RFR: 8213231: ThreadSnapshot::_threadObj can become stale

[Erik Helin]

On 1/23/19 4:59 PM, Daniel D. Daugherty wrote:
> On 1/23/19 9:17 AM, Erik Helin wrote:
>> On 1/22/19 11:03 PM, David Holmes wrote:
>>> Hi Erik,
>>
>> Hey David, thanks for reviewing!
>>
>>> Good find! This bug made an interesting read. Makes me wonder how we 
>>> may have caught this kind of error sooner? Some kind of unhandled oop 
>>> check? NoSafepointVerifier?
>>
>> Using -XX:+CheckUnhandledOops (and compiling with 
>> -DCHECK_UNHANDLED_OOPS) would have caught the issue, but not exactly 
>> the way we want it. If you look in UnhandledOops::clear_unhandled_oops 
>> you see that it does not assert if an oop is held over a safepoint, it 
>> will overwrite the oopDesc* is with BAD_OOP_ADDR (0xfffffff1). 
>> UnhandledOops does this because it is okay to hold on to an oop over a 
>> safepoint *if* you remember to update the oop again after the 
>> safepoint (this pattern is used at some places in the VM).
>>
>> In the case of this particular bug, we would have crashed in the 
>> ThreadInfo constructor because the java.lang.Thread pointer would have 
>> had the value BAD_OOP_ADDR. This means that we still would have had to 
>> figure out how that java.lang.Thread pointer got the value 
>> BAD_OOP_ADDR. This is better than to track down why the 
>> ThreadInfo.threadName field was stale, but still usually require quite 
>> a bit of archeology in the core file.
>>
>> Adding a NoSafepointVerifier at the top of the constructor for 
>> ThreadSnapshot would have helped. But if we would have realized that 
>> we needed a NoSafepointVerifier, then it would probably have been 
>> better to just use a Handle instead of an oop for the 
>> ThreadSnapshot::_threadObj field. In this particular case we could 
>> have placed a HandleMark at the top of jmm_GetThreadInfo and 
>> jmm_DumpThreads and then used a Handle for ThreadSnapshot::_threadObj.
>>
>> The problem with the Handle approach is that using a Handle for a 
>> field in a class requires the instances of that class to always be 
>> guarded by a HandleMark. This works fine for ThreadSnapshot as it is 
>> used right now, but might not be an applicable technique for all 
>> classes (for example a class that does not have a "lexical lifetime" 
>> and thus can't be guarded by a HandleMark).
>>
>> I have discussed this a bit with Erik Ö and StefanK and we think a 
>> more general solution would be to build something on top of OopStorage 
>> (and potentially combine that with oopHandle). This way you get a safe 
>> and flexible handle for fields in classes. This would probably work 
>> for all but the most performance sensitive scenarios (we can probably 
>> create some special handles for those cases).
>>> On 23/01/2019 12:59 am, Erik Helin wrote:
>>>> Hi all,
>>>>
>>>> this patch fixes a problem when the oop in 
>>>> ThreadSnapshot::_threadObj can become stale. The issue is that the 
>>>> ThreadSnapshot::oops_do method only gets called when a 
>>>> ThreadSnapshot instance has been registered in a ThreadDumpResult 
>>>> (via the ThreadDumpResult::add_thread_snapshot method). But, in 
>>>> order to register a ThreadSnapshot instance, you must first create 
>>>> it. The problem is that the ThreadSnapshot constructor first sets 
>>>> _threadObj to thread->threadObj() and then further down might call 
>>>> ObjectSynchronizer:: get_lock_owner. The call to 
>>>> ObjectSynchronizer:: get_lock_owner can result in a VM_RevokeBias VM 
>>>> operation being executed. If a GC VM operation already is enqueued, 
>>>> then that GC VM operation will run when the VM_RevokeBias VM 
>>>> operation is executed. That GC VM operation will not update the oop 
>>>> in ThreadSafepoint::_threadObj, because that ThreadSnapshot instance 
>>>> has not yet been registered in any ThreadDumpResult (recall that the 
>>>> ThreadSafepoint is being constructed), so the GC has no way to find 
>>>> it. The oop in ThreadSafepoint::_threadObj will then become dangling 
>>>> which most likely will cause the JVM to get a SIGSEGV some time later.
>>>
>>> _blocker_object could suffer the same fate, and possibly 
>>> _blocker_object_owner if there could be other paths leading to a 
>>> safepoint.
>>
>> Yes, that is correct.
>>>> The issue was found when debugging why an instance of 
>>>> java/lang/management/ThreadInfo on the Java heap had a stale pointer 
>>>> in its threadName field. Turns out that the java.lang.Thread 
>>>> instance passed to the ThreadInfo was stale most likely for the 
>>>> reason outlined in the paragraph above.
>>>>
>>>> This patch fixes the issue by ensuring that a ThreadSnapshot is 
>>>> always registered in a ThreadDumpResult before the initialization of 
>>>> the ThreadSnapshot is done. This ensures that the GC will always be 
>>>> able to find the oop ThreadSnapshot::_threadObj via 
>>>> ThreadDumpResult::oops_do.
>>>>
>>>> Webrev:
>>>> http://cr.openjdk.java.net/~ehelin/8213231/00/
>>>
>>> Explanation sounded simple enough - actual change was a little harder 
>>> to follow :)
>>>
>>> src/hotspot/share/services/threadService.cpp
>>>
>>> Initially I was concerned about ensuring all oop fields were NULL but 
>>> I see the ThreadSnapshot constructor handles that. That means some of 
>>> the NULL setting in initialize is redundant:
>>>
>>>   854   _stack_trace = NULL;
>>>   855   _concurrent_locks = NULL;
>>>   856   _next = NULL;
>>>   866   _blocker_object = NULL;
>>>   867   _blocker_object_owner = NULL;
>>
>> Nice catch, I missed removing those assignments, fixed that in version 
>> 01.
>>
>>> src/hotspot/share/services/threadService.hpp
>>>
>>> The new initialize function doesn't need to be public.
>>
>> It does, because it is used from the class ThreadDumpResult, see 
>> ThreadDumpResult::add_thread_snapshot. If we want the constructor for 
>> ThreadSnapshot and ThreadSnapshot::initialize to be private, then 
>> ThreadSnapshot must friend ThreadDumpResult. I did this change for 01, 
>> the added benefit is that the only way to create a ThreadSnapshot* is 
>> now through ThreadDumpResult::add_thread_snapshot (the ThreadSnapshot 
>> constructor is private). This means we have ensured that exactly this 
>> bug can't happen again :)
>>
>> > src/hotspot/share/services/threadService.hpp
>>> +   void link_thread_snapshot(ThreadSnapshot* ts);
>>>
>>> Please follow the existing layout style in that code and shift the 
>>> method name across to align with others.
>>
>> I tried to follow the existing style as much as possible, but the code 
>> in threadService.hpp contradicts itself in a few places :) See if you 
>> prefer the way I indented the function names in 01 (and don't ask me 
>> for my opinion on vertically aligning fields and methods in class 
>> declarations ;).
>>
>> Please see new webrevs at:
>> - full: http://cr.openjdk.java.net/~ehelin/8213231/01/
>> - inc: http://cr.openjdk.java.net/~ehelin/8213231/00-01
> 
> src/hotspot/share/services/threadService.cpp
>      No comments.
> 
> src/hotspot/share/services/threadService.hpp
>      L216:   // ThreadSnasphot instances should only be created via
>          Typo: 'ThreadSnasphot' -> 'ThreadSnapshot'
> 
> Thumbs up. Don't need another webrev for fixing the above typo.

Thanks for re-reviewing! As I wrote to David, I will fix the typo before 
I push.

Thanks,
Erik

> Dan
> 
> 
>>
>> Thanks,
>> Erik
>>
>>> Thanks,
>>> David
>>>
>>>
>>>>
>>>> Issue:
>>>> https://bugs.openjdk.java.net/browse/JDK-8213231
>>>>
>>>> Testing:
>>>> - Tier 1, 2 and 3 on Windows, Mac, Linux (all x86-64)
>>>> - RunThese30M (multiple runs) and RunThese24h on Linux x86-64
>>>>    (please note that I never managed to reproduce the issue, all 
>>>> analysis was done based on a core file)
>>>>
>>>> Thanks,
>>>> Erik
>