RFR(S): 8213698: Improve devkit creation and add support for linux/ppc64/ppc64le/s390x
Volker Simonis
volker.simonis at gmail.com
Thu Nov 15 16:17:15 UTC 2018
Hi Erik,
thanks for looking at my changes (and providing some history, which is
always interesting) Can I consider your answer a review from your
site? I'd like to wait for Magnus to double check my patch but it's
definitely good to know if you're fine with my changes :)
Thank you and best regards,
Volker
On Tue, Nov 13, 2018 at 6:34 PM Erik Joelsson <erik.joelsson at oracle.com> wrote:
>
> Hello Volker,
>
> I think your changes look reasonable and I'm happy to see some external
> interest in the devkits!
>
> To provide some history on the structure of these makefiles. They used
> to support building full cross toolchains from and to all listed
> platforms (creating one mega kit for each host platform with all the
> others as targets), which was also the default behavior. Since we
> weren't using this, I simplified it a bit. I think your design with
> base-to-target directories makes more sense. You get separate kits for
> each base and target combination, which is how we use them in practice
> anyway.
>
> The presence of a top level dir in the tars is something I have debated
> with myself a lot. The different devkit scripts aren't even behaving the
> same in this regard. I agree that it's cleaner with a top level dir, but
> in the world of automated installs, it adds yet another level of
> directories to already deep paths. I'm ok with changing it however.
>
> /Erik
>
> On 2018-11-13 08:25, Volker Simonis wrote:
> > As it seems that nobody has looked at this until now, I take the
> > liberty to slightly update my proposal :)
> >
> > http://cr.openjdk.java.net/~simonis/webrevs/2018/8213698.v1/
> >
> > - add the Fedora version to the sub-directory under
> > build/devkit/download/rpms/ which contains the target specific .rpm
> > files. This saves a lot of time if experimenting with various sysroot
> > versions:
> >
> > endif
> > - LINUX_VERSION := Fedora $(BASE_OS_VERSION)
> > + LINUX_VERSION := Fedora_$(BASE_OS_VERSION)
> > else
> > DOWNLOAD := $(OUTPUT_ROOT)/download
> > -DOWNLOAD_RPMS := $(DOWNLOAD)/rpms/$(TARGET)
> > +DOWNLOAD_RPMS := $(DOWNLOAD)/rpms/$(TARGET)-$(LINUX_VERSION)
> > SRCDIR := $(OUTPUT_ROOT)/src
> >
> > - remove "unknown" from the host platform triplet. According to the
> > "Autobook, §3.4 Configuration Names" [1] "..it is normally not
> > necessary to specify an entire name. In particular, the middle field
> > (manufacturer - which defaults to "unknown") is often omitted."
> >
> > # Figure out what platform this is building on.
> > -me := $(cpu)-$(if $(findstring Linux,$(os)),unknown-linux-gnu)
> > +me := $(cpu)-$(if $(findstring Linux,$(os)),linux-gnu)
> >
> > Thank you and best regards,
> > Volker
> >
> > [1] https://sourceware.org/autobook/autobook/autobook_17.html
> > On Mon, Nov 12, 2018 at 12:19 PM Volker Simonis
> > <volker.simonis at gmail.com> wrote:
> >> Hi,
> >>
> >> can I please have a review for the following change which ads support
> >> for linux/ppc64/ppc64le/s390x devkits and hopefully improves the
> >> creation of devkits a little bit :)
> >>
> >> http://cr.openjdk.java.net/~simonis/webrevs/2018/8213698/
> >> https://bugs.openjdk.java.net/browse/JDK-8213698
> >>
> >> With these changes it becomes possible to say any of the following:
> >>
> >> make cross_compile_target="ppc64le-linux-gnu s390x-linux-gnu" BASE_OS=Fedora
> >> make cross_compile_target="ppc64-linux-gnu" BASE_OS=Fedora BASE_OS_VERSION=17
> >> make onlytars cross_compile_target="ppc64-linux-gnu ppc64le-linux-gnu
> >> s390x-linux-gnu"
> >>
> >> and get the following devkits under "build/devkit/result":
> >>
> >> sdk-x86_64-unknown-linux-gnu-to-ppc64le-linux-gnu-20181112.tar.gz
> >> sdk-x86_64-unknown-linux-gnu-to-ppc64-linux-gnu-20181112.tar.gz
> >> sdk-x86_64-unknown-linux-gnu-to-s390x-linux-gnu-20181112.tar.gz
> >> x86_64-unknown-linux-gnu-to-ppc64le-linux-gnu/
> >> x86_64-unknown-linux-gnu-to-ppc64-linux-gnu/
> >> x86_64-unknown-linux-gnu-to-s390x-linux-gnu/
> >>
> >> Below you can find a more detailed description of the various changes.
> >> Once we've discussed and agreed on the changes I'd like to add a small
> >> documentation about how to build and use devkits to
> >> "doc/building.{md,html}" which describes the creation and usage of
> >> devkits. This documentation should be right at the top of the
> >> "Cross-compiling" section which is quite complex now. It was not clear
> >> to me until yet how trivial the creation and usage of a devkit can be
> >> :)
> >>
> >>
> >> - The changes required for supporting linux/ppc64/ppc64le/s390x are trivial:
> >>
> >> make/devkit/Tools.gmk
> >>
> >> +ifneq ($(filter ppc64 ppc64le s390x, $(ARCH)), )
> >> + # We only support 64-bit on these platforms anyway
> >> + CONFIG += --disable-multilib
> >> +endif
> >>
> >> This is required to prevent building of multilib toolchains which
> >> arent't needed anyway. The problem with the multilib toolchain build
> >> is that it requires some special 32-bit headers which arn't installed
> >> by default from the current RPM list.
> >>
> >> - The following change allows users to choose the version of Fedora
> >> which is used to create the sysroot environment by setting
> >> "BASE_OS_VERSION" (with "27" being the default). This works "BASE_OS"
> >> will be set to "Fedora" (as opposed to "Fedora27" before). Notice that
> >> older Fedora versions have a sligthly different download URL:
> >>
> >> make/devkit/Tools.gmk
> >>
> >> ifeq ($(BASE_OS), OEL6)
> >> OEL_URL := http://yum.oracle.com/repo/OracleLinux/OL6/4/base/$(ARCH)/
> >> LINUX_VERSION := OEL6.4
> >> -else ifeq ($(BASE_OS), Fedora27)
> >> - ifeq ($(ARCH), aarch64)
> >> +else ifeq ($(BASE_OS), Fedora)
> >> + DEFAULT_OS_VERSION := 27
> >> + ifeq ($(BASE_OS_VERSION), )
> >> + BASE_OS_VERSION := $(DEFAULT_OS_VERSION)
> >> + endif
> >> + ifeq ($(filter x86_64 armhfp, $(ARCH)), )
> >> FEDORA_TYPE=fedora-secondary
> >> else
> >> FEDORA_TYPE=fedora/linux
> >> endif
> >> - OEL_URL := https://dl.fedoraproject.org/pub/$(FEDORA_TYPE)/releases/27/Everything/$(ARCH)/os/Packages/
> >> - LINUX_VERSION := Fedora 27
> >> + ARCHIVED := $(shell [ $(BASE_OS_VERSION) -lt $(DEFAULT_OS_VERSION)
> >> ] && echo true)
> >> + ifeq ($(ARCHIVED),true)
> >> + OEL_URL :=
> >> https://archives.fedoraproject.org/pub/archive/$(FEDORA_TYPE)/releases/$(BASE_OS_VERSION)/Everything/$(ARCH)/os/Packages/
> >> + else
> >> + OEL_URL :=
> >> https://dl.fedoraproject.org/pub/$(FEDORA_TYPE)/releases/$(BASE_OS_VERSION)/Everything/$(ARCH)/os/Packages/
> >> + endif
> >> + LINUX_VERSION := Fedora $(BASE_OS_VERSION)
> >> else
> >> $(error Unknown base OS $(BASE_OS))
> >> endif
> >>
> >> - Enable the creation of several different devkits at once (e.g. 'make
> >> cross_compile_target="ppc64-linux-gnu ppc64le-linux-gnu
> >> s390x-linux-gnu"') or one after another but all into the same
> >> 'build/devkit/result' directory. The result directory will contain
> >> $HOST-to-$TARGET sub-directories with the corresponding devkits:
> >>
> >> make/devkit/Makefile
> >>
> >> -submakevars = HOST=$@ BUILD=$(me) \
> >> - RESULT=$(RESULT) PREFIX=$(RESULT)/$@ \
> >> - OUTPUT_ROOT=$(OUTPUT_ROOT)
> >> +submakevars = HOST=$@ BUILD=$(me) RESULT=$(RESULT) OUTPUT_ROOT=$(OUTPUT_ROOT)
> >> +
> >> $(host_platforms) :
> >> @echo 'Building compilers for $@'
> >> @echo 'Targets: $(target_platforms)'
> >> for p in $(filter $@, $(target_platforms)) $(filter-out $@,
> >> $(target_platforms)); do \
> >> - $(MAKE) -f Tools.gmk download-rpms $(submakevars) TARGET=$$p && \
> >> + $(MAKE) -f Tools.gmk download-rpms $(submakevars) \
> >> + TARGET=$$p PREFIX=$(RESULT)/$@-to-$$p && \
> >> $(MAKE) -f Tools.gmk all $(submakevars) \
> >> - TARGET=$$p || exit 1 ; \
> >> + TARGET=$$p PREFIX=$(RESULT)/$@-to-$$p && \
> >> + $(MAKE) -f Tools.gmk ccache $(submakevars) \
> >> + TARGET=$@ PREFIX=$(RESULT)/$@-to-$$p
> >> BUILDDIR=$(OUTPUT_ROOT)/$@/$$p || exit 1 ; \
> >> done
> >> - @echo 'Building ccache program for $@'
> >> - $(MAKE) -f Tools.gmk ccache $(submakevars) TARGET=$@
> >> @echo 'All done"'
> >>
> >> Notice that we have to build "ccache" for each target because ccache
> >> will be installed into the directory specified by "--prefix" at
> >> configure time and this is now different for every target. However
> >> that's not a big problem, because the time for compiling ccache is
> >> negligible compared to the download time of the RPMs and the build
> >> time of GCC.
> >>
> >> define Mktar
> >> - $(1)_tar = $$(RESULT)/sdk-$(1)-$$(today).tar.gz
> >> - $$($(1)_tar) : PLATFORM = $(1)
> >> - TARFILES += $$($(1)_tar)
> >> - $$($(1)_tar) : $(1) $$(shell find $$(RESULT)/$(1))
> >> + $(1)-to-$(2)_tar = $$(RESULT)/sdk-$(1)-to-$(2)-$$(today).tar.gz
> >> + $$($(1)-to-$(2)_tar) : PLATFORM = $(1)-to-$(2)
> >> + TARFILES += $$($(1)-to-$(2)_tar)
> >> + $$($(1)-to-$(2)_tar) : $$(shell find $$(RESULT)/$(1)-to-$(2) -type f)
> >> endef
> >>
> >> -$(foreach p,$(host_platforms),$(eval $(call Mktar,$(p))))
> >> +$(foreach p,$(host_platforms),$(foreach t,$(target_platforms),$(eval
> >> $(call Mktar,$(p),$(t)))))
> >>
> >> make/devkit/Tools.gmk
> >>
> >> -PATHEXT = $(RESULT)/$(BUILD)/bin:
> >> +PATHEXT = $(PREFIX)/bin:
> >>
> >>
> >> - Various small cleanups
> >>
> >> make/devkit/Tools.gmk
> >>
> >> - Don't set "RESULT" and "PREFIX" in Tools.gmk because the values are
> >> overridden by the settings in the calling Makefile anyway:
> >>
> >> # Define directories
> >> -RESULT := $(OUTPUT_ROOT)/result
> >> BUILDDIR := $(OUTPUT_ROOT)/$(HOST)/$(TARGET)
> >> -PREFIX := $(RESULT)/$(HOST)
> >> TARGETDIR := $(PREFIX)/$(TARGET)
> >>
> >> - Cleanup arch selection:
> >>
> >> ifeq ($(ARCH),x86_64)
> >> - RPM_ARCHS := x86_64 noarch
> >> + RPM_ARCHS := $(ARCH) noarch
> >> ifeq ($(BUILD),$(HOST))
> >> ifeq ($(TARGET),$(HOST))
> >> # When building the native compiler for x86_64, enable mixed mode.
> >> @@ -199,7 +206,7 @@
> >> endif
> >> endif
> >> else ifeq ($(ARCH),i686)
> >> - RPM_ARCHS := i386 i686 noarch
> >> + RPM_ARCHS := $(ARCH) i386 noarch
> >> else ifeq ($(ARCH), armhfp)
> >>
> >> - Don't create 'devkit.info' unconditinally. Only build it as part of
> >> the "all" target invocation. This prevents the creation of a
> >> 'devkit.info' with the wrong "BASE_OS_VERSION" if the Makefile is
> >> invoked several times with different "BASE_OS_VERSION" values:
> >>
> >> -$(PREFIX)/devkit.info: FRC
> >> +$(PREFIX)/devkit.info:
> >> @echo 'Creating devkit.info in the root of the kit'
> >> rm -f $@
> >> touch $@
> >> @@ -611,7 +623,4 @@
> >> # this is only built for host. so separate.
> >> ccache : $(ccache)
> >>
> >> -# Force target
> >> -FRC:
> >>
> >> - put the base directory of the devkits into the tar archives. I don't
> >> like tar archives which don't have a single top-level directory and
> >> expand right into the current working directory :)
> >>
> >> make/devkit/Makefile
> >>
> >> %.tar.gz :
> >> @echo 'Creating compiler package $@'
> >> - cd $(RESULT)/$(PLATFORM) && tar -czf $@ *
> >> + cd $(RESULT) && tar -czf $@ $(PLATFORM)/*
> >> touch $@
More information about the build-dev
mailing list