RFR(L) 8153224 Monitor deflation prolong safepoints (CR12/v2.12/15-for-jdk15)
Erik Österlund
erik.osterlund at oracle.com
Mon May 18 13:18:57 UTC 2020
Hi Dan,
Looks better now. I would like to comment on some further correctness
problems I discovered though,
as a continuation of some discussions we had before CR12/v2.12/15-for-jdk15
First of all, I misremembered that deflation had a linearization point.
You were right; _contentions
transitioning to a negative value, is not definitive, and not a
linearization point where the whole
operation logically commits, with no going back. This explains my
confusion why is_async_deflated()
both loads the _owner and the _contentions field. Unfortunately, it
seems like it is still wrong.
Because now we are in a situation where we have two separate atomic
variables, and neither one of them
transitions monotonically. Two slippery states.
The two loads do not both happen at one atomic snapshot in time. They
can be both reordered and
interleaved in unfortunate ways. Let's consider a scenario where JT1
performs monitor enter, ST
performs concurrent deflation, while JT2 calls is_async_deflated() on
the monitor.
Consider the following unfortunate interleaving:
JT1: increment _contentions
ST: install the deflation marker into the _owner
JT2: read _owner == deflation marker
JT1: try to CAS :owner from NULL to JT1, but fail due to deflation.
JT1: try to cancel deflation, by CASing _owner from deflation marker to
JT1, succeed.
JT1: decrement _contentions
ST: CAS _contentions from 0 to -max_jint, succeed.
JT2: read _contentions < 0.
At this point JT2 has loaded the two values and returns true; it thinks
that the monitor is_async_deflated().
ST: Read _owner again to see if ABA happened. It did.
ST: Increment _contentions again to bail out of async deflation, but it
is too late.
So it seems to me that the two last lines where the ServiceThread checks
for ABA and then increments the
_contentions counter was supposed to solve some ABA problem. But I don't
think it just narrows the window.
That code should arguably be removed. The damage was really already done
when the counter became negative,
despite JT1 signalling an abort.
The ServiceThread could get preempted before the ABA checks, and all
other threads would have to somehow
recognize anyway that the deflation has aborted, despite the counter
being negative. So the algorithm really
has to work even with that code commented out, AFAICT, which makes that
code confusing and redundant.
In the solution space, I would like to make it so that there really is a
linearization point for committing
the deflation when the counter is decremented to a negative value.
The idea is to let JT1 that aborts the deflation with a successful
_owner flip to leave its stake in the
_contentions counter there when it exits, so that the linearization
point is blocked appropriately. The
responsibility to decrement the _contentions counter falls to the
ServiceThread. Once it tries to CAS
the _contentions from 0 to negative, it is guaranteed to fail if another
thread has flipped back the _owner.
When the service thread fails to make the counter negative (and hence
commit the deflation operation as definitive),
it tries to CAS the _owner back to NULL. If that succeeds, then the
ServiceThread aborted deflation. If that does not
succeed, another thread aborted deflation, and then the ServiceThread
decrements _contentions by 1 to
balance out the counter (as whichever thread left 1 stake in the
_contentions counter).
Now we have a real linearization point. If anyone observes a negative
counter, the deflation is definitive.
If not, it has not yet been decided whether to commit or abort deflation.
The is_async_deflated() function then simply becomes: return
Atomic::load(&_contentions) < 0.
The second issue I would like to highlight is that all places where we
help out with installing back
the object markWord from the ObjectMonitor if a monitor is found to be
deflated, must have more rigorous
fencing between the load of _contentions in the is_async_deflated()
check and the load of the _header in
the install_displaced_markword_in_object() function. This is another
place where there exists IRIW issues.
Therefore, I propose to put another fancy if (nMCA) loadload else
loadload() right before loading the _header
in install_displaced_markword_in_object. If we don't do this then the
two loads can be reordered w.r.t. the
total order. This can result in a racy installation of a new hashCode,
that some threads start observing
and using, not making it to the deflated object header. This would cause
inconsistencies. It is once again a
situation where the value of _contentions to negative is updated by one
thread, and the update of the _header
to have a hashCode is performed by another thread, and all observers
must have a total ordering w.r.t. which
one happened-before the other, or we are in trouble. I'm okay if you
want to wait with commenting on this
until after our off-list IRIW discussion has cooled down though.
Otherwise this looks good. And sorry for more headache.
Thanks,
/Erik
On 2020-05-14 23:40, Daniel D. Daugherty wrote:
> Greetings,
>
> I have made changes to the Async Monitor Deflation code in response to
> the CR11/v2.11/14-for-jdk15 code review cycle. Thanks to David H.,
> Erik O.,
> and Robbin for their OpenJDK reviews in the v2.11 round!
>
> I have attached the change list from CR11 to CR12 and I've also added a
> link to the CR11-to-CR12-changes file to the webrevs so it should be easy
> to find.
>
> Main bug URL:
>
> JDK-8153224 Monitor deflation prolong safepoints
> https://bugs.openjdk.java.net/browse/JDK-8153224
>
> The project is currently baselined on jdk-15+23.
>
> Here's the full webrev URL for those folks that want to see all of the
> current Async Monitor Deflation code in one go (v2.12 full):
>
> http://cr.openjdk.java.net/~dcubed/8153224-webrev/15-for-jdk15%2b23.v2.12.full/
>
>
> Some folks might want to see just what has changed since the last review
> cycle so here's a webrev for that (v2.12 inc):
>
> http://cr.openjdk.java.net/~dcubed/8153224-webrev/15-for-jdk15%2b23.v2.12.inc/
>
>
>
> The OpenJDK wiki is currently at v2.11 and might require minor tweaks
> for v2.12:
>
> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>
> The jdk-15+23 based v2.12 version of the patch is going thru the usual
> Mach5 testing right now.
>
> Thanks, in advance, for any questions, comments or suggestions.
>
> Dan
>
>
> On 5/7/20 1:08 PM, Daniel D. Daugherty wrote:
>> Greetings,
>>
>> I have made changes to the Async Monitor Deflation code in response to
>> the CR10/v2.10/13-for-jdk15 code review cycle and DaCapo-h2 perf
>> testing.
>> Thanks to Erik O., Robbin and David H. for their OpenJDK reviews in the
>> v2.10 round! Thanks to Eric C. for his help in isolating the DaCapo-h2
>> performance regression.
>>
>> With the removal of ref_counting and the ObjectMonitorHandle class, the
>> Async Monitor Deflation project is now closer to Carsten's original
>> prototype. While ref_counting gave us ObjectMonitor* safety enforced by
>> code, I saw a ~22.8% slow down with -XX:-AsyncDeflateIdleMonitors ("off"
>> mode). The slow down with "on" mode -XX:+AsyncDeflateIdleMonitors is
>> ~17%.
>>
>> I have attached the change list from CR10 to CR11 instead of putting
>> it in
>> the body of this email. I've also added a link to the
>> CR10-to-CR11-changes
>> file to the webrevs so it should be easy to find.
>>
>> Main bug URL:
>>
>> JDK-8153224 Monitor deflation prolong safepoints
>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>
>> The project is currently baselined on jdk-15+21.
>>
>> Here's the full webrev URL for those folks that want to see all of the
>> current Async Monitor Deflation code in one go (v2.11 full):
>>
>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/14-for-jdk15%2b21.v2.11.full/
>>
>>
>> Some folks might want to see just what has changed since the last review
>> cycle so here's a webrev for that (v2.11 inc):
>>
>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/14-for-jdk15%2b21.v2.11.inc/
>>
>>
>> Because of the removal of ref_counting and the ObjectMonitorHandle
>> class, the
>> incremental webrev is a bit noisier than I would have preferred.
>>
>>
>> The OpenJDK wiki has NOT YET been updated for this round of changes:
>>
>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>
>> The jdk-15+21 based v2.11 version of the patch has been thru Mach5
>> tier[1-6]
>> testing on Oracle's usual set of platforms. Mach5 tier[78] are still
>> running.
>> I'm running the v2.11 patch through my usual set of stress testing on
>> Linux-X64 and macOSX.
>>
>> I'm planning to do a SPECjbb2015, DaCapo-h2 and volano round on the
>> CR11/v2.11/14-for-jdk15 bits.
>>
>> Thanks, in advance, for any questions, comments or suggestions.
>>
>> Dan
>>
>>
>> On 2/26/20 5:22 PM, Daniel D. Daugherty wrote:
>>> Greetings,
>>>
>>> I have made changes to the Async Monitor Deflation code in response to
>>> the CR9/v2.09/12-for-jdk14 code review cycle. Thanks to Robbin and
>>> Erik O.
>>> for their comments in this round!
>>>
>>> With the extraction and push of {8235931,8236035,8235795} to JDK15, the
>>> Async Monitor Deflation code is back to "just" async deflation changes!
>>>
>>> I have attached the change list from CR9 to CR10 instead of putting
>>> it in
>>> the body of this email. I've also added a link to the
>>> CR9-to-CR10-changes
>>> file to the webrevs so it should be easy to find.
>>>
>>> Main bug URL:
>>>
>>> JDK-8153224 Monitor deflation prolong safepoints
>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>
>>> The project is currently baselined on jdk-15+11.
>>>
>>> Here's the full webrev URL for those folks that want to see all of the
>>> current Async Monitor Deflation code in one go (v2.10 full):
>>>
>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/13-for-jdk15+11.v2.10.full/
>>>
>>>
>>> Some folks might want to see just what has changed since the last
>>> review
>>> cycle so here's a webrev for that (v2.10 inc):
>>>
>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/13-for-jdk15+11.v2.10.inc/
>>>
>>>
>>> Since we backed out the HandshakeAfterDeflateIdleMonitors option and
>>> the
>>> C2 ref_count changes and updated the copyright years, the "inc"
>>> webrev has
>>> a bit more noise in it than usual. Sorry about that!
>>>
>>> The OpenJDK wiki has been updated for this round of changes:
>>>
>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>
>>> The jdk-15+11 based v2.10 version of the patch has been thru Mach5
>>> tier[1-7]
>>> testing on Oracle's usual set of platforms. Mach5 tier8 is still
>>> running.
>>> I'm running the v2.10 patch through my usual set of stress testing on
>>> Linux-X64 and macOSX.
>>>
>>> I'm planning to do a SPECjbb2015 round on the
>>> CR10/v2.20/13-for-jdk15 bits.
>>>
>>> Thanks, in advance, for any questions, comments or suggestions.
>>>
>>> Dan
>>>
>>>
>>> On 2/4/20 9:41 AM, Daniel D. Daugherty wrote:
>>>> Greetings,
>>>>
>>>> This project is no longer targeted to JDK14 so this is NOT an
>>>> urgent code
>>>> review request.
>>>>
>>>> I've extracted the following three fixes from the Async Monitor
>>>> Deflation
>>>> project code:
>>>>
>>>> JDK-8235931 add OM_CACHE_LINE_SIZE and use smaller size on
>>>> SPARCv9 and X64
>>>> https://bugs.openjdk.java.net/browse/JDK-8235931
>>>>
>>>> JDK-8236035 refactor ObjectMonitor::set_owner() and _owner
>>>> field setting
>>>> https://bugs.openjdk.java.net/browse/JDK-8236035
>>>>
>>>> JDK-8235795 replace monitor list
>>>> mux{Acquire,Release}(&gListLock) with spin locks
>>>> https://bugs.openjdk.java.net/browse/JDK-8235795
>>>>
>>>> Each of these has been reviewed separately and will be pushed to JDK15
>>>> in the near future (possibly by the end of this week). Of course,
>>>> there
>>>> were improvements during these review cycles and the purpose of this
>>>> e-mail is to provided updated webrevs for this fix
>>>> (CR9/v2.09/12-for-jdk14)
>>>> within the revised context provided by {8235931, 8236035, 8235795}.
>>>>
>>>> Main bug URL:
>>>>
>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>
>>>> The project is currently baselined on jdk-14+34.
>>>>
>>>> Here's the full webrev URL for those folks that want to see all of the
>>>> current Async Monitor Deflation code along with {8235931, 8236035,
>>>> 8235795}
>>>> in one go (v2.09b full):
>>>>
>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/12-for-jdk14.v2.09b.full/
>>>>
>>>>
>>>> Compare the open.patch file in 12-for-jdk14.v2.09.full and
>>>> 12-for-jdk14.v2.09b.full
>>>> using your favorite file comparison/merge tool to see how Async
>>>> Monitor Deflation
>>>> evolved due to {8235931, 8236035, 8235795}.
>>>>
>>>> Some folks might want to see just the Async Monitor Deflation code
>>>> on top of
>>>> {8235931, 8236035, 8235795} so here's a webrev for that (v2.09b inc):
>>>>
>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/12-for-jdk14.v2.09b.inc/
>>>>
>>>>
>>>> These webrevs have gone thru several Mach5 Tier[1-8] runs along with
>>>> my usual stress testing and SPECjbb2015 testing and there aren't any
>>>> surprises relative to CR9/v2.09/12-for-jdk14.
>>>>
>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>
>>>> Dan
>>>>
>>>>
>>>> On 12/11/19 3:41 PM, Daniel D. Daugherty wrote:
>>>>> Greetings,
>>>>>
>>>>> I have made changes to the Async Monitor Deflation code in
>>>>> response to
>>>>> the CR8/v2.08/11-for-jdk14 code review cycle. Thanks to David H.,
>>>>> Robbin
>>>>> and Erik O. for their comments!
>>>>>
>>>>> This project is no longer targeted to JDK14 so this is NOT an
>>>>> urgent code
>>>>> review request. The primary purpose of this webrev is simply to
>>>>> close the
>>>>> CR8/v2.08/11-for-jdk14 code review loop and to let folks see how I
>>>>> resolved
>>>>> the code review comments from that round.
>>>>>
>>>>> Most of the comments in the CR8/v2.08/11-for-jdk14 code review
>>>>> cycle were
>>>>> on the monitor list changes so I'm going to take a look at
>>>>> extracting those
>>>>> changes into a standalone patch. Switching from
>>>>> Thread::muxAcquire(&gListLock)
>>>>> and Thread::muxRelease(&gListLock) to finer grained internal spin
>>>>> locks needs
>>>>> to be thoroughly reviewed and the best way to do that is
>>>>> separately from the
>>>>> Async Monitor Deflation changes. Thanks to Coleen for suggesting
>>>>> doing this
>>>>> extraction earlier.
>>>>>
>>>>> I have attached the change list from CR8 to CR9 instead of putting
>>>>> it in
>>>>> the body of this email. I've also added a link to the
>>>>> CR8-to-CR9-changes
>>>>> file to the webrevs so it should be easy to find.
>>>>>
>>>>> Main bug URL:
>>>>>
>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>
>>>>> The project is currently baselined on jdk-14+26.
>>>>>
>>>>> Here's the full webrev URL for those folks that want to see all of
>>>>> the
>>>>> current Async Monitor Deflation code in one go (v2.09 full):
>>>>>
>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/12-for-jdk14.v2.09.full/
>>>>>
>>>>>
>>>>> Some folks might want to see just what has changed since the last
>>>>> review
>>>>> cycle so here's a webrev for that (v2.09 inc):
>>>>>
>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/12-for-jdk14.v2.09.inc/
>>>>>
>>>>>
>>>>> The OpenJDK wiki has NOT yet been updated for this round of changes:
>>>>>
>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>
>>>>> The jdk-14+26 based v2.09 version of the patch has been thru Mach5
>>>>> tier[1-7]
>>>>> testing on Oracle's usual set of platforms. Mach5 tier8 is still
>>>>> running.
>>>>> A slightly older version of the v2.09 patch has also been through
>>>>> my usual
>>>>> set of stress testing on Linux-X64 and macOSX with the addition of
>>>>> Robbin's
>>>>> "MoCrazy 1024" test running in parallel on Linux-X64 with the
>>>>> other tests in
>>>>> my lab. The "MoCrazy 1024" has been going for > 5 days and 6700+
>>>>> iterations
>>>>> without any failures.
>>>>>
>>>>> I'm planning to do a SPECjbb2015 round on the
>>>>> CR9/v2.09/12-for-jdk14 bits.
>>>>>
>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>
>>>>> Dan
>>>>>
>>>>>
>>>>> On 11/4/19 4:03 PM, Daniel D. Daugherty wrote:
>>>>>> Greetings,
>>>>>>
>>>>>> I have made changes to the Async Monitor Deflation code in
>>>>>> response to
>>>>>> the CR7/v2.07/10-for-jdk14 code review cycle. Thanks to David H.,
>>>>>> Robbin
>>>>>> and Erik O. for their comments!
>>>>>>
>>>>>> JDK14 Rampdown phase one is coming on Dec. 12, 2019 and the Async
>>>>>> Monitor
>>>>>> Deflation project needs to push before Nov. 12, 2019 in order to
>>>>>> allow
>>>>>> for sufficient bake time for such a big change. Nov. 12 is _next_
>>>>>> Tuesday
>>>>>> so we have 8 days from today to finish this code review cycle and
>>>>>> push
>>>>>> this code for JDK14.
>>>>>>
>>>>>> Carsten and Roman! Time for you guys to chime in again on the
>>>>>> code reviews.
>>>>>>
>>>>>> I have attached the change list from CR7 to CR8 instead of
>>>>>> putting it in
>>>>>> the body of this email. I've also added a link to the
>>>>>> CR7-to-CR8-changes
>>>>>> file to the webrevs so it should be easy to find.
>>>>>>
>>>>>> Main bug URL:
>>>>>>
>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>
>>>>>> The project is currently baselined on jdk-14+21.
>>>>>>
>>>>>> Here's the full webrev URL for those folks that want to see all
>>>>>> of the
>>>>>> current Async Monitor Deflation code in one go (v2.08 full):
>>>>>>
>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/11-for-jdk14.v2.08.full
>>>>>>
>>>>>>
>>>>>> Some folks might want to see just what has changed since the last
>>>>>> review
>>>>>> cycle so here's a webrev for that (v2.08 inc):
>>>>>>
>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/11-for-jdk14.v2.08.inc/
>>>>>>
>>>>>>
>>>>>> The OpenJDK wiki did not need any changes for this round:
>>>>>>
>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>
>>>>>>
>>>>>> The jdk-14+21 based v2.08 version of the patch has been thru
>>>>>> Mach5 tier[1-8]
>>>>>> testing on Oracle's usual set of platforms. It has also been
>>>>>> through my usual
>>>>>> set of stress testing on Linux-X64, macOSX and Solaris-X64 with
>>>>>> the addition
>>>>>> of Robbin's "MoCrazy 1024" test running in parallel with the
>>>>>> other tests in
>>>>>> my lab. Some testing is still running, but so far there are no
>>>>>> new regressions.
>>>>>>
>>>>>> I have not yet done a SPECjbb2015 round on the
>>>>>> CR8/v2.08/11-for-jdk14 bits.
>>>>>>
>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>
>>>>>> Dan
>>>>>>
>>>>>>
>>>>>> On 10/17/19 5:50 PM, Daniel D. Daugherty wrote:
>>>>>>> Greetings,
>>>>>>>
>>>>>>> The Async Monitor Deflation project is reaching the end game. I
>>>>>>> have no
>>>>>>> changes planned for the project at this time so all that is left
>>>>>>> is code
>>>>>>> review and any changes that results from those reviews.
>>>>>>>
>>>>>>> Carsten and Roman! Time for you guys to chime in again on the
>>>>>>> code reviews.
>>>>>>>
>>>>>>> I have attached the list of fixes from CR6 to CR7 instead of
>>>>>>> putting it
>>>>>>> in the main body of this email.
>>>>>>>
>>>>>>> Main bug URL:
>>>>>>>
>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>
>>>>>>> The project is currently baselined on jdk-14+19.
>>>>>>>
>>>>>>> Here's the full webrev URL for those folks that want to see all
>>>>>>> of the
>>>>>>> current Async Monitor Deflation code in one go (v2.07 full):
>>>>>>>
>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/10-for-jdk14.v2.07.full
>>>>>>>
>>>>>>>
>>>>>>> Some folks might want to see just what has changed since the
>>>>>>> last review
>>>>>>> cycle so here's a webrev for that (v2.07 inc):
>>>>>>>
>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/10-for-jdk14.v2.07.inc/
>>>>>>>
>>>>>>>
>>>>>>> The OpenJDK wiki has been updated to match the
>>>>>>> CR7/v2.07/10-for-jdk14 changes:
>>>>>>>
>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>
>>>>>>>
>>>>>>> The jdk-14+18 based v2.07 version of the patch has been thru
>>>>>>> Mach5 tier[1-8]
>>>>>>> testing on Oracle's usual set of platforms. It has also been
>>>>>>> through my usual
>>>>>>> set of stress testing on Linux-X64, macOSX and Solaris-X64 with
>>>>>>> the addition
>>>>>>> of Robbin's "MoCrazy 1024" test running in parallel with the
>>>>>>> other tests in
>>>>>>> my lab.
>>>>>>>
>>>>>>> The jdk-14+19 based v2.07 version of the patch has been thru
>>>>>>> Mach5 tier[1-3]
>>>>>>> test on Oracle's usual set of platforms. Mach5 tier[4-8] are in
>>>>>>> process.
>>>>>>>
>>>>>>> I did another round of SPECjbb2015 testing in Oracle's Aurora
>>>>>>> Performance lab
>>>>>>> using using their tuned SPECjbb2015 Linux-X64 G1 configs:
>>>>>>>
>>>>>>> - "base" is jdk-14+18
>>>>>>> - "v2.07" is the latest version and includes C2
>>>>>>> inc_om_ref_count() support
>>>>>>> on LP64 X64 and the new HandshakeAfterDeflateIdleMonitors
>>>>>>> option
>>>>>>> - "off" is with -XX:-AsyncDeflateIdleMonitors specified
>>>>>>> - "handshake" is with -XX:+HandshakeAfterDeflateIdleMonitors
>>>>>>> specified
>>>>>>>
>>>>>>> hbIR hbIR
>>>>>>> (max attempted) (settled) max-jOPS critical-jOPS runtime
>>>>>>> --------------- --------- -------- ------------- -------
>>>>>>> 34282.00 30635.90 28831.30 20969.20 3841.30 base
>>>>>>> 34282.00 30973.00 29345.80 21025.20 3964.10 v2.07
>>>>>>> 34282.00 31105.60 29174.30 21074.00 3931.30
>>>>>>> v2.07_handshake
>>>>>>> 34282.00 30789.70 27151.60 19839.10 3850.20 v2.07_off
>>>>>>>
>>>>>>> - The Aurora Perf comparison tool reports:
>>>>>>>
>>>>>>> Comparison max-jOPS critical-jOPS
>>>>>>> ---------------------- --------------------
>>>>>>> --------------------
>>>>>>> base vs 2.07 +1.78% (s, p=0.000) +0.27% (ns,
>>>>>>> p=0.790)
>>>>>>> base vs 2.07_handshake +1.19% (s, p=0.007) +0.58% (ns,
>>>>>>> p=0.536)
>>>>>>> base vs 2.07_off -5.83% (ns, p=0.394) -5.39% (ns,
>>>>>>> p=0.347)
>>>>>>>
>>>>>>> (s) - significant (ns) - not-significant
>>>>>>>
>>>>>>> - For historical comparison, the Aurora Perf comparision tool
>>>>>>> reported for v2.06 with a baseline of jdk-13+31:
>>>>>>>
>>>>>>> Comparison max-jOPS critical-jOPS
>>>>>>> ---------------------- --------------------
>>>>>>> --------------------
>>>>>>> base vs 2.06 -0.32% (ns, p=0.345) +0.71% (ns,
>>>>>>> p=0.646)
>>>>>>> base vs 2.06_off +0.49% (ns, p=0.292) -1.21% (ns,
>>>>>>> p=0.481)
>>>>>>>
>>>>>>> (s) - significant (ns) - not-significant
>>>>>>>
>>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>>
>>>>>>> Dan
>>>>>>>
>>>>>>>
>>>>>>> On 8/28/19 5:02 PM, Daniel D. Daugherty wrote:
>>>>>>>> Greetings,
>>>>>>>>
>>>>>>>> The Async Monitor Deflation project has rebased to JDK14 so
>>>>>>>> it's time
>>>>>>>> for our first code review in that new context!!
>>>>>>>>
>>>>>>>> I've been focused on changing the monitor list management code
>>>>>>>> to be
>>>>>>>> lock-free in order to make SPECjbb2015 happier. Of course with
>>>>>>>> a change
>>>>>>>> like that, it takes a while to chase down all the new and
>>>>>>>> wonderful
>>>>>>>> races. At this point, I have the code back to the same
>>>>>>>> stability that
>>>>>>>> I had with CR5/v2.05/8-for-jdk13.
>>>>>>>>
>>>>>>>> To lay the ground work for this round of review, I pushed the
>>>>>>>> following
>>>>>>>> two fixes to jdk/jdk earlier today:
>>>>>>>>
>>>>>>>> JDK-8230184 rename, whitespace, indent and comments changes
>>>>>>>> in preparation
>>>>>>>> for lock free Monitor lists
>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8230184
>>>>>>>>
>>>>>>>> JDK-8230317 serviceability/sa/ClhsdbPrintStatics.java fails
>>>>>>>> after 8230184
>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8230317
>>>>>>>>
>>>>>>>> I have attached the list of fixes from CR5 to CR6 instead of
>>>>>>>> putting
>>>>>>>> in the main body of this email.
>>>>>>>>
>>>>>>>> Main bug URL:
>>>>>>>>
>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>
>>>>>>>> The project is currently baselined on jdk-14+11 plus the fixes for
>>>>>>>> JDK-8230184 and JDK-8230317.
>>>>>>>>
>>>>>>>> Here's the full webrev URL for those folks that want to see all
>>>>>>>> of the
>>>>>>>> current Async Monitor Deflation code in one go (v2.06 full):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.06.full/
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> The primary focus of this review cycle is on the lock-free
>>>>>>>> Monitor List
>>>>>>>> management changes so here's a webrev for just that patch
>>>>>>>> (v2.06c):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.06c.inc/
>>>>>>>>
>>>>>>>>
>>>>>>>> The secondary focus of this review cycle is on the bug fixes
>>>>>>>> that have
>>>>>>>> been made since CR5/v2.05/8-for-jdk13 so here's a webrev for
>>>>>>>> just that
>>>>>>>> patch (v2.06b):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.06b.inc/
>>>>>>>>
>>>>>>>>
>>>>>>>> The third and final bucket for this review cycle is the rename,
>>>>>>>> whitespace,
>>>>>>>> indent and comments changes made in preparation for lock free
>>>>>>>> Monitor list
>>>>>>>> management. Almost all of that was extracted into JDK-8230184
>>>>>>>> for the
>>>>>>>> baseline so this bucket now has just a few comment changes
>>>>>>>> relative to
>>>>>>>> CR5/v2.05/8-for-jdk13. Here's a webrev for the remainder (v2.06a):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.06a.inc/
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Some folks might want to see just what has changed since the
>>>>>>>> last review
>>>>>>>> cycle so here's a webrev for that (v2.06 inc):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.06.inc/
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Last, but not least, some folks might want to see the code
>>>>>>>> before the
>>>>>>>> addition of lock-free Monitor List management so here's a
>>>>>>>> webrev for
>>>>>>>> that (v2.00 -> v2.05):
>>>>>>>>
>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/9-for-jdk14.v2.05.inc/
>>>>>>>>
>>>>>>>>
>>>>>>>> The OpenJDK wiki will need minor updates to match the CR6 changes:
>>>>>>>>
>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>
>>>>>>>>
>>>>>>>> but that should only be changes to describe per-thread list
>>>>>>>> async monitor
>>>>>>>> deflation being done by the ServiceThread.
>>>>>>>>
>>>>>>>> (I did update the OpenJDK wiki for the CR5 changes back on
>>>>>>>> 2019.08.14)
>>>>>>>>
>>>>>>>> This version of the patch has been thru Mach5 tier[1-8] testing on
>>>>>>>> Oracle's usual set of platforms. It has also been through my
>>>>>>>> usual set
>>>>>>>> of stress testing on Linux-X64, macOSX and Solaris-X64.
>>>>>>>>
>>>>>>>> I did a bunch of SPECjbb2015 testing in Oracle's Aurora
>>>>>>>> Performance lab
>>>>>>>> using using their tuned SPECjbb2015 Linux-X64 G1 configs. This
>>>>>>>> was using
>>>>>>>> this patch baselined on jdk-13+31 (for stability):
>>>>>>>>
>>>>>>>> hbIR hbIR
>>>>>>>> (max attempted) (settled) max-jOPS critical-jOPS runtime
>>>>>>>> --------------- --------- -------- ------------- -------
>>>>>>>> 34282.00 28837.20 27905.20 19817.40 3658.10 base
>>>>>>>> 34965.70 29798.80 27814.90 19959.00 3514.60 v2.06d
>>>>>>>> 34282.00 29100.70 28042.50 19577.00 3701.90
>>>>>>>> v2.06d_off
>>>>>>>> 34282.00 29218.50 27562.80 19397.30 3657.60
>>>>>>>> v2.06d_ocache
>>>>>>>> 34965.70 29838.30 26512.40 19170.60 3569.90 v2.05
>>>>>>>> 34282.00 28926.10 27734.00 19835.10 3588.40
>>>>>>>> v2.05_off
>>>>>>>>
>>>>>>>> The "off" configs are with -XX:-AsyncDeflateIdleMonitors
>>>>>>>> specified and
>>>>>>>> the "ocache" config is with 128 byte cache line sizes instead
>>>>>>>> of 64 byte
>>>>>>>> cache lines sizes. "v2.06d" is the last set of changes that I
>>>>>>>> made before
>>>>>>>> those changes were distributed into the "v2.06a", "v2.06b" and
>>>>>>>> "v2.06c"
>>>>>>>> buckets for this review recycle.
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>>>
>>>>>>>> Dan
>>>>>>>>
>>>>>>>>
>>>>>>>> On 7/11/19 3:49 PM, Daniel D. Daugherty wrote:
>>>>>>>>> Greetings,
>>>>>>>>>
>>>>>>>>> I've been focused on chasing down and fixing the rare test
>>>>>>>>> failures
>>>>>>>>> that only pop up rarely. So this round is primarily fixes for
>>>>>>>>> races
>>>>>>>>> with a few additional fixes that came from Karen's review of CR4.
>>>>>>>>> Thanks Karen!
>>>>>>>>>
>>>>>>>>> I have attached the list of fixes from CR4 to CR5 instead of
>>>>>>>>> putting
>>>>>>>>> in the main body of this email.
>>>>>>>>>
>>>>>>>>> Main bug URL:
>>>>>>>>>
>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>
>>>>>>>>> The project is currently baselined on jdk-13+29. This will
>>>>>>>>> likely be
>>>>>>>>> the last JDK13 baseline for this project and I'll roll to the
>>>>>>>>> JDK14
>>>>>>>>> (jdk/jdk) repo soon...
>>>>>>>>>
>>>>>>>>> Here's the full webrev URL:
>>>>>>>>>
>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/8-for-jdk13.full/
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Here's the incremental webrev URL:
>>>>>>>>>
>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/8-for-jdk13.inc/
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have not yet checked the OpenJDK wiki to see if it needs any
>>>>>>>>> updates
>>>>>>>>> to match the CR5 changes:
>>>>>>>>>
>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> (I did update the OpenJDK wiki for the CR4 changes back on
>>>>>>>>> 2019.06.26)
>>>>>>>>>
>>>>>>>>> This version of the patch has been thru Mach5 tier[1-3]
>>>>>>>>> testing on
>>>>>>>>> Oracle's usual set of platforms. Mach5 tier[4-6] is running
>>>>>>>>> now and
>>>>>>>>> Mach5 tier[78] will follow. I'll kick off the usual stress
>>>>>>>>> testing
>>>>>>>>> on Linux-X64, macOSX and Solaris-X64 as those machines become
>>>>>>>>> available.
>>>>>>>>> Since I haven't made any performance changes in this round,
>>>>>>>>> I'll only
>>>>>>>>> be running SPECjbb2015 to gather the latest monitorinflation
>>>>>>>>> logs.
>>>>>>>>>
>>>>>>>>> Next up:
>>>>>>>>>
>>>>>>>>> - We're still seeing 4-5% lower performance with SPECjbb2015 on
>>>>>>>>> Linux-X64 and we've determined that some of that comes from
>>>>>>>>> contention on the gListLock. So I'm going to investigate
>>>>>>>>> removing
>>>>>>>>> the gListLock. Yes, another lock free set of changes is coming!
>>>>>>>>> - Of course, going lock free often causes new races and new
>>>>>>>>> failures
>>>>>>>>> so that's a good reason for make those changes isolated in
>>>>>>>>> their
>>>>>>>>> own round (and not holding up CR5/v2.05/8-for-jdk13 anymore).
>>>>>>>>> - I finally have a potential fix for the Win* failure with
>>>>>>>>> gc/g1/humongousObjects/TestHumongousClassLoader.java
>>>>>>>>> but I haven't run it through Mach5 yet so it'll be in the
>>>>>>>>> next round.
>>>>>>>>> - Some RTM tests were recently re-enabled in Mach5 and I'm
>>>>>>>>> seeing some
>>>>>>>>> monitor related failures there. I suspect that I need to go
>>>>>>>>> take a
>>>>>>>>> look at the C2 RTM macro assembler code and look for things
>>>>>>>>> that might
>>>>>>>>> conflict if Async Monitor Deflation. If you're interested in
>>>>>>>>> that kind
>>>>>>>>> of issue, then see the macroAssembler_x86.cpp sanity check
>>>>>>>>> that I
>>>>>>>>> added in this round!
>>>>>>>>>
>>>>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>>>>
>>>>>>>>> Dan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 5/26/19 8:30 PM, Daniel D. Daugherty wrote:
>>>>>>>>>> Greetings,
>>>>>>>>>>
>>>>>>>>>> I have a fix for an issue that came up during performance
>>>>>>>>>> testing.
>>>>>>>>>> Many thanks to Robbin for diagnosing the issue in his
>>>>>>>>>> SPECjbb2015
>>>>>>>>>> experiments.
>>>>>>>>>>
>>>>>>>>>> Here's the list of changes from CR3 to CR4. The list is a bit
>>>>>>>>>> verbose due to the complexity of the issue, but the changes
>>>>>>>>>> themselves are not that big.
>>>>>>>>>>
>>>>>>>>>> Functional:
>>>>>>>>>> - Change SafepointSynchronize::is_cleanup_needed() from
>>>>>>>>>> calling
>>>>>>>>>> ObjectSynchronizer::is_cleanup_needed() to calling
>>>>>>>>>> ObjectSynchronizer::is_safepoint_deflation_needed():
>>>>>>>>>> - is_safepoint_deflation_needed() returns the result of
>>>>>>>>>> monitors_used_above_threshold() for safepoint based
>>>>>>>>>> monitor deflation (!AsyncDeflateIdleMonitors).
>>>>>>>>>> - For AsyncDeflateIdleMonitors, it only returns true if
>>>>>>>>>> there is a special deflation request, e.g., System.gc()
>>>>>>>>>> - This solves a bug where there are a bunch of Cleanup
>>>>>>>>>> safepoints that simply request async deflation which
>>>>>>>>>> keeps the async JavaThreads from making progress on
>>>>>>>>>> their async deflation work.
>>>>>>>>>> - Add AsyncDeflationInterval diagnostic option. Description:
>>>>>>>>>> Async deflate idle monitors every so many milliseconds
>>>>>>>>>> when
>>>>>>>>>> MonitorUsedDeflationThreshold is exceeded (0 is off).
>>>>>>>>>> - Replace
>>>>>>>>>> ObjectSynchronizer::gOmShouldDeflateIdleMonitors() with
>>>>>>>>>> ObjectSynchronizer::is_async_deflation_needed():
>>>>>>>>>> - is_async_deflation_needed() returns true when
>>>>>>>>>> is_async_cleanup_requested() is true or when
>>>>>>>>>> monitors_used_above_threshold() is true (but no more
>>>>>>>>>> often than
>>>>>>>>>> AsyncDeflationInterval).
>>>>>>>>>> - if AsyncDeflateIdleMonitors Service_lock->wait() now
>>>>>>>>>> waits for
>>>>>>>>>> at most GuaranteedSafepointInterval millis:
>>>>>>>>>> - This allows is_async_deflation_needed() to be checked at
>>>>>>>>>> the same interval as GuaranteedSafepointInterval.
>>>>>>>>>> (default is 1000 millis/1 second)
>>>>>>>>>> - Once is_async_deflation_needed() has returned true, it
>>>>>>>>>> generally cannot return true for AsyncDeflationInterval.
>>>>>>>>>> This is to prevent async deflation from swamping the
>>>>>>>>>> ServiceThread.
>>>>>>>>>> - The ServiceThread still handles async deflation of the
>>>>>>>>>> global
>>>>>>>>>> in-use list and now it also marks JavaThreads for async
>>>>>>>>>> deflation
>>>>>>>>>> of their in-use lists.
>>>>>>>>>> - The ServiceThread will check for async deflation work
>>>>>>>>>> every
>>>>>>>>>> GuaranteedSafepointInterval.
>>>>>>>>>> - A safepoint can still cause the ServiceThread to check for
>>>>>>>>>> async deflation work via is_async_deflation_requested.
>>>>>>>>>> - Refactor code from
>>>>>>>>>> ObjectSynchronizer::is_cleanup_needed() into
>>>>>>>>>> monitors_used_above_threshold() and remove
>>>>>>>>>> is_cleanup_needed().
>>>>>>>>>> - In addition to System.gc(), the VM_Exit VM op and the final
>>>>>>>>>> VMThread safepoint now set the
>>>>>>>>>> is_special_deflation_requested
>>>>>>>>>> flag to reduce the in-use monitor population that is
>>>>>>>>>> reported by
>>>>>>>>>> ObjectSynchronizer::log_in_use_monitor_details() at VM exit.
>>>>>>>>>>
>>>>>>>>>> Test update:
>>>>>>>>>> - test/hotspot/gtest/oops/test_markOop.cpp is updated to
>>>>>>>>>> work with
>>>>>>>>>> AsyncDeflateIdleMonitors.
>>>>>>>>>>
>>>>>>>>>> Collateral:
>>>>>>>>>> - Add/clarify/update some logging messages.
>>>>>>>>>>
>>>>>>>>>> Cleanup:
>>>>>>>>>> - Updated comments based on Karen's code review.
>>>>>>>>>> - Change 'special cleanup' -> 'special deflation' and
>>>>>>>>>> 'async cleanup' -> 'async deflation'.
>>>>>>>>>> - comment and function name changes
>>>>>>>>>> - Clarify MonitorUsedDeflationThreshold description;
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Main bug URL:
>>>>>>>>>>
>>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>>
>>>>>>>>>> The project is currently baselined on jdk-13+22.
>>>>>>>>>>
>>>>>>>>>> Here's the full webrev URL:
>>>>>>>>>>
>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/7-for-jdk13.full/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Here's the incremental webrev URL:
>>>>>>>>>>
>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/7-for-jdk13.inc/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have not updated the OpenJDK wiki to reflect the CR4 changes:
>>>>>>>>>>
>>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> The wiki doesn't say a whole lot about the async deflation
>>>>>>>>>> invocation
>>>>>>>>>> mechanism so I have to figure out how to add that content.
>>>>>>>>>>
>>>>>>>>>> This version of the patch has been thru Mach5 tier[1-8]
>>>>>>>>>> testing on
>>>>>>>>>> Oracle's usual set of platforms. My Solaris-X64 stress kit
>>>>>>>>>> run is
>>>>>>>>>> running now. Kitchensink8H on product, fastdebug, and
>>>>>>>>>> slowdebug bits
>>>>>>>>>> are running on Linux-X64, MacOSX and Solaris-X64. I still
>>>>>>>>>> have to run
>>>>>>>>>> my stress kit on Linux-X64. I still have to run the SPECjbb2015
>>>>>>>>>> baseline and CR4 runs on Linux-X64, MacOSX and Solaris-X64.
>>>>>>>>>>
>>>>>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>>>>>
>>>>>>>>>> Dan
>>>>>>>>>>
>>>>>>>>>> On 5/6/19 11:52 AM, Daniel D. Daugherty wrote:
>>>>>>>>>>> Greetings,
>>>>>>>>>>>
>>>>>>>>>>> I had some discussions with Karen about a race that was in the
>>>>>>>>>>> ObjectMonitor::enter() code in CR2/v2.02/5-for-jdk13. This
>>>>>>>>>>> race was
>>>>>>>>>>> theoretical and I had no test failures due to it. The fix is
>>>>>>>>>>> pretty
>>>>>>>>>>> simple: remove the special case code for async deflation in the
>>>>>>>>>>> ObjectMonitor::enter() function and rely solely on the
>>>>>>>>>>> ref_count
>>>>>>>>>>> for ObjectMonitor::enter() protection.
>>>>>>>>>>>
>>>>>>>>>>> During those discussions Karen also floated the idea of
>>>>>>>>>>> using the
>>>>>>>>>>> ref_count field instead of the contentions field for the Async
>>>>>>>>>>> Monitor Deflation protocol. I decided to go ahead and code
>>>>>>>>>>> up that
>>>>>>>>>>> change and I have run it through the usual stress and Mach5
>>>>>>>>>>> testing
>>>>>>>>>>> with no issues. It's also known as v2.03 (for those for with
>>>>>>>>>>> the
>>>>>>>>>>> patches) and as webrev/6-for-jdk13 (for those with webrev
>>>>>>>>>>> URLs).
>>>>>>>>>>> Sorry for all the names...
>>>>>>>>>>>
>>>>>>>>>>> Main bug URL:
>>>>>>>>>>>
>>>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>>>
>>>>>>>>>>> The project is currently baselined on jdk-13+18.
>>>>>>>>>>>
>>>>>>>>>>> Here's the full webrev URL:
>>>>>>>>>>>
>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/6-for-jdk13.full/
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Here's the incremental webrev URL:
>>>>>>>>>>>
>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/6-for-jdk13.inc/
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I have also updated the OpenJDK wiki to reflect the CR3
>>>>>>>>>>> changes:
>>>>>>>>>>>
>>>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> This version of the patch has been thru Mach5 tier[1-8]
>>>>>>>>>>> testing on
>>>>>>>>>>> Oracle's usual set of platforms. My Solaris-X64 stress kit
>>>>>>>>>>> run had
>>>>>>>>>>> no issues. Kitchensink8H on product, fastdebug, and
>>>>>>>>>>> slowdebug bits
>>>>>>>>>>> had no failures on Linux-X64; MacOSX fastdebug and slowdebug
>>>>>>>>>>> and
>>>>>>>>>>> Solaris-X64 release had the usual "Too large time diff"
>>>>>>>>>>> complaints.
>>>>>>>>>>> 12 hour Inflate2 runs on product, fastdebug and slowdebug
>>>>>>>>>>> bits on
>>>>>>>>>>> Linux-X64, MacOSX and Solaris-X64 had no failures. My Linux-X64
>>>>>>>>>>> stress kit is running right now.
>>>>>>>>>>>
>>>>>>>>>>> I've done the SPECjbb2015 baseline and CR3 runs. I need to
>>>>>>>>>>> gather
>>>>>>>>>>> the results and analyze them.
>>>>>>>>>>>
>>>>>>>>>>> Thanks, in advance, for any questions, comments or suggestions.
>>>>>>>>>>>
>>>>>>>>>>> Dan
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 4/25/19 12:38 PM, Daniel D. Daugherty wrote:
>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>
>>>>>>>>>>>> I have a small but important bug fix for the Async Monitor
>>>>>>>>>>>> Deflation
>>>>>>>>>>>> project ready to go. It's also known as v2.02 (for those
>>>>>>>>>>>> for with the
>>>>>>>>>>>> patches) and as webrev/5-for-jdk13 (for those with webrev
>>>>>>>>>>>> URLs). Sorry
>>>>>>>>>>>> for all the names...
>>>>>>>>>>>>
>>>>>>>>>>>> JDK-8222295 was pushed to jdk/jdk two days ago so that
>>>>>>>>>>>> baseline patch
>>>>>>>>>>>> is out of our hair.
>>>>>>>>>>>>
>>>>>>>>>>>> Main bug URL:
>>>>>>>>>>>>
>>>>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>>>>
>>>>>>>>>>>> The project is currently baselined on jdk-13+17.
>>>>>>>>>>>>
>>>>>>>>>>>> Here's the full webrev URL:
>>>>>>>>>>>>
>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/5-for-jdk13.full/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Here's the incremental webrev URL (JDK-8153224):
>>>>>>>>>>>>
>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/5-for-jdk13.inc/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I still have to update the OpenJDK wiki to reflect the CR2
>>>>>>>>>>>> changes:
>>>>>>>>>>>>
>>>>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> This version of the patch has been thru Mach5 tier[1-6]
>>>>>>>>>>>> testing on
>>>>>>>>>>>> Oracle's usual set of platforms. Mach5 tier[7-8] is running
>>>>>>>>>>>> now.
>>>>>>>>>>>> My stress kit is running on Solaris-X64 now. Kitchensink8H
>>>>>>>>>>>> is running
>>>>>>>>>>>> now on product, fastdebug, and slowdebug bits on Linux-X64,
>>>>>>>>>>>> MacOSX
>>>>>>>>>>>> and Solaris-X64. 12 hour Inflate2 runs are running now on
>>>>>>>>>>>> product,
>>>>>>>>>>>> fastdebug and slowdebug bits on Linux-X64, MacOSX and
>>>>>>>>>>>> Solaris-X64.
>>>>>>>>>>>> I'll start my my stress kit on Linux-X64 sometime on Sunday
>>>>>>>>>>>> (after
>>>>>>>>>>>> my jdk-13+18 stress run is done).
>>>>>>>>>>>>
>>>>>>>>>>>> I'll do SPECjbb2015 baseline and CR2 runs after all the stress
>>>>>>>>>>>> testing is done.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks, in advance, for any questions, comments or
>>>>>>>>>>>> suggestions.
>>>>>>>>>>>>
>>>>>>>>>>>> Dan
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 4/19/19 11:58 AM, Daniel D. Daugherty wrote:
>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I finally have CR1 for the Async Monitor Deflation project
>>>>>>>>>>>>> ready to
>>>>>>>>>>>>> go. It's also known as v2.01 (for those for with the
>>>>>>>>>>>>> patches) and as
>>>>>>>>>>>>> webrev/4-for-jdk13 (for those with webrev URLs). Sorry for
>>>>>>>>>>>>> all the
>>>>>>>>>>>>> names...
>>>>>>>>>>>>>
>>>>>>>>>>>>> Main bug URL:
>>>>>>>>>>>>>
>>>>>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>>>>>
>>>>>>>>>>>>> Baseline bug fixes URL:
>>>>>>>>>>>>>
>>>>>>>>>>>>> JDK-8222295 more baseline cleanups from Async Monitor
>>>>>>>>>>>>> Deflation project
>>>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8222295
>>>>>>>>>>>>>
>>>>>>>>>>>>> The project is currently baselined on jdk-13+15.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here's the webrev for the latest baseline changes
>>>>>>>>>>>>> (JDK-8222295):
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/4-for-jdk13.8222295
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here's the full webrev URL (JDK-8153224 only):
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/4-for-jdk13.full/
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here's the incremental webrev URL (JDK-8153224):
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/4-for-jdk13.inc/
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> So I'm looking for reviews for both JDK-8222295 and the
>>>>>>>>>>>>> latest version
>>>>>>>>>>>>> of JDK-8153224...
>>>>>>>>>>>>>
>>>>>>>>>>>>> I still have to update the OpenJDK wiki to reflect the CR
>>>>>>>>>>>>> changes:
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> This version of the patch has been thru Mach5 tier[1-3]
>>>>>>>>>>>>> testing on
>>>>>>>>>>>>> Oracle's usual set of platforms. Mach5 tier[4-6] is
>>>>>>>>>>>>> running now and
>>>>>>>>>>>>> Mach5 tier[78] will be run later today. My stress kit on
>>>>>>>>>>>>> Solaris-X64
>>>>>>>>>>>>> is running now. Linux-X64 stress testing will start on
>>>>>>>>>>>>> Sunday. I'm
>>>>>>>>>>>>> planning to do Kitchensink runs, SPECjbb2015 runs and my
>>>>>>>>>>>>> monitor
>>>>>>>>>>>>> inflation stress tests on Linux-X64, MacOSX and Solaris-X64.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks, in advance, for any questions, comments or
>>>>>>>>>>>>> suggestions.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Dan
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 3/24/19 9:57 AM, Daniel D. Daugherty wrote:
>>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Welcome to the OpenJDK review thread for my port of
>>>>>>>>>>>>>> Carsten's work on:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> JDK-8153224 Monitor deflation prolong safepoints
>>>>>>>>>>>>>> https://bugs.openjdk.java.net/browse/JDK-8153224
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Here's a link to the OpenJDK wiki that describes my port:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/HotSpot/Async+Monitor+Deflation
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Here's the webrev URL:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://cr.openjdk.java.net/~dcubed/8153224-webrev/3-for-jdk13/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Here's a link to Carsten's original webrev:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://cr.openjdk.java.net/~cvarming/monitor_deflate_conc/0/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Earlier versions of this patch have been through several
>>>>>>>>>>>>>> rounds of
>>>>>>>>>>>>>> preliminary review. Many thanks to Carsten, Coleen,
>>>>>>>>>>>>>> Robbin, and
>>>>>>>>>>>>>> Roman for their preliminary code review comments. A very
>>>>>>>>>>>>>> special
>>>>>>>>>>>>>> thanks to Robbin and Roman for building and testing the
>>>>>>>>>>>>>> patch in
>>>>>>>>>>>>>> their own environments (including specJBB2015).
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This version of the patch has been thru Mach5 tier[1-8]
>>>>>>>>>>>>>> testing on
>>>>>>>>>>>>>> Oracle's usual set of platforms. Earlier versions have
>>>>>>>>>>>>>> been run
>>>>>>>>>>>>>> through my stress kit on my Linux-X64 and Solaris-X64
>>>>>>>>>>>>>> servers
>>>>>>>>>>>>>> (product, fastdebug, slowdebug).Earlier versions have run
>>>>>>>>>>>>>> Kitchensink
>>>>>>>>>>>>>> for 12 hours on MacOSX, Linux-X64 and Solaris-X64
>>>>>>>>>>>>>> (product, fastdebug
>>>>>>>>>>>>>> and slowdebug). Earlier versions have run my monitor
>>>>>>>>>>>>>> inflation stress
>>>>>>>>>>>>>> tests for 12 hours on MacOSX, Linux-X64 and Solaris-X64
>>>>>>>>>>>>>> (product,
>>>>>>>>>>>>>> fastdebug and slowdebug).
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> All of the testing done on earlier versions will be
>>>>>>>>>>>>>> redone on the
>>>>>>>>>>>>>> latest version of the patch.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks, in advance, for any questions, comments or
>>>>>>>>>>>>>> suggestions.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Dan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> P.S.
>>>>>>>>>>>>>> One subtest in
>>>>>>>>>>>>>> gc/g1/humongousObjects/TestHumongousClassLoader.java
>>>>>>>>>>>>>> is currently failing in -Xcomp mode on Win* only. I've
>>>>>>>>>>>>>> been trying
>>>>>>>>>>>>>> to characterize/analyze this failure for more than a week
>>>>>>>>>>>>>> now. At
>>>>>>>>>>>>>> this point I'm convinced that Async Monitor Deflation is
>>>>>>>>>>>>>> aggravating
>>>>>>>>>>>>>> an existing bug. However, I plan to have a better handle
>>>>>>>>>>>>>> on that
>>>>>>>>>>>>>> failure before these bits are pushed to the jdk/jdk repo.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
More information about the hotspot-runtime-dev
mailing list