No rule to make freetype.dll [WAS: Re: OpenJFX 1.8 build issues]

David Holmes david.holmes at oracle.com
Fri Aug 23 02:34:22 UTC 2013 

What does spec.gmk have for:

FREETYPE2_LIB_PATH

?

David
-----

PS. I wasn't on cc but did get attachments.

On 23/08/2013 5:05 AM, Anthony Petrov wrote:
> [ BCC'ing openjfx-dev@ and CC'ing build-dev@ ]
>
> [ Dhevendran, please subscribe to build-dev@ before posting replies ]
>
> [ Erik, please see below ]
>
> Dhevendran:
> I'm moving this discussion to a more appropriate mailing list to resolve
> all JDK building problems. Now, I've never seen such an error before,
> and I can't find any open bugs about it. You may want to run `make clean
> && make LOG=debug` to get a more comprehensive log. Please make sure you
> keep Erik in CC because the mailing list software strips all
> attachments, so only those listed in CC receive the files.
>
> Erik:
> I've CC'ed you and attached Dhevendran's logs so that you could receive
> them. Do you have any idea what might be causing this error?
>
> --
> best regards,
> Anthony
>
> On 08/22/2013 06:56 PM, K, Dhevendran (MSDU) wrote:
>> Hi Anthony
>> Your suggestion solved that particular issue ( Size of the path is the
>> issue ).  Thanks a lot  for you valuable help
>> Now, I am facing new problem  as shown in the following excerpt . I have
>> attached the  logs
>> =====================================================================================
>>
>> /usr/bin/mkdir -p
>> /cygdrive/c/r/build/windows-x86_64-normal-server-release/jdk/lib/cmm
>> /usr/bin/cp -fP '/cygdrive/c/r/jdk/src/share/lib/cmm/lcms/sRGB.pf'
>> '/cygdrive/c/r/build/windows-x86_64-normal-server-release/jdk/lib/cmm/sRGB.pf'
>>
>> /usr/bin/chmod 444
>> /cygdrive/c/r/build/windows-x86_64-normal-server-release/jdk/lib/cmm/sRGB.pf
>>
>> make[2]: *** No rule to make target `/freetype.dll', needed by
>> `/cygdrive/c/r/build/windows-x86_64-normal-server-release/jdk/bin/freetype.dll'.
>>
>> Stop.
>> make[2]: Leaving directory `/cygdrive/c/r/jdk/makefiles'
>> make[1]: *** [libs-only] Error 2
>> make[1]: Leaving directory `/cygdrive/c/r/jdk/makefiles'
>> make: *** [jdk-only] Error 2
>> =====================================================================================
>>
>> Awaitng for your response
>> Thanks in Advance
>> With Warm Regards
>> Dhevendran K
>> -----Original Message-----
>> From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
>> Sent: Thursday, August 22, 2013 5:25 PM
>> To: K, Dhevendran (MSDU)
>> Cc: Thomas, Binoy Samuel (MSDU); openjfx-dev at openjdk.java.net; Jolapara,
>> Vikram Dhirajlal (MSDU)
>> Subject: Re: OpenJFX 1.8 build issues
>> Hi Dhevendran,
>> It looks like the directory name length is too long. Just for an
>> experiment, do the following:
>> $ mv  /cygdrive/c/dheva/JavaFX_1_8/SR_jdk8  /cygdrive/c/r
>> and then try building from the 'r' directory.
>> I know, this is frustrating, but there's no any good workaround for this
>> issue.
>> BTW, yesterday I've built recent FX repo using JDK8 b103. If this works
>> for you, you may want to try to use an official ea build from this page:
>> http://jdk8.java.net/download.html
>> instead of building your own copy.
>> --
>> best regards,
>> Anthony
>> On 08/22/13 14:33, K, Dhevendran (MSDU) wrote:
>>> Hi Anthony
>>> I ran the JDK 1.8 build with debug mode (i.e. LOG=debug ) as per the
>>> Troubleshooting portion of the help page
>>> _http://hg.openjdk.java.net/jdk8/build/raw-file/tip/README-builds.html
>>> #troubleshooting_ Still, there is no clue what is going wrong Please
>>> let me know if something is missed out *Thanks & Regards* *Dhevendran
>>> K* _____________________________________________
>>> *From:* K, Dhevendran (MSDU)
>>> *Sent:* Thursday, August 22, 2013 10:22 AM
>>> *To:* Anthony Petrov
>>> *Cc:* Thomas, Binoy Samuel (MSDU);openjfx-dev at openjdk.java.net
>>> <mailto:openjfx-dev at openjdk.java.net>;
>>> Jolapara, Vikram Dhirajlal (MSDU)
>>> *Subject:* RE: OpenJFX 1.8 build issues Hi Anthony I would like the
>>> right error message once again " Error: Could not find or load main
>>> class com.sun.tools.javac.Main" as shown in the following message
>>> excerpt ====== Right excerpt of the error message ===== zip -q
>>> sawindbg.diz sawindbg.map sawindbg.pdb rm -f sawindbg.map sawindbg.pdb
>>> No docs () for windows
>>> INFO: ENABLE_FULL_DEBUG_SYMBOLS=1
>>> ## Finished hotspot (build time 00:15:04) ## Starting corba Compiling
>>> 6 files for BUILD_LOGUTIL
>>> Error: Could not find or load main class com.sun.tools.javac.Main ß
>>> This is the issue.
>>> ## Finished corba (build time 00:00:12) ## Starting jaxp ## Finished
>>> jaxp (build time 00:00:08) ## Starting jaxws ## Finished jaxws (build
>>> time 00:00:28) ## Starting jdk
>>> make[2]: *** No rule to make target
>>> `/cygdrive/c/dheva/JavaFX_1_8/SR_jdk8/build/windows-x86_64-normal-serv
>>> er-release/corba/dist/lib/classes.jar',
>>> needed by
>>> `/cygdrive/c/dheva/JavaFX_1_8/SR_jdk8/build/windows-x86_64-normal-server-release/jdk/classes/_the.CORBA.classes.imported'.
>>>
>>> Stop.
>>> make[1]: *** [import-only] Error 2
>>> make: *** [jdk-only] Error 2
>>> ====== Right excerpt of the error message ===== Am I missing something
>>> here ?
>>> Thanks & Regards
>>> Dhevendran K
>>> -----Original Message-----
>>> From:_openjfx-dev-bounces at openjdk.java.net_
>> <mailto:_openjfx-dev-bounces at openjdk.java.net_>
>>> <mailto:openjfx-dev-bounces at openjdk.java.net>
>>> [_mailto:openjfx-dev-bounces at openjdk.java.net_] On Behalf Of K,
>>> Dhevendran (MSDU)
>>> Sent: Thursday, August 22, 2013 8:52 AM
>>> To: Anthony Petrov
>>> Cc: Thomas, Binoy Samuel (MSDU);_openjfx-dev at openjdk.java.net_
>>> <mailto:_openjfx-dev at openjdk.java.net_>
>>> <mailto:openjfx-dev at openjdk.java.net>; Jolapara, Vikram Dhirajlal
>>> (MSDU)
>>> Subject: RE: OpenJFX 1.8 build issues
>>> Hi Anthony
>>> With restart, the get_source.sh has passed successfully The configure
>>> is also passed Now the make files ============================== ##
>>> Starting jaxws ## Finished jaxws (build time 00:00:28) ## Starting jdk
>>> make[2]: *** No rule to make target
>>> `/cygdrive/c/dheva/JavaFX_1_8/SR_jdk8/build/windows-x86_64-normal-serv
>>> er-release/corba/dist/lib/classes.jar',
>>> needed by
>>> `/cygdrive/c/dheva/JavaFX_1_8/SR_jdk8/build/windows-x86_64-normal-server-release/jdk/classes/_the.CORBA.classes.imported'.
>>>
>>> Stop.
>>> make[1]: *** [import-only] Error 2
>>> make: *** [jdk-only] Error 2
>>> ==============================
>>> Please provide your suggestion
>>> Thanks & Regards
>>> Dhevendran K
>>> -----Original Message-----
>>> From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
>>> Sent: Wednesday, August 21, 2013 8:42 PM
>>> To: K, Dhevendran (MSDU)
>>> Cc: Thomas, Binoy Samuel (MSDU);openjfx-dev at openjdk.java.net
>>> <mailto:openjfx-dev at openjdk.java.net>
>>> <mailto:openjfx-dev at openjdk.java.net>; Jolapara, Vikram Dhirajlal
>>> (MSDU)
>>> Subject: Re: OpenJFX 1.8 build issues
>>> Some people reported it took only 5 minutes for them. For me this
>>> usually takes about 30 minutes. Anything longer than 1 hour looks very
>>> suspicious. Also, you may notice that hg clone for the nashorn repo
>>> failed for some reason.
>>> I believe this indicates some sort of a network issue. Please try
>>> re-running the get_source.sh script again and/or clone a new myjdk8
>>> and run the get_source.sh in this fresh clone.
>>> --
>>> best regards,
>>> Anthony
>>> On 08/21/2013 07:03 PM, K, Dhevendran (MSDU) wrote:
>>>>  Hi Anthony
>>>>  Thanks for the information
>>>>  I am very curious to know the usual time taken to complete the
>>>> operation of the command */"/**/bash ./get_source.sh/**/"/* execution
>>>> over Internet Please note that the execution of the command " bash
>>> ./get_source.sh"
>>>>  was showing the following message for *more than 5 hours* $ bash
>>>> ./get_source.sh # Repositories: corba jaxp jaxws langtools jdk
>>>> hotspot nashorn
>>>>  corba: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/corba corba
>>>>  jaxp: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/jaxp jaxp Waiting 5 secs before
>>>> spawning next background command.
>>>>  corba: requesting all changes
>>>>  corba: adding changesets
>>>>  jaxws: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/jaxws jaxws
>>>>  corba: adding manifests
>>>>  langtools: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/langtools langtools
>>>>  corba: adding file changes
>>>>  jaxp: requesting all changes
>>>>  Waiting 5 secs before spawning next background command.
>>>>  jaxws: requesting all changes
>>>>  jaxp: adding changesets
>>>>  jaxws: adding changesets
>>>>  jdk: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/jdk jdk
>>>>  langtools: requesting all changes
>>>>  hotspot: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/hotspot hotspot
>>>>  langtools: adding changesets
>>>>  Waiting 5 secs before spawning next background command.
>>>>  jdk: requesting all changes
>>>>  jdk: adding changesets
>>>>  ./common/bin/hgforest.sh: line 201: inate: command not found
>>>>  nashorn: /bin/python -u /usr/bin/hg clone
>>>> http://hg.openjdk.java.net/jdk8/awt/nashorn nashorn
>>>>  cat: /tmp/forest.4608/*.pid.rc: No such file or directory
>>>>  WARNING: /tmp/forest.4608/*.pid.rc exited abnormally.
>>>>  hotspot: requesting all changes
>>>>  nashorn: requesting all changes
>>>>  jaxws: adding manifests
>>>>  hotspot: adding changesets
>>>>  nashorn: adding changesets
>>>>  nashorn: adding manifests
>>>>  jaxp: adding manifests
>>>>  nashorn: adding file changes
>>>>  langtools: adding manifests
>>>>  jaxws: adding file changes
>>>>  jaxp: adding file changes
>>>>  hotspot: adding manifests
>>>>  jdk: adding manifests
>>>>  langtools: adding file changes
>>>>  corba: added 495 changesets with 3466 changes to 1386  files
>>>>  corba: updating to branch default
>>>>  corba: 1340 files updated, 0 files merged, 0 files  removed, 0 files
>>>> unresolved
>>>>  nashorn: added 485 changesets with 5125 changes to 1859  files
>>>>  nashorn: updating to branch default
>>>>  nashorn: 1755 files updated, 0 files merged, 0 files  removed, 0
>>>> files unresolved
>>>>  langtools: added 1937 changesets with 19074 changes to
>>>>  6603 files
>>>>  langtools: updating to branch default
>>>>  langtools: 5878 files updated, 0 files merged, 0 files  removed, 0
>>>> files unresolved
>>>>  jaxws: added 393 changesets with 11830 changes to
>>>>  6699 files
>>>>  jaxws: updating to branch default
>>>>  hotspot: adding file changes
>>>>  jaxws: 3686 files updated, 0 files merged, 0 files  removed, 0 files
>>>> unresolved
>>>>  jaxp: added 474 changesets with 5942 changes to 4223  files
>>>>  jaxp: updating to branch default
>>>>  jaxp: 2075 files updated, 0 files merged, 0 files  removed, 0 files
>>>> unresolved
>>>>  hotspot: added 5059 changesets with 31931 changes to
>>>>  4864 files
>>>>  hotspot: updating to branch default
>>>>  hotspot: 4014 files updated, 0 files merged, 0 files  removed, 0
>>>> files unresolved  Please let me know whether there is short-cut to
>>>> get all the OpenJDK
>>>>  1.8 source and its corresponding JavaFX code Thanks in Advance
>>>> Thanks  & Regards Dhevendran K -----Original Message-----
>>>>  From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
>>>>  Sent: Wednesday, August 21, 2013 3:24 PM
>>>>  To: K, Dhevendran (MSDU)
>>>>  Cc: Thomas, Binoy Samuel (MSDU);
>>>> openjfx-dev at openjdk.java.net<mailto:openjfx-dev at openjdk.java.net
>> <mailto:openjfx-dev at openjdk.java.net<mailto:openjfx-dev at openjdk.java.net>
>>> <mailto:openjfx-dev at openjdk.java.net<mailto:openjfx-dev at openjdk.java.n
>>> et>>;
>>>>  Jolapara, Vikram Dhirajlal (MSDU)
>>>>  Subject: Re: OpenJFX 1.8 build issues  I'd go with the Graphics
>>>> forest for OpenJFX:
>>>>  $ hg clonehttp://hg.openjdk.java.net/openjfx/8/graphics myfx8 $ cd
>>>>  myfx8 $ hg clonehttp://hg.openjdk.java.net/openjfx/8/graphics/rt
>>>>  $ cd rt
>>>>  $ JAVA_HOME=<path-to-jdk8> JDK_HOME=<path-to-jdk8> gradle This
>>>> should  build the OpenJFX for you. The <path-to-jdk8> should point to
>>>> a  directory where you've just built your OpenJDK in (specifically,
>>>> the  sdk (and not jre) image directory somewhere below the
>>>> myjdk8/build/<config>/ - you should run `make images` after the
>>>> ordinary `make` completes for your OpenJDK in order to generate the
>>> sdk image).
>>>>  --
>>>>  best regards,
>>>>  Anthony
>>>>  On 08/21/2013 01:31 PM, K, Dhevendran (MSDU) wrote:
>>>> > Hi Anthony
>>>> > Thanks Anthony for the detailed information. Can you also provide
>>>> > me the corresponding JavaFX source
>>>> > Note:- I was able to succeed the following steps
>>>> >
>>>> > * hg clone _http://hg.openjdk.java.net/jdk8/awt myjdk8_ → done
>>>> > * bash
>>>> > ./get_source.sh
>>>> > → In Progress
>>>> >
>>>> > Please share the corresponding JavaFX source Thanks in Advance With
>>>> > Warm Regards Dhevendran K -----Original Message-----
>>>> > From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
>>>> > Sent: Wednesday, August 21, 2013 1:00 PM
>>>> > To: K, Dhevendran (MSDU)
>>>> > Cc: Thomas, Binoy Samuel (MSDU);openjfx-dev at openjdk.java.net
>>>> > <mailto:openjfx-dev at openjdk.java.net>;
>>>> > Jolapara, Vikram Dhirajlal (MSDU)
>>>> > Subject: Re: OpenJFX 1.8 build issues On 08/21/2013 10:36 AM,
>>>> > Anthony Petrov wrote:
>>>> >> Secondly, you're building the JDK in a somewhat strange way. It's
>>>> >> much easier than that. Just execute the following commands in your
>>>> >> Cygwin command prompt:
>>>> >>
>>>> >> $ hg clonehttp://hg.openjdk.java.net/jdk8/awt myjdk8 $ cd myjdk8 $
>>>> >> bash ./get_source.sh $ cd ..
>>>> > A small correction: you don't need this "cd ..". You want to stay
>>>> > in the
>>>> > myjdk8 directory when running configure/make.
>>>> > --
>>>> > best regards,
>>>> > Anthony
>>>> >> $ bash ./configure
>>>> >> $ make
>>>> >>
>>>> >> And that's it. Provided you have all the necessary build tools
>>>> >> installed on your system, of course. In most cases you don't need
>>>> >> to specify any options for the configure script (other than 32 vs
>>>> >> 64 bits in case you want to build 32-bit JDK on a 64-bit box). You
>>>> >> can find a complete "how-to" document on building OpenJDK at:
>>>> >>
>>>> >>http://hg.openjdk.java.net/jdk8/build/raw-file/tip/README-builds.ht
>>>> >>ml
>>>> >>
>>>> >> Please let me know if you still have any issues.
>>>> >>
>>>> >> --
>>>> >> best regards,
>>>> >> Anthony
>>>> >>
>>>> >> On 08/21/2013 08:54 AM, K, Dhevendran (MSDU) wrote:
>>>> >>> Hi Anthony
>>>> >>> Thanks a lot for your answer.
>>>> >>> I also compiled OpenJDK 1.8 source as part of this exercise
>>>> >>> independently . I did the following to compile OpenJDK 1.8
>>>> >>>
>>>> >>> 1. Download OpenJDK 1.8 source and its dependent source
>>>> >>>
>>>> >>> * OpenJDK 1.8 root-source from
>>>> >>> _http://hg.openjdk.java.net/jdk8/jdk8_ àDone
>>>> >>> * OpenJDK 1.8 Lang tools Source from
>>>> >>> _http://hg.openjdk.java.net/jdk8/tl/langtools_ àDone
>>>> >>> * Hotspot 1.8
>>>> >>> Source
>>>> >>> from_http://hg.openjdk.java.net/jdk8/jdk8/hotspot/rev/e437668ced9
>>>> >>> d_
>>> àDone
>>>> >>> * Corba 1.8 Source
>>>> >>> from_http://hg.openjdk.java.net/jdk8/jdk8/corba_
>>>> >>> àDone
>>>> >>> * Jaxp 1.8 Source
>>>> >>> from_http://hg.openjdk.java.net/jdk8/jdk8/jaxp_
>>>> >>> àDone
>>>> >>> * Jaxws 1.8 source from
>>>> >>> _http://hg.openjdk.java.net/jdk8/jdk8/jaxws_
>>>> >>> àDone
>>>> >>> * JDK 1.8 source from _http://hg.openjdk.java.net/jdk8/jdk8/jdk_
>>>> >>> àDone
>>>> >>>
>>>> >>> 2. JDK 1.8 Build environment is created after installing
>>>> >>> following on top of *Step-2 *èBuild environment for JKD 1.8
>>>> >>> compilation is not ready yet as we are not able to find Hotspot
>>>> >>> the source
>>>> >>>
>>>> >>> * */GnuWin32/* is installed
>>>> >>>
>>>> >>> 3. Building JDK
>>>> >>>
>>>> >>> * */Execute the configure for all the all the add-on packages (
>>>> >>> such as Corba ,Hotspot … )/*
>>>> >>>
>>>> >>> * ./configure
>>>> >>> --with-override-langtools=../langtools/langtools-4300c2f5fb1b
>>>> >>> --with-override-hotspot=../hotspot/hotspot-e437668ced9d
>>>> >>> --with-override-corba=../corba/corba-d411c60a8c2f
>>>> >>> --with-override-jaxp=../jaxp/jaxp-a22fe9bd01e6
>>>> >>> --with-override-jaxws=../jaxws/jaxws-42211ab0ab1c
>>>> >>> --with-override-jdk=../jdk/jdk-f1d8d15bfcb5 > err.txt 2>&1
>>>> >>>
>>>> >>> * */Execute build /*àThis compilation fails with the following
>>>> >>> error
>>>> >>>
>>>> >>> * Make clean all
>>>> >>>
>>>> >>> ## Starting jdk
>>>> >>> make[2]: *** No rule to make target
>>>> >>> `/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/buil
>>>> >>> d/ w i
>>>> >>> ndows-x86_64-normal-server-release/corba/dist/lib/classes.jar',
>>>> >>>
>>>> >>> needed by
>>>> >>>
>>> `/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/build/windows-x86_64-normal-server-release/jdk/classes/_the.CORBA.classes.imported'.
>>>
>>>> >>>
>>>> >>> Stop.
>>>> >>> make[1]: *** [import-only] Error 2
>>>> >>> make: *** [jdk-only] Error 2
>>>> >>> At this point, I have few questions
>>>> >>>
>>>> >>> * I am not able to compile OpenJDK 1.8 without the “The optional
>>>> >>> Packages” [i.e. Jaxws,Jaxp,Corba,Langtools and JDK ].
>>>> >>> * In the attempt of compilation of these packages , Class not
>>>> >>> found error is thrown pointing the respective source folders
>>>> >>>
>>>> >>> *Is there any place where I can get more stable OpenJDK 1.8
>>>> >>> **(with JavaFX 1.8 ) ??* Awaiting for your response Thanks in
>>>> >>> Advance With Warm Regards Dhevendran K -----Original Message-----
>>>> >>> From: Anthony Petrov [mailto:anthony.petrov at oracle.com]
>>>> >>> Sent: Tuesday, August 20, 2013 8:26 PM
>>>> >>> To: K, Dhevendran (MSDU)
>>>> >>> Cc:openjfx-dev at openjdk.java.net
>>>> >>> <mailto:openjfx-dev at openjdk.java.net>;
>>>> > Thomas, Binoy Samuel (MSDU);
>>>> >>> Jolapara, Vikram Dhirajlal (MSDU)
>>>> >>> Subject: Re: OpenJFX 1.8 build issues Hi Dhevendran, This is a
>>>> >>> mismatch of sources between JDK and FX. Try either cloning a
>>>> >>> fresh copy of the FX repo (it's best to always clone both FX and
>>>> >>> JDK at the same time, actually), or building with an older JDK
>>>> build.
>>>> >>> --
>>>> >>> best regards,
>>>> >>> Anthony
>>>> >>> On 08/20/2013 06:26 PM, K, Dhevendran (MSDU) wrote:
>>>> >>>> Hi
>>>> >>>>
>>>> >>>> I am facing some issue while building OpenJFX 1.8. The link
>>>> >>>>https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX
>>> <https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX> is
>>>> >>>>followed to build on windows. The following steps are perfumed
>>>> >>>>
>>>> >>>>
>>>> >>>> 1. Download the source from
>>>> >>>> :http://hg.openjdk.java.net/openjfx/8/graphics/rt --> Done
>>>> >>>>
>>>> >>>> o The OpenJFX Code is change verify frequently at this site
>>>> >>>>
>>>> >>>>
>>>> >>>>
>>>> >>>> 2. Build environment for OpenJFX is created after doing the
>>>> >>>> following installation ( This is the as per the doc ) --> Done
>>>> >>>>
>>>> >>>> o Cygwin is installed
>>>> >>>>
>>>> >>>> o DirectX SDK June 2010 is installed
>>>> >>>>
>>>> >>>> o Microsoft Visual Studio 10 is installed
>>>> >>>>
>>>> >>>> o Gradle
>>>> >>>> v1.4<http://services.gradle.org/distributions/gradle-1.4-all.zip
>>>> >>>> >
>>>> >>>> is installed
>>>> >>>>
>>>> >>>>
>>>> >>>>
>>>> >>>> 3. Building with Oracle JDK 1.8 binary distribution ==> Build
>>>> >>>> went through with some failure with the following message .
>>>> >>>> However, the jfxrt.jar is created !!
>>>> >>>>
>>>> >>>>
>>>> >>>> ================================================================
>>>> >>>> ==
>>>> >>>> =
>>>> >>>> =
>>>> >>>> ==
>>>> >>>> ======================
>>>> >>>> :swing:compileJava
>>>> >>>> [ant:javac]
>>>> >>>>
>>> C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-3268003fe9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.java:496:
>>>
>>>> >>>> error: SwingNode.SwingNodeContent is not abstract and does not
>>>> >>>> override abstract method minimumSizeChanged(int,int) in
>>>> >>>> LightweightContent [ant:javac] private class SwingNodeContent
>>>> >>>> implements LightweightContent { [ant:javac] ^ [ant:javac] Note:
>>>> >>>> C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-32680
>>>> >>>> 03
>>>> >>>> f e
>>>> >>>> 9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.jav
>>>> >>>> a uses or overrides a deprecated API.
>>>> >>>> [ant:javac] Note: Recompile with -Xlint:deprecation for details.
>>>> >>>> [ant:javac] 1 error
>>>> >>>> :swing:compileJava FAILED
>>>> >>>>
>>>> >>>> FAILURE: Build failed with an exception.
>>>> >>>>
>>>> >>>> * What went wrong:
>>>> >>>> Execution failed for task ':swing:compileJava'.
>>>> >>>>> Compile failed; see the compiler error output for details.
>>>> >>>>
>>>> >>>> * Try:
>>>> >>>> Run with --stacktrace option to get the stack trace. Run with
>>>> >>>> --info or --debug option to get more log output.
>>>> >>>>
>>>> >>>> BUILD FAILED
>>>> >>>> ================================================================
>>>> >>>> ==
>>>> >>>> =
>>>> >>>> =
>>>> >>>> ==
>>>> >>>> ======================
>>>> >>>>
>>>> >>>> Please let me know whether I am doing some fundamental mistake.
>>>> >>>> Please help me
>>>> >>>>
>>>> >>>>
>>>> >>>> Thanks in Advanve
>>>> >>>>
>>>> >>>> With Warm Regards,
>>>> >>>> Dhevendran K
>>>> >>>>
>>>> >>>>

More information about the build-dev mailing list