<AWT Dev> [8] Review request for 8011059 [macosx] Make JDK demos look perfect on retina displays
Alexander Scherbatiy
alexandr.scherbatiy at oracle.com
Wed Nov 13 08:11:16 PST 2013
Could you review the updated fix:
http://cr.openjdk.java.net/~alexsch/8011059/webrev.07/
- The default sun hint is added.
However, it looks the same as the resolution variant ON hint right
now. It would better to leave the behavior on the non HiDPI displays the
same as it was before.
So the resolution variant hint is disabled by default for non
HiDPI displays.
- Resolution variant hints description is updated.
- The logic operator in the isHiDPIImage() method is formatted.
The @2x images are not preloaded in the LWCToolkit. It really can
cause image reloading after moving a window from a display from one
resolution to another.
However, it is not clear during the MultiResolutionImage creation
will the images be used on HiDPI displays or not.
May be there should be a flag that enables the high resolution
images preloading.
The original image can be replaced by the high resolution one in the
paint() method. It causes that the observer could get an image which is
different from the original one.
May be there is no any issue? If a MultiResolutionImage is not used
then all works as before. If a user implements MultiResolutionImage may
be he needs to have an information
about the actual drawn image in the observer even it is different
from the original.
Thanks,
Alexandr.
On 11/12/2013 11:43 PM, Jim Graham wrote:
> Hi Alexander,
>
> Some minor issues with this fix:
>
> - All RenderingHints have a default setting where the system can
> choose for you. The primary thing that the default settings allow is
> for the answer to be based off of another hint. Often the QUALITY
> hint provides the swing vote if an individual hint is left "DEFAULT".
> That should probably also be the setting used for SG2D, and would
> hinge off of the devScale, for example, as the deciding factor.
>
> - Descriptions for "on" and "off" should be something like "Use
> resolution variants of images" and "Use only default resolution
> variants of images" (and "Default resolution variant usage"). Most of
> the other descriptions on hints are statements of what is going to
> happen or what is going to be used rather than a simple 'the X state
> is Y'.
>
> - It looks like the transform is used in SG2D to decide if the hiDPI
> image should be used. I'm not familiar with the Mac's native use of
> @2x, but I thought that they hinged the decision off of the "retina
> scale" of the display, not off of the current transform. That way, if
> you scale down an icon it doesn't change its look when it reaches .5x
> scale (or .75x depending on the cutoff). Personally, I think it is
> better to not use the transform to keep animations smooth, but I'm not
> sure what Apple did.
>
> - The logic in using the transform is also a bit murky. I think if
> you set the scale on a retina display to exactly 1/2 it would use the
> HiDPI version even though the scale was 1:1. Since I support not
> examining the transform there, I'm going to present this as another
> reason why we should just base it on devScale, but the logic could be
> fixed if we really plan to use the transform here.
>
> - The new logic in "isHiDPIImage()" is confusing because you line up
> logic operations from 2 different levels of parentheses. I believe
> that one version of our style guidelines included a rule that allowed
> "indenting to parentheses level" and I would think that would be a
> good rule to apply here. Or do something else to make the logic flow
> there less tricky to read.
>
> - Eventually we are going to need this support in more pipelines. I
> believe that Win8 already has parameters that affect choices of
> images, but they are only currently deployed on the Surface tablets
> (i.e. there are no supported high DPI displays for desktop that I'm
> aware of, but some of the Surface tablets ship with high DPI
> screens). What would the impact be if we moved this into a more
> general class in src/share? I suppose we might spend extra time
> looking for variants of images that we don't need?
>
> - Has any thought been given to the issues that someone raised with
> cursors?
>
> - Has any thought been given to my comments about MediaTracker and
> image observer states for multi-res images? I don't see any attempt
> here to preload the @2x image. The problem would probably only be
> seen on multi-headed systems where one display is retina and one is
> not - you would find the images suddenly reloading when you move the
> window to the other screen and the application might not expect that
> to happen. Which image is the Observer registered on? Since the
> image is handed to the Observer, will an application be surprised when
> their observer gets a handle to an image they've never seen? Is it an
> issue if one of the "alternate resolution variant" images leaks into
> an application's "hands" via the observer callbacks?
>
> ...jim
>
> On 11/11/13 7:59 AM, Alexander Scherbatiy wrote:
>>
>> Could you review the updated fix:
>> http://cr.openjdk.java.net/~alexsch/8011059/webrev.06/
>>
>> Only internal API is exposed:
>> - MultiResolutionImage interface with method
>> "getResolutionVariant(int width, int height)" is added to the
>> com.sun.awt package
>> - Hints to switch on/off the resolution variant usage are added to
>> SunHints class
>> - Test is updated to use the MultiResolutionImage interface
>>
>> Thanks,
>> Alexandr.
>>
>> On 11/5/2013 3:16 PM, Alexander Scherbatiy wrote:
>>>
>>> Thank you for the review.
>>>
>>> Could you look at the updated fix:
>>> http://cr.openjdk.java.net/~alexsch/8011059/webrev.05/
>>>
>>> - URL is parsed to protocol, host, port, and path parts in the
>>> LWCToolkit class.
>>> I checked that URL(protocol, host, port, file) constructor
>>> correctly handles -1 port value.
>>> - Only last file name after last '/' in the URL path is converted
>>> to @2x name
>>> - Tests that check correct URL and path translation to @2x names are
>>> added to the ScalableImageTest
>>>
>>> Thanks,
>>> Alexandr.
>>>
>>>
>>> On 11/1/2013 12:46 AM, Peter Levart wrote:
>>>>
>>>> On 10/29/2013 05:45 PM, Alexander Scherbatiy wrote:
>>>>>> 2. I'm not sure that the proposed getScaledImageName()
>>>>>> implementation in ScalableToolkitImage works perfectly for URLs
>>>>>> like this:
>>>>>>
>>>>>> http://www.exampmle.com/dir/image
>>>>>>
>>>>>> In this case it will try to find 2x image here:
>>>>>>
>>>>>> http://www.example@2x.com/dir/image
>>>>>>
>>>>>> which doesn't look correct.
>>>>> Fixed. Only path part of a URL is converted to path2x.
>>>>
>>>> Hi Alexander,
>>>>
>>>> URLs like this:
>>>>
>>>> http://www.example.com/dir.ext/image
>>>>
>>>> will still be translated to:
>>>>
>>>> http://www.example.com/dir@2x.ext/image
>>>>
>>>>
>>>> I think you need to search for last '.' after the last '/' in the
>>>> getScaledImageName();
>>>>
>>>>
>>>> Also the following code has some additional bugs:
>>>>
>>>> 853 static Image toScalableImage(Image image, URL url) {
>>>> 854
>>>> 855 if (url != null && !url.toString().contains("@2x")
>>>> 856 && !(image instanceof
>>>> ScalableToolkitImage)) {
>>>> 857 String protocol = url.getProtocol();
>>>> 858 String host = url.getHost();
>>>> 859 String file = url.getPath();
>>>> 860 String file2x =*host +*getScaledImageName(file);
>>>> 861 try {
>>>> 862 URL url2x = new URL(protocol, host, file2x);
>>>> 863 url2x.openStream();
>>>> 864 return new ScalableToolkitImage(image,
>>>> getDefaultToolkit().getImage(url2x));
>>>> 865 } catch (Exception ignore) {
>>>> 866 }
>>>> 867 }
>>>> 868 return image;
>>>> 869 }
>>>>
>>>> Why are you prepending *host* to getScaledImageName(file) in line
>>>> 860? Let's take the following URL for example:
>>>>
>>>> http://www.example.com/dir/image.jpg
>>>>
>>>> protocol = "http"
>>>> host = "www.example.com"
>>>> file = "/dir/image.jpg"
>>>> file2x = "*www.example.com*/dir/image at 2x.jpg"
>>>> url2x =
>>>> URL("http://www.example.com*www.example.com*/dir/image@2x.jpg")
>>>>
>>>>
>>>> You are missing a part in URL (de)construction - the optional port!
>>>> For example in the following URL:
>>>>
>>>> http://www.example.com:8080/dir/image.jpg
>>>>
>>>> You should extract the port from original URL and use it in new URL
>>>> construction if present (!= -1).
>>>>
>>>>
>>>> I would also close the stream explicitly after probing for existence
>>>> of resource rather than delegating to GC which might not be promptly
>>>> and can cause resource exhaustion (think of MAX. # of open file
>>>> descriptors):
>>>>
>>>> try (InputStream probe = url.openStream()) {}
>>>>
>>>>
>>>>
>>>> Regards, Peter
>>>>
>>>>
>>>
>>
More information about the macosx-port-dev
mailing list