RFR 8207367: 10 vmTestbase/nsk/jdi tests timed out when running with jtreg
serguei.spitsyn at oracle.com
serguei.spitsyn at oracle.com
Wed Feb 27 02:50:15 UTC 2019
Hi Daniil,
It looks good to me.
I have some minor comments though.
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/ClassUnloadRequest/addClassFilter/filter001.java.frames.html
163 if(eventSet != null) {
Space is missed after if
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/EventQueue/remove/remove004.java.frames.html
70 * In first one, second thread waits for any incoming event from the <BR>
71 * debugger which is sleeping for some time; hence, <BR>
72 * no events are expected to be received at the debugger end. <BR>
<BR> is not aligned at 71
While you are at this code, could you, please,
also fix unneeded spaces at the lines? :
516 } catch ( InterruptedException e1) {
...
526 } catch ( Exception e ) {
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/EventQueue/remove/remove004a.java.frames.html
111 Utils.adjustTimeout(argHandler.getWaitTime() * 10000),
112 100,
113 remove004a::log1);
Line 112 is not properly aligned
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/EventQueue/remove_l/remove_l004.java.frames.html
65 * In the first one the first assertion is checked up on as follows: <BR>
66 * the debugger sleeps for some time; <BR>
67 * hence, no event is expected in the debugger within WAITTIME, and <BR>
<BR> at 66 is not aligned
Thank you for catching and fixing the typo at 67!
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose002.java.frames.html
295 }, Utils.adjustTimeout(waitTime * 60000), 1000, dispose002::log3);
A separate line is needed for next wait() argument
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose002a.java.frames.html
128 while(true) { ...
130 if(instruction.equals("check_done")){
131 if (test_thread.isAlive()) {
132 exitCode = FAILED;
133 }
Space is missed after while.
Some logErr("...")for failed case would be useful.
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose003.java.frames.html
260 }, Utils.adjustTimeout(waitTime * 60000), 1000, dispose003::log3);
New line is needed for next wait() argument
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose003a.java.frames.html
129 while(true) {
130 instruction = pipe.readln();
131 if(instruction.equals("check_done")) {
132 if (test_thread.isAlive()) {
133 exitCode = FAILED;
134 }
Space is missed after while and if.
Some logErr("...") for failed casewould be useful.
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose004.java.frames.html
284 }, Utils.adjustTimeout(waitTime * 60000), 1000, dispose004::log3);
New line is needed for next wait() argument
http://cr.openjdk.java.net/~dtitov/8207367/webrev.02/test/hotspot/jtreg/vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose004a.java.frames.html
130 while(true) {
131 instruction = pipe.readln();
132 if(instruction.equals("check_done")) {
133 if (test_thread.isAlive()) {
134 exitCode = FAILED;
135 }
Space is missed after while and if.
Some logErr("...") for failed casewould be useful.
Thanks,
Serguei
On 2/26/19 6:06 PM, Daniil Titov wrote:
> Hi Chris,
>
> Please review a new version of the webrev that slightly changes method receiveEvents(long,pattern) in the following tests:
> -vmTestbase/nsk/jdi/ClassUnloadRequest/addClassExclusionFilter/exclfilter001.java
> -vmTestbase/nsk/jdi/ClassUnloadRequest/addClassFilter/filter001.java)
>
>
> The new changes ensure that receiveEvents(long,pattern) method keeps receiving events in a while loop even if eventSet returned by debugee.VM().eventQueue().remove(waitTime) is a null due to timeout.
>
>
> Bug: https://bugs.openjdk.java.net/browse/JDK-8207367
> Webrev: http://cr.openjdk.java.net/~dtitov/8207367/webrev.02
>
> Thanks!
> -Daniil
>
> On 2/26/19, 11:41 AM, "Chris Plummer" <chris.plummer at oracle.com> wrote:
>
> Ok. I think you mentioned below that default wait time will be 5
> seconds. That seems sufficient to avoid a timeout if there are some
> minor network issues and some packets are lost.
>
> Changes look good.
>
> thanks,
>
> Chris
>
> On 2/26/19 10:01 AM, Daniil Titov wrote:
> > Hi Chris,
> >
> > Yes , it is correct. For example in this particular test the timeout is expected (line 283 expects that breakpoint() returns returnCode3 that is set on line 460 when eventSet on line 456 is null due to a timeout in eventQueue.remove()) and shortening it makes the whole test fit in jtreg time limits.
> >
> > 281 log2(" checking up that the thread2 is not at breakpoint1 because of suspension");
> > 282 expresult = breakpoint();
> > 283 if (expresult != returnCode3) {
> > 284 log3("ERROR: no timeout for waiting for BreakpointEvent when the thread2 is suspended");
> > 285 expresult = returnCode1;
> > 286 break label1;
> > 287 } else
> >
> >
> > 445 private int breakpoint () {
> > 446
> > 447 int returnCode = returnCode0;
> > 448
> > 449 log2(" waiting for BreakpointEvent");
> > 450
> > 451 labelBP:
> > 452 for (;;) {
> > 453
> > 454 log2(" new: eventSet = eventQueue.remove();");
> > 455 try {
> > 456 eventSet = eventQueue.remove (Utils.adjustTimeout(waitTime*1000));
> > 457 if (eventSet == null) {
> > 458 log2(":::::: timeout when waiting for a BreakpintEvent");
> > 459 // log3("ERROR: timeout for waiting for a BreakpintEvent");
> > 460 returnCode = returnCode3;
> > 461 break labelBP;
> > 462 }
> >
> >> And I just noticed the space right after "remove". Can you remove it?
> > Sure. Will do.
> >
> > Thanks!
> > --Daniil
> >
> > On 2/25/19, 7:26 PM, "Chris Plummer" <chris.plummer at oracle.com> wrote:
> >
> > Hi Daniil,
> >
> > For suspend001, are you saying the following is expected to timeout
> > sometimes, so you need a shorter waittime to avoid making the whole test
> > time out?
> >
> > 456 eventSet = eventQueue.remove
> > (Utils.adjustTimeout(waitTime*1000));
> >
> > And I just noticed the space right after "remove". Can you remove it?
> >
> > thanks,
> >
> > Chris
> >
> > On 2/25/19 6:57 PM, Daniil Titov wrote:
> > > Hi Chris,
> > >
> > > The timeout issue mentioned in the bug is about jtreg aborting the tests since they are running longer than the maximum allowed time. That happens since these tests use extreme long internal delays, e.g. a sleep for 5 minutes or a wait for 5 minutes for a case when no events ( and a notify()) are expected. Reducing these internal delays makes the test passing within the default jtreg timeout ( 2 minutes).
> > >
> > > Best regards,
> > > Daniil
> > >
> > > On 2/25/19, 6:15 PM, "Chris Plummer" <chris.plummer at oracle.com> wrote:
> > >
> > > Ok. So how is the timeout issue mentioned in the bug addressed when
> > > there is now a shorter wait time?
> > >
> > > Chris
> > >
> > > On 2/25/19 5:04 PM, Daniil Titov wrote:
> > > > Hi Chris,
> > > >
> > > > Forgot to answer to your another question:
> > > > > > For these 3 tests the event wait timeout was reduced and adjusted for test.timeout.factor:
> > > > > > -vmTestbase/nsk/jdi/Event/_itself_/event001.java
> > > > > > -vmTestbase/nsk/jdi/VirtualMachine/suspend/suspend001/TestDescription.java
> > > > > > -vmTestbase/nsk/jdi/ThreadReference/suspend/suspend001.java
> > > > > So overall is this a shorter or longer waittime now?
> > > >
> > > > Overall this is a shorter waitime now. Instead of 300 seconds it is now 20 seconds for Mach5 jobs (they are run with test.timeout.factor set to 4.0) and 5 seconds for regular jtreg runs.
> > > >
> > > > Best regards,
> > > > Daniil
> > > >
> > > >
> > > > On 2/25/19, 4:38 PM, "Chris Plummer" <chris.plummer at oracle.com> wrote:
> > > >
> > > > Hi Daniil,
> > > >
> > > > Yes, my point was that the max time you wait for a single event is much
> > > > smaller now. I can see a possibility that with a little bit of network
> > > > instability a packet gets lost and resend does not happen fast enough.
> > > >
> > > > thanks,
> > > >
> > > > Chris
> > > >
> > > > On 2/25/19 4:32 PM, Daniil Titov wrote:
> > > > > Hi Chris,
> > > > >
> > > > > The code still waits for the whole total wait time. There is a while loop at lines 163-186 that keeps receiving new events (line 183) till elapsed time is less than the waittime (line 178) or a timeout happens (so eventSet is null).
> > > > >
> > > > > 159 begin = System.currentTimeMillis();
> > > > > 160 eventSet = debugee.VM().eventQueue().remove(waitTime);
> > > > > 161 delta = System.currentTimeMillis() - begin;
> > > > > 162 totalWaitTime -= delta;
> > > > > 163 while (eventSet != null) {
> > > > > 164 EventIterator eventIterator = eventSet.eventIterator();
> > > > >
> > > > > 178 if (totalWaitTime <= 0 || exit) {
> > > > > 179 break;
> > > > > 180 }
> > > > > 181 debugee.resume();
> > > > > 182 begin = System.currentTimeMillis();
> > > > > 183 eventSet = debugee.VM().eventQueue().remove(waitTime);
> > > > > 184 delta = System.currentTimeMillis() - begin;
> > > > > 185 totalWaitTime -= delta;
> > > > > 186 }
> > > > >
> > > > >
> > > > > However, as I see now in case if a timeout happens on line 160 (eventSet is null) the loop is not executed at all. I haven't observed it in test runs but I think it makes sense to adjust this test to take this potential case into account. I will send an updated version of the patch soon.
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Best regards,
> > > > > Daniil
> > > > >
> > > > > On 2/25/19, 12:21 PM, "Chris Plummer" <chris.plummer at oracle.com> wrote:
> > > > >
> > > > > Hi Daniil,
> > > > >
> > > > > On 2/23/19 1:02 PM, Daniil Titov wrote:
> > > > > > Please review the change that fixes timeout issues for the following 10 tests when running with jtreg and default timeout factor (1.0).
> > > > > In Utils.java, I think wait() should be moved right after
> > > > > waitForCondition() and maybe given a more descriptive name. It seems to
> > > > > basically the same as waitForCondition(), except you added a "log"
> > > > > parameter and slightly changed the behavior. Are these behavior
> > > > > differences necessary? Could you share code with the existing
> > > > > waitForCondition()?
> > > > > >
> > > > > > For the following 2 tests the event wait timeout was reduced and adjusted for test.timeout.factor. Method receiveEvents(long,pattern) was fixed to ensure that it gracefully exits after the specified wait period elapsed:
> > > > > > -vmTestbase/nsk/jdi/ClassUnloadRequest/addClassExclusionFilter/exclfilter001.java
> > > > > > -vmTestbase/nsk/jdi/ClassUnloadRequest/addClassFilter/filter001.java
> > > > > 183 eventSet = debugee.VM().eventQueue().remove(waitTime);
> > > > >
> > > > > This code used to wait for the total remaining waittime. Now it waits a
> > > > > fixed amount based on:
> > > > >
> > > > > 153 long waitTime = Utils.adjustTimeout(1000);
> > > > >
> > > > > How did you come up with this wait amount, and is it long enough to deal
> > > > > with occasional hiccups?
> > > > > > For these 3 tests the event wait timeout was reduced and adjusted for test.timeout.factor:
> > > > > > -vmTestbase/nsk/jdi/Event/_itself_/event001.java
> > > > > > -vmTestbase/nsk/jdi/VirtualMachine/suspend/suspend001/TestDescription.java
> > > > > > -vmTestbase/nsk/jdi/ThreadReference/suspend/suspend001.java
> > > > > So overall is this a shorter or longer waittime now?
> > > > > >
> > > > > > For next 2 tests the event wait timeout and the thread sleep time were reduced and adjusted for test.timeout.factor. Additional synchronization between the debugger and the debuggee was added to ensure the debugee process continues as soon as the test finishes the timeout related checks and advances to the next steps:
> > > > > > - vmTestbase/nsk/jdi/EventQueue/remove_l/remove_l004/TestDescription.java
> > > > > > - vmTestbase/nsk/jdi/EventQueue/remove/remove004/TestDescription.java
> > > > > Ok.
> > > > > >
> > > > > > Instead of just sleeping for 5 minutes while waiting for the debuggee test thread to complete the tests now check whether the debuggee thread is alive in the loop. The total waiting timeout was adjusted for test.timeout.factor:
> > > > > > -vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose004/TestDescription.java
> > > > > > -vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose003/TestDescription.java
> > > > > > -vmTestbase/nsk/jdi/VirtualMachine/dispose/dispose002/TestDescription.java
> > > > > Ok.
> > > > >
> > > > > thanks,
> > > > >
> > > > > Chris
> > > > > >
> > > > > > Testing.
> > > > > > The following VM options were used in Mach5 jobs to verify these changes:
> > > > > > 1. No VM args
> > > > > > 2. -XX:+UnlockExperimentalVMOptions -XX:+EnableJVMCI -XX:+TieredCompilation -XX:+UseJVMCICompiler -Djvmci.Compiler=grail
> > > > > > 3. -Xcomp
> > > > > >
> > > > > > Also tier1, tier2 and tier3 Mach5 jobs succeeded.
> > > > > >
> > > > > > To verify that tests succeed with test.timeout.factor set to 1.0 the following patch was used before running Mach5 jobs.
> > > > > >
> > > > > > --- a/make/RunTests.gmk Thu Feb 21 15:17:42 2019 -0800
> > > > > > +++ b/make/RunTests.gmk Thu Feb 21 15:42:15 2019 -0800
> > > > > > @@ -826,6 +826,7 @@
> > > > > > else
> > > > > > JTREG_TIMEOUT_FACTOR ?= 4
> > > > > > endif
> > > > > > + JTREG_TIMEOUT_FACTOR = 1
> > > > > > JTREG_VERBOSE ?= fail,error,summary
> > > > > > JTREG_RETAIN ?= fail,error
> > > > > >
> > > > > > Bug: https://bugs.openjdk.java.net/browse/JDK-8207367
> > > > > > Webrev: http://cr.openjdk.java.net/~dtitov/8207367/webrev.01
> > > > > >
> > > > > > Thanks!
> > > > > > --Daniil
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mail.openjdk.java.net/pipermail/serviceability-dev/attachments/20190226/b2ec3450/attachment-0001.html>
More information about the serviceability-dev
mailing list