OpenJFX 1.8 build issues
Anthony Petrov
anthony.petrov at oracle.com
Tue Aug 20 23:36:45 PDT 2013
Hi Dhevendran,
Firstly, the changeset that you're missing in JDK might not be
integrated to the master repo yet, however, it's available in the awt
forest. So instead of http://hg.openjdk.java.net/jdk8/jdk8 you should be
using http://hg.openjdk.java.net/jdk8/awt.
Secondly, you're building the JDK in a somewhat strange way. It's much
easier than that. Just execute the following commands in your Cygwin
command prompt:
$ hg clone http://hg.openjdk.java.net/jdk8/awt myjdk8
$ cd myjdk8
$ bash ./get_source.sh
$ cd ..
$ bash ./configure
$ make
And that's it. Provided you have all the necessary build tools installed
on your system, of course. In most cases you don't need to specify any
options for the configure script (other than 32 vs 64 bits in case you
want to build 32-bit JDK on a 64-bit box). You can find a complete
"how-to" document on building OpenJDK at:
http://hg.openjdk.java.net/jdk8/build/raw-file/tip/README-builds.html
Please let me know if you still have any issues.
--
best regards,
Anthony
On 08/21/2013 08:54 AM, K, Dhevendran (MSDU) wrote:
> Hi Anthony
> Thanks a lot for your answer.
> I also compiled OpenJDK 1.8 source as part of this exercise
> independently . I did the following to compile OpenJDK 1.8
>
> 1. Download OpenJDK 1.8 source and its dependent source
>
> * OpenJDK 1.8 root-source from
> _http://hg.openjdk.java.net/jdk8/jdk8_ àDone
> * OpenJDK 1.8 Lang tools Source from
> _http://hg.openjdk.java.net/jdk8/tl/langtools_ àDone
> * Hotspot 1.8
> Source from_http://hg.openjdk.java.net/jdk8/jdk8/hotspot/rev/e437668ced9d_ àDone
> * Corba 1.8 Source from_http://hg.openjdk.java.net/jdk8/jdk8/corba_
> àDone
> * Jaxp 1.8 Source from_http://hg.openjdk.java.net/jdk8/jdk8/jaxp_ àDone
> * Jaxws 1.8 source from _http://hg.openjdk.java.net/jdk8/jdk8/jaxws_ àDone
> * JDK 1.8 source from _http://hg.openjdk.java.net/jdk8/jdk8/jdk_ àDone
>
> 2. JDK 1.8 Build environment is created after installing following on
> top of *Step-2 *èBuild environment for JKD 1.8 compilation is not
> ready yet as we are not able to find Hotspot the source
>
> * */GnuWin32/* is installed
>
> 3. Building JDK
>
> * */Execute the configure for all the all the add-on packages ( such
> as Corba ,Hotspot … )/*
>
> * ./configure
> --with-override-langtools=../langtools/langtools-4300c2f5fb1b
> --with-override-hotspot=../hotspot/hotspot-e437668ced9d
> --with-override-corba=../corba/corba-d411c60a8c2f
> --with-override-jaxp=../jaxp/jaxp-a22fe9bd01e6
> --with-override-jaxws=../jaxws/jaxws-42211ab0ab1c
> --with-override-jdk=../jdk/jdk-f1d8d15bfcb5 > err.txt 2>&1
>
> * */Execute build /*àThis compilation fails with the following error
>
> * Make clean all
>
> ## Starting jdk
> make[2]: *** No rule to make target
> `/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/build/windows-x86_64-normal-server-release/corba/dist/lib/classes.jar',
> needed by
> `/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/build/windows-x86_64-normal-server-release/jdk/classes/_the.CORBA.classes.imported'.
> Stop.
> make[1]: *** [import-only] Error 2
> make: *** [jdk-only] Error 2
> At this point, I have few questions
>
> * I am not able to compile OpenJDK 1.8 without the “The optional
> Packages” [i.e. Jaxws,Jaxp,Corba,Langtools and JDK ].
> * In the attempt of compilation of these packages , Class not found
> error is thrown pointing the respective source folders
>
> *Is there any place where I can get more stable OpenJDK 1.8 **(with
> JavaFX 1.8 ) ??*
> Awaiting for your response
> Thanks in Advance
> With Warm Regards
> Dhevendran K
> -----Original Message-----
> From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
> Sent: Tuesday, August 20, 2013 8:26 PM
> To: K, Dhevendran (MSDU)
> Cc: openjfx-dev at openjdk.java.net; Thomas, Binoy Samuel (MSDU); Jolapara,
> Vikram Dhirajlal (MSDU)
> Subject: Re: OpenJFX 1.8 build issues
> Hi Dhevendran,
> This is a mismatch of sources between JDK and FX. Try either cloning a
> fresh copy of the FX repo (it's best to always clone both FX and JDK at
> the same time, actually), or building with an older JDK build.
> --
> best regards,
> Anthony
> On 08/20/2013 06:26 PM, K, Dhevendran (MSDU) wrote:
>> Hi
>>
>> I am facing some issue while building OpenJFX 1.8. The link
>>https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX is
>> followed to build on windows. The following steps are perfumed
>>
>>
>> 1. Download the source from :http://hg.openjdk.java.net/openjfx/8/graphics/rt --> Done
>>
>> o The OpenJFX Code is change verify frequently at this site
>>
>>
>>
>> 2. Build environment for OpenJFX is created after doing the following installation ( This is the as per the doc ) --> Done
>>
>> o Cygwin is installed
>>
>> o DirectX SDK June 2010 is installed
>>
>> o Microsoft Visual Studio 10 is installed
>>
>> o Gradle v1.4<http://services.gradle.org/distributions/gradle-1.4-all.zip> is installed
>>
>>
>>
>> 3. Building with Oracle JDK 1.8 binary distribution ==> Build went through with some failure with the following message . However, the jfxrt.jar is created !!
>>
>>
>> ======================================================================
>> ======================
>> :swing:compileJava
>> [ant:javac] C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-3268003fe9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.java:496: error: SwingNode.SwingNodeContent is not abstract and does not override abstract method minimumSizeChanged(int,int) in LightweightContent
>> [ant:javac] private class SwingNodeContent implements LightweightContent {
>> [ant:javac] ^
>> [ant:javac] Note: C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-3268003fe9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.java uses or overrides a deprecated API.
>> [ant:javac] Note: Recompile with -Xlint:deprecation for details.
>> [ant:javac] 1 error
>> :swing:compileJava FAILED
>>
>> FAILURE: Build failed with an exception.
>>
>> * What went wrong:
>> Execution failed for task ':swing:compileJava'.
>>> Compile failed; see the compiler error output for details.
>>
>> * Try:
>> Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output.
>>
>> BUILD FAILED
>> ======================================================================
>> ======================
>>
>> Please let me know whether I am doing some fundamental mistake. Please
>> help me
>>
>>
>> Thanks in Advanve
>>
>> With Warm Regards,
>> Dhevendran K
>>
>>
More information about the openjfx-dev
mailing list