<Swing Dev> [15] RFR JDK-8220811: SpinnerNumberModel floating point rounding issue

[Sergey Bylokhov]

I think it should work, the step will counts from the default value.

So currently:
1. if the user set default value to X1 and then he iterates forward 100 times then he will get some X2. During this calculation, he could get "100" rounding issues.
2. If later the user decides iterates backward then most probably he will not get X1, and the amount of possible "rounding issues" will be 200.

If the user will repeat steps 1. and 2. then each time the values will "float".

If we will use counter then in the worst case we will get only two roundings per step: X1+step*100 = X2(if we will use fma we will get only one for every step).

It will not solve all issues but at least will make the iteration "stable".

On 2/17/20 1:59 am, Alexey Ivanov wrote:
> Hi Vlad,
> 
> The idea looks reasonable. However, it does not allow for manual editing. The cases where max and min values are not multiples of step would be hard to handle with this approach. For example: max = 10.05, min = 0.01, step = 0.1; how many ticks are there? What if the user enters 1.01015; the value should change to 1.11015 or 0.91015.
> 
> On 13/02/2020 22:22, Volodin, Vladislav wrote:
>> Hello Sergey, Alexey and Pankaj,
>>
>> I am reading the current discussion and I was thinking about an idea changing the code in the way that instead of working with float/double numbers we work with integer ticks. For example, the model remembers the min/max/step values and calculates a number of steps required to reach from min to max. All increment/decrement actions are done against the current ˋtickˋ value. If the current ˋtickˋ reaches 0 - we return min; if maxTick — we return max. And the current value can be always counted as (min + tick * step) if tick is neither zero, nor max tick count.
>>
>> At least if we deal with integer ticks, but all reading operations calculate on the fly, we will be able to control the representativeness of output.
>>
>> As always, I don’t know all the details and possible consequences, so feel free to ignore my email, if I am wrong.
>>
>> Kind regards,
>> Vlad
>>
>> Sent from myPad
>>
>>> On 13. Feb 2020, at 22:34, Sergey Bylokhov <Sergey.Bylokhov at oracle.com> wrote:
>>>
>>> On 2/12/20 8:21 am, Alexey Ivanov wrote:
>>>> The bug report says that going from -0.15 to -0.10 does not allow going back to -0.15. This happens because the result of this sequence of operations cannot be represented exactly, or, in other words, because of rounding errors; or rather the result is less than the set minimal value.
>>>> Can we set the value of the spinner to the set minimal value instead of disallowing the operation. I mean, after going up the displayed value is -0.10; going down by 0.05 gives the result which is less than the minimal value for the spinner, and thus going down is not allowed. What if we set the value of the spinner to its minimal value instead?
>>> In this case, we will need to update all types including int. Isn't it will be surprised that the spinner will show the value which is not calculated as
>>> "defaultValue + stepValue * stepCount"?
>>>
>>>
>>> -- 
>>> Best regards, Sergey.


-- 
Best regards, Sergey.