>>> on SPARC. On Linux/amd64 both, the sp and fp of the first frame will
>>>> be 0 (still have to check on SPARC). But the example above works fine
>>>> with my changes on both, Linux/amd64 and Solaris/SPARC and
>>>> Solaris/amd64.
>>>>
>>>> I'll prepare a new webrev tomorrow which will have the documentation
>>>> for "pns" and a version of make_frame() for SPARC.
>>>>
>>>> Regards,
>>>> Volker
>>>>
>>>>>> Should I move 'print_native_stack()' to vmError.cpp as suggested by
>>>>>> David?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I am fine with both places.
>>>>>
>>>>> Thanks,
>>>>> Vladimir
>>>>>
>>>>>
>>>>>>
>>>>>> Thank you and best regards,
>>>>>> Volker
>>>>>>
>>>>>> On Tue, Sep 16, 2014 at 8:11 PM, Vladimir Kozlov
>>>>>> <vladimir.kozlov at oracle.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thank you for fixing frame walk.
>>>>>>> I don't see where make_frame() is used.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Vladimir
>>>>>>>
>>>>>>>
>>>>>>> On 9/16/14 9:35 AM, Volker Simonis wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> while testing my change, I found two other small problems with
>>>>>>>> native
>>>>>>>> stack traces:
>>>>>>>>
>>>>>>>> 1. we can not walk native wrappers on (at least not on Linux/amd64)
>>>>>>>> because they are treated as native "C" frames. However, if the
>>>>>>>> native
>>>>>>>> wrapper was called from a compiled frame which had no valid frame
>>>>>>>> pointer (i.e. %rbp) os::get_sender_for_C_frame(&fr) will produce a
>>>>>>>> bad
>>>>>>>> frame. This can be easily fixed by treating native wrappers like
>>>>>>>> java
>>>>>>>> frames.
>>>>>>>>
>>>>>>>> 2. the fix for "8035983: Fix "Native frames:" in crash report
>>>>>>>> (hs_err
>>>>>>>> file)" introduced a similar problem. If we walk tha stack from a
>>>>>>>> native wrapper down to a compiled frame, we will have a frame with
>>>>>>>> an
>>>>>>>> invalid frame pointer. In that case, the newly introduced check from
>>>>>>>> change 8035983 will fail, because fr.sender_sp() depends on a valid
>>>>>>>> fp. I'll propose to replace fr.sender_sp() by fr.real_fp() which
>>>>>>>> should do the same but also works for compiled frames with invalid
>>>>>>>> fp.
>>>>>>>>
>>>>>>>> Here's the new webrev:
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~simonis/webrevs/8058345.v1/
>>>>>>>>
>>>>>>>> What dou you think?
>>>>>>>>
>>>>>>>> Thank you and best regards,
>>>>>>>> Volker
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 16, 2014 at 3:48 PM, Volker Simonis
>>>>>>>> <volker.simonis at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 'print_native_stack()' must be visible in both vmError.cpp and
>>>>>>>>> debug.cpp. Initially I saw that vmError.cpp already included
>>>>>>>>> debug.hpp
>>>>>>>>> so I decided to declare it in debug.hpp. But now I realized that
>>>>>>>>> also
>>>>>>>>> debug.cpp includes vmError.hpp so I could just as well declare
>>>>>>>>> 'print_native_stack()' in vmError.hpp and leave the implementation
>>>>>>>>> in
>>>>>>>>> vmError.cpp. Do you want me to change that?
>>>>>>>>>
>>>>>>>>> Thank you and best regards,
>>>>>>>>> Volker
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 16, 2014 at 8:51 AM, David Holmes
>>>>>>>>> <david.holmes at oracle.com>
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi Volker,
>>>>>>>>>>
>>>>>>>>>> On 13/09/2014 5:15 AM, Volker Simonis wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> could you please review and sponsor the following small change
>>>>>>>>>>> which
>>>>>>>>>>> should make debugging a little more comfortabel (at least on
>>>>>>>>>>> Linux
>>>>>>>>>>> for
>>>>>>>>>>> now):
>>>>>>>>>>>
>>>>>>>>>>> http://cr.openjdk.java.net/~simonis/webrevs/8058345/
>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8058345
>>>>>>>>>>>
>>>>>>>>>>> In the hs_err files we have a nice mixed stack trace which
>>>>>>>>>>> contains
>>>>>>>>>>> both, Java and native frames.
>>>>>>>>>>> It would be nice if we could make this functionality available
>>>>>>>>>>> from
>>>>>>>>>>> within gdb during debugging sessions (until now we can only print
>>>>>>>>>>> the
>>>>>>>>>>> pure Java stack with the "ps()" helper function from debug.cpp).
>>>>>>>>>>>
>>>>>>>>>>> This new feature can be easily achieved by refactoring the
>>>>>>>>>>> corresponding stack printing code from VMError::report() in
>>>>>>>>>>> vmError.cpp into its own method in debug.cpp. This change
>>>>>>>>>>> extracts
>>>>>>>>>>> that code into the new function 'print_native_stack()' in
>>>>>>>>>>> debug.cpp
>>>>>>>>>>> without changing anything of the functionality.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Why does it need to move to debug.cpp to allow this ?
>>>>>>>>>>
>>>>>>>>>> David
>>>>>>>>>> -----
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> It also adds some helper functions which make it easy to call the
>>>>>>>>>>> new
>>>>>>>>>>> 'print_native_stack()' method from within gdb. There's the new
>>>>>>>>>>> helper
>>>>>>>>>>> function 'pns(frame f)'  which takes a frame argument and calls
>>>>>>>>>>> 'print_native_stack()'. We need the frame argument because gdb
>>>>>>>>>>> inserts
>>>>>>>>>>> a dummy frame for every call and we can't easily walk over this
>>>>>>>>>>> dummy
>>>>>>>>>>> frame from our stack printing routine.
>>>>>>>>>>>
>>>>>>>>>>> To simplify the creation of the frame object, I've added the
>>>>>>>>>>> helper
>>>>>>>>>>> functions:
>>>>>>>>>>>
>>>>>>>>>>> extern "C" frame make_frame(intptr_t* sp, intptr_t* fp, address
>>>>>>>>>>> pc)
>>>>>>>>>>> {
>>>>>>>>>>>        return frame(sp, fp, pc);
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>> for x86 (in frame_x86.cpp) and
>>>>>>>>>>>
>>>>>>>>>>> extern "C" frame make_frame(intptr_t* sp, address pc) {
>>>>>>>>>>>        return frame(sp, pc);
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>> for ppc64 in frame_ppc.cpp. With these helper functions we can
>>>>>>>>>>> now
>>>>>>>>>>> easily get a mixed stack trace of a Java thread in gdb (see
>>>>>>>>>>> below).
>>>>>>>>>>>
>>>>>>>>>>> All the helper functions are protected by '#ifndef PRODUCT'
>>>>>>>>>>>
>>>>>>>>>>> Thank you and best regards,
>>>>>>>>>>> Volker
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> (gdb) call pns(make_frame($sp, $rbp, $pc))
>>>>>>>>>>>
>>>>>>>>>>> "Executing pns"
>>>>>>>>>>> Native frames: (J=compiled Java code, j=interpreted, Vv=VM code,
>>>>>>>>>>> C=native
>>>>>>>>>>> code)
>>>>>>>>>>> C  [libpthread.so.0+0xc0fe]  pthread_cond_timedwait+0x13e
>>>>>>>>>>> V  [libjvm.so+0x96c4c1]  os::sleep(Thread*, long, bool)+0x1a1
>>>>>>>>>>> V  [libjvm.so+0x75f442]  JVM_Sleep+0x312
>>>>>>>>>>> j  java.lang.Thread.sleep(J)V+0
>>>>>>>>>>> j  CrashNative.crashIt(Lsun/misc/Unsafe;I)V+10
>>>>>>>>>>> j  CrashNative.doIt()V+45
>>>>>>>>>>> v  ~StubRoutines::call_stub
>>>>>>>>>>> V  [libjvm.so+0x71599f]  JavaCalls::call_helper(JavaValue*,
>>>>>>>>>>> methodHandle*, JavaCallArguments*, Thread*)+0xf8f
>>>>>>>>>>> V  [libjvm.so+0x9eab75]  Reflection::invoke(instanceKlassHandle,
>>>>>>>>>>> methodHandle, Handle, bool, objArrayHandle, BasicType,
>>>>>>>>>>> objArrayHandle,
>>>>>>>>>>> bool, Thread*) [clone .constprop.218]+0xa25
>>>>>>>>>>> V  [libjvm.so+0x9eb838]  Reflection::invoke_method(oopDesc*,
>>>>>>>>>>> Handle,
>>>>>>>>>>> objArrayHandle, Thread*)+0x1c8
>>>>>>>>>>> V  [libjvm.so+0x7637ae]  JVM_InvokeMethod+0xfe
>>>>>>>>>>> j
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
>>>>>>>>>>> j
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+100
>>>>>>>>>>> j
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
>>>>>>>>>>> j
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+56
>>>>>>>>>>> j  CrashNative.mainJava()V+32
>>>>>>>>>>> v  ~StubRoutines::call_stub
>>>>>>>>>>> V  [libjvm.so+0x71599f]  JavaCalls::call_helper(JavaValue*,
>>>>>>>>>>> methodHandle*, JavaCallArguments*, Thread*)+0xf8f
>>>>>>>>>>> V  [libjvm.so+0x7384f5]  jni_invoke_static(JNIEnv_*, JavaValue*,
>>>>>>>>>>> _jobject*, JNICallType, _jmethodID*, JNI_ArgumentPusher*,
>>>>>>>>>>> Thread*)
>>>>>>>>>>> [clone .isra.238] [clone .constprop.250]+0x385
>>>>>>>>>>> V  [libjvm.so+0x73b3d7]  jni_CallStaticVoidMethodV+0xe7
>>>>>>>>>>> C  [libCrashNative.so+0x9a9]
>>>>>>>>>>> JNIEnv_::CallStaticVoidMethod(_jclass*,
>>>>>>>>>>> _jmethodID*, ...)+0xb9
>>>>>>>>>>> C  [libCrashNative.so+0xa10]  step3(JNIEnv_*, _jobject*)+0x65
>>>>>>>>>>> C  [libCrashNative.so+0xa69]  step2(JNIEnv_*, _jobject*)+0x57
>>>>>>>>>>> C  [libCrashNative.so+0xa37]  step2(JNIEnv_*, _jobject*)+0x25
>>>>>>>>>>> C  [libCrashNative.so+0xa37]  step2(JNIEnv_*, _jobject*)+0x25
>>>>>>>>>>> C  [libCrashNative.so+0xa37]  step2(JNIEnv_*, _jobject*)+0x25
>>>>>>>>>>> C  [libCrashNative.so+0xa37]  step2(JNIEnv_*, _jobject*)+0x25
>>>>>>>>>>> C  [libCrashNative.so+0xa37]  step2(JNIEnv_*, _jobject*)+0x25
>>>>>>>>>>> C  [libCrashNative.so+0xa8e]  step1(JNIEnv_*, _jobject*)+0x23
>>>>>>>>>>> C  [libCrashNative.so+0x87f]  Java_CrashNative_nativeMethod+0x23
>>>>>>>>>>> j  CrashNative.nativeMethod()V+0
>>>>>>>>>>> j  CrashNative.main([Ljava/lang/String;)V+9
>>>>>>>>>>> v  ~StubRoutines::call_stub
>>>>>>>>>>> V  [libjvm.so+0x71599f]  JavaCalls::call_helper(JavaValue*,
>>>>>>>>>>> methodHandle*, JavaCallArguments*, Thread*)+0xf8f
>>>>>>>>>>> V  [libjvm.so+0x7384f5]  jni_invoke_static(JNIEnv_*, JavaValue*,
>>>>>>>>>>> _jobject*, JNICallType, _jmethodID*, JNI_ArgumentPusher*,
>>>>>>>>>>> Thread*)
>>>>>>>>>>> [clone .isra.238] [clone .constprop.250]+0x385
>>>>>>>>>>> V  [libjvm.so+0x73b2b0]  jni_CallStaticVoidMethod+0x170
>>>>>>>>>>> C  [libjli.so+0x742a]  JavaMain+0x65a
>>>>>>>>>>> C  [libpthread.so.0+0x7e9a]  start_thread+0xda
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>
>>>
>


More information about the hotspot-dev mailing list