Testing accessibility / sample apps

Felipe Heidrich felipe.heidrich at oracle.com
Wed Jun 25 16:17:38 UTC 2014 

When in doubt you can always specify -Djavafx.verbose=true and observed the libraries are begin loaded.
In Steve’s example you should see something like
Loaded /Users/Steve/Documents/jfx-8u20/jfx/rt/build/sdk/rt/lib/libglass.dylib
…

Felipe



On Jun 25, 2014, at 8:51 AM, Kevin Rushforth <kevin.rushforth at oracle.com> wrote:

> While you are there, if the Wiki doesn't already say it (I think it does) then note that this presumes you have removed jfxrt.jar from the jre/lib/ext directory of your JDK.
> 
> -- Kevin
> 
> 
> Stephen F Northover wrote:
>> The following line of crap works for me on Windows to run Ensemble:
>> 
>> java -cp /Users/Steve/Documents/jfx-8u20/jfx/rt/build/sdk/rt/lib/ext/jfxrt.jar;/Users/Steve/Documents/jfx-8u20/jfx/rt/apps/samples/Ensemble8/dist/Ensemble8.jar ensemble.EnsembleApp
>> 
>> I just checked the wiki and it's not documented.  I will update it.
>> 
>> Steve
>> 
>> On 2014-06-25, 11:04 AM, Kevin Rushforth wrote:
>>> If you use build/sdk/rt/lib/ext/jfxrt.jar then it will find the corresponding DLLs, but if you use the built class files rather than jfxrt.jar then you are right in that you need to specify -Djava.library.path to point to the native DLLs.
>>> 
>>> -- Kevin
>>> 
>>> 
>>> Tom Schindl wrote:
>>>> I think you also need to spec the native-dlls location else there's the
>>>> chance of a mismatch because the dlls are loaded from the JRE and might
>>>> not match the java-classes.
>>>> 
>>>> Tom
>>>> 
>>>> On 25.06.14 16:51, Kevin Rushforth wrote:
>>>>> I usually add jfxrt.jar to the bootclasspath, but as long as you have
>>>>> removed jfxrt.jar from your JDK, classpath will work, too.
>>>>> 
>>>>> -- Kevin
>>>>> 
>>>>> 
>>>>> Jann Schneider wrote:
>>>>>> Hi Felipe!
>>>>>> 
>>>>>> thanks, this are good News :-)
>>>>>> Well yesterday i had some issues with the build bc the famous Windows
>>>>>> updates Feature screwed things up .. however, i've recently fixed it
>>>>>> so i'll try it today.
>>>>>> Just another question concerning testing with the "build from
>>>>>> sources": i guess i can just run the example apps located in
>>>>>> <openjfx>/apps/ ? What would be the proper way to invoke one of them
>>>>>> and make sure the proper jfx is loaded?
>>>>>> Do i have to add it to the boot cp? Or is it enough to just put it on
>>>>>> the classpath?
>>>>>> 
>>>>>> Regards Jann
>>>>>> 
>>>>>> 
>>>>>> 2014-06-25 7:17 GMT+02:00, Felipe Heidrich <felipe.heidrich at oracle.com>:
>>>>>> 
>>>>>>> Hi Jann,
>>>>>>> 
>>>>>>> I have re-enabled all the accessibility code in
>>>>>>> hg.openjdk.java.net/openjfx/8u-dev/rt
>>>>>>> Notes:
>>>>>>> I have also released the fix for JAWS (RT-37530). But before testing
>>>>>>> text
>>>>>>> edits  you will need to add a setting to JAWS, see
>>>>>>> https://javafx-jira.kenai.com/browse/RT-37609
>>>>>>> You still need the -Djavafx.accessible.force=true on Windows 7, but very
>>>>>>> soon that will not be needed anymore, see:
>>>>>>> https://javafx-jira.kenai.com/browse/RT-37702
>>>>>>> 
>>>>>>> Internally we did virtually all our testing using Narrator and
>>>>>>> VoiceOver,
>>>>>>> which are the native screen readers on Windows and MacOSX respectively.
>>>>>>> I believe you will be the first to try JAWS and NVDA on Windows 7.
>>>>>>> Let me
>>>>>>> know how it goes.
>>>>>>> 
>>>>>>> Regards
>>>>>>> Felipe
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> On Jun 23, 2014, at 3:50 AM, Jann Schneider
>>>>>>> <jann.schneider at googlemail.com>
>>>>>>> wrote:
>>>>>>> 
>>>>>>>> Hi Felipe,
>>>>>>>> 
>>>>>>>> i tried with the latest available EA build, java -version tells me:
>>>>>>>> 
>>>>>>>> java version "1.8.0_20-ea"
>>>>>>>> Java(TM) SE Runtime Environment (build 1.8.0_20-ea-b19)
>>>>>>>> Java HotSpot(TM) Client VM (build 25.20-b19, mixed mode, sharing)
>>>>>>>> 
>>>>>>>> Also i used Jaws 15 (-.0.9 i think) and as an alternative NVDA 14.2.
>>>>>>>> Hum, not quite sure about the narrator tool: i guess thats the one
>>>>>>>> that shipps with windows? Well i can try this too though i'm not
>>>>>>>> really used to it :)
>>>>>>>> 
>>>>>>>> Maybe it's better to just wait until the code is back and test with
>>>>>>>> the current sources.. So we have the same base and know exactly what
>>>>>>>> we expect for the tests.
>>>>>>>> 
>>>>>>>> Regards Jann
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 2014-06-21 5:16 GMT+02:00, Felipe Heidrich
>>>>>>>> <felipe.heidrich at oracle.com>:
>>>>>>>>> Hi Jann,
>>>>>>>>> 
>>>>>>>>> That is great that you got to build JavaFX, it will make much
>>>>>>>>> easier to
>>>>>>>>> test
>>>>>>>>> patches and fixes going forward.
>>>>>>>>> That said, assuming that you downloaded jdk1.8.0_20 b19 or less,
>>>>>>>>> accessibility should have worked.
>>>>>>>>> What is the output of java -version ? Can you try Narrator ?
>>>>>>>>> 
>>>>>>>>> I’ll put the code back early next week, either Monday or Tuesday.
>>>>>>>>> You can track the progress here:
>>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37536
>>>>>>>>> I’ll email the list when the code is out.
>>>>>>>>> 
>>>>>>>>> Regards,
>>>>>>>>> Felipe
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> On Jun 20, 2014, at 4:00 PM, Jann Schneider
>>>>>>>>> <jann.schneider at googlemail.com>
>>>>>>>>> wrote:
>>>>>>>>> 
>>>>>>>>>> ok i just rebuild using the 32 bit jdk and this works!
>>>>>>>>>> $ gradle clean sdk
>>>>>>>>>> ...
>>>>>>>>>> BUILD SUCCESSFUL
>>>>>>>>>> 
>>>>>>>>>> :-)
>>>>>>>>>> 
>>>>>>>>>> I think i've just installed the 32 bit C++ compilers only. Maybe i
>>>>>>>>>> missed a setting in the installer of visual studio .. btw. i build
>>>>>>>>>> with the VS 2010 express (as suggested at the wiki).
>>>>>>>>>> 
>>>>>>>>>> So i'll wait until the accessibility portion is back in the repo and
>>>>>>>>>> try with that included then. Thanks for your help so fahr!
>>>>>>>>>> @Steve: could you please send a short message to the list if the
>>>>>>>>>> accessibility sources are in the repo again?
>>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> Regards
>>>>>>>>>> Jann
>>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> 2014-06-20 23:50 GMT+02:00, Jann Schneider
>>>>>>>>>> <jann.schneider at googlemail.com>:
>>>>>>>>>>> Yes looks like i have an issue with looking up cl.exe.
>>>>>>>>>>> This was the output when running with --stacktrace:
>>>>>>>>>>> 
>>>>>>>>>>> * Exception is:
>>>>>>>>>>> org.gradle.api.tasks.TaskExecutionException: Execution failed for
>>>>>>>>>>> task
>>>>>>>>>>> ':fxpackager:buildJavaPackager'.
>>>>>>>>>>> ...
>>>>>>>>>>> Caused by: org.gradle.api.GradleException: Could not call
>>>>>>>>>>> NativeCompileTask.compile() on task ':fxpackager:buildJavaPackager'
>>>>>>>>>>> ...
>>>>>>>>>>> Caused by: java.util.concurrent.ExecutionException:
>>>>>>>>>>> org.gradle.process.internal.ExecException: A problem occurred
>>>>>>>>>>> starting
>>>>>>>>>>> process 'command 'C:/Program Files (x86)/Microsoft Visual Studio
>>>>>>>>>>> 10.0/VC/BIN/amd64/cl.exe''
>>>>>>>>>>> ...
>>>>>>>>>>> Caused by: java.io.IOException: Cannot run program "C:/Program Files
>>>>>>>>>>> (x86)/Microsoft Visual Studio 10.0/VC/BIN/amd64/cl.exe" (in
>>>>>>>>>>> directory
>>>>>>>>>>> "D:\jann\sandbox\java\openjfx\modules\fxpackager"): CreateProcess
>>>>>>>>>>> error=2, Das System kann die angegebene Datei nicht finden
>>>>>>>>>>> ...
>>>>>>>>>>> Caused by: java.io.IOException: CreateProcess error=2, Das System
>>>>>>>>>>> kann
>>>>>>>>>>> die angegebene Datei nicht finden (file not found)
>>>>>>>>>>> 
>>>>>>>>>>> Actually cl.exe is located at: C:\Program Files (x86)\Microsoft
>>>>>>>>>>> Visual
>>>>>>>>>>> Studio 10.0\VC\bin - but it looks for ...bin/amd64/cl.exe
>>>>>>>>>>> 
>>>>>>>>>>> I've also tried to run the build from the cygwin terminal and as
>>>>>>>>>>> well
>>>>>>>>>>> from the visual studio command prompt where i could call cl.exe
>>>>>>>>>>> directly .. Always the same result.
>>>>>>>>>>> 
>>>>>>>>>>> Is there a parameter to specify where theVS compiler and stuff is
>>>>>>>>>>> located? btw. i checked that the %VS100COMNTools% variable is set
>>>>>>>>>>> properly.
>>>>>>>>>>> 
>>>>>>>>>>> What else could i check? Thanks in advance :)
>>>>>>>>>>> 
>>>>>>>>>>> Jann
>>>>>>>>>>> 
>>>>>>>>>>> 
>>>>>>>>>>> 
>>>>>>>>>>> 
>>>>>>>>>>> 2014-06-20 23:30 GMT+02:00, Kevin Rushforth
>>>>>>>>>>> <kevin.rushforth at oracle.com>:
>>>>>>>>>>>>> * What went wrong:
>>>>>>>>>>>>> Execution failed for task ':fxpackager:buildJavaPackager'.
>>>>>>>>>>>>> 
>>>>>>>>>>>>> Could not call NativeCompileTask.compile() on task
>>>>>>>>>>>>> ':fxpackager:buildJavaPackager'
>>>>>>>>>>>> When I've seen this in the past it's been related to the compiler
>>>>>>>>>>>> install. Do you have VS 2010 SP1 or something else?
>>>>>>>>>>>> 
>>>>>>>>>>>> -- Kevin
>>>>>>>>>>>> 
>>>>>>>>>>>> 
>>>>>>>>>>>> 
>>>>>>>>>>>> Jann Schneider wrote:
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>> 
>>>>>>>>>>>>> Well on windows it's always a bit more difficult i guess :-)
>>>>>>>>>>>>> After setting up my build environment as described on the wiki i
>>>>>>>>>>>>> first
>>>>>>>>>>>>> tried
>>>>>>>>>>>>> $ gradle tasks
>>>>>>>>>>>>> This works as expected! When running
>>>>>>>>>>>>> $ gradle sdk
>>>>>>>>>>>>> or just gradle without any target i get the following error:
>>>>>>>>>>>>> 
>>>>>>>>>>>>> FAILURE: Build failed with an exception.
>>>>>>>>>>>>> 
>>>>>>>>>>>>> * What went wrong:
>>>>>>>>>>>>> Execution failed for task ':fxpackager:buildJavaPackager'.
>>>>>>>>>>>>> 
>>>>>>>>>>>>>> Could not call NativeCompileTask.compile() on task
>>>>>>>>>>>>>> ':fxpackager:buildJavaPackager'
>>>>>>>>>>>>>> 
>>>>>>>>>>>>> Is this a "known issue" and do you know what's going wrong here?
>>>>>>>>>>>>> Should i post more "info" or "debug" output, too?
>>>>>>>>>>>>> 
>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>> Jann
>>>>>>>>>>>>> 
>>>>>>>>>>>>> 
>>>>>>>>>>>>> 
>>>>>>>>>>>>> 2014-06-20 21:58 GMT+02:00, Stephen F Northover
>>>>>>>>>>>>> <steve.x.northover at oracle.com>:
>>>>>>>>>>>>> 
>>>>>>>>>>>>>> Being non-Unix, Windows is always a pain.
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> On 2014-06-20, 3:42 PM, Kevin Rushforth wrote:
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> I hope you have similar success with the Windows build.
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> -- Kevin
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Jann Schneider wrote:
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> The build instructions for linux where very good! I was able to
>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>> the project without any problems.
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> Regards Jann
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> 2014-06-20 19:27 GMT+02:00, Kevin Rushforth
>>>>>>>>>>>>>>>> <kevin.rushforth at oracle.com>:
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> To be clear, you will still use the 8u-dev repo at the
>>>>>>>>>>>>>>>>> existing
>>>>>>>>>>>>>>>>> URL:
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> http://hg.openjdk.java.net/openjfx/8u-dev/rt
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> It's just that after Monday the repo will "become" the place
>>>>>>>>>>>>>>>>> where
>>>>>>>>>>>>>>>>> 8u40
>>>>>>>>>>>>>>>>> work is done.
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> Regarding the build, it is a bit painful to set up for
>>>>>>>>>>>>>>>>> Windows,
>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>> too bad as long as you don't need to build WebKit. We would be
>>>>>>>>>>>>>>>>> interested in hearing whether the instructions on the Wiki are
>>>>>>>>>>>>>>>>> sufficient for you to get the build working.
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> -- Kevin
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> Stephen F Northover wrote:
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> Ok, let us know how you get on with building FX.
>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> NOTE: The accessibility code is not there in 8u20 so you will
>>>>>>>>>>>>>>>>>> just
>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>> ensuring that you can build on Windows (there is nothing
>>>>>>>>>>>>>>>>>> there
>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>> test).  The accessibility code will be going back into
>>>>>>>>>>>>>>>>>> 8u40 on
>>>>>>>>>>>>>>>>>> Monday
>>>>>>>>>>>>>>>>>> or Tuesday so you'll need to get that release at that time
>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>>> it instead when it becomes available.  It's good to debug the
>>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>>> process though because it can be painful building from
>>>>>>>>>>>>>>>>>> source.
>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> On 2014-06-20, 12:43 PM, Jann Schneider wrote:
>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> @Steven: thx for the links. I'll try to build the openjfx
>>>>>>>>>>>>>>>>>>> project
>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>> the windows 7 notebook and test the sample apps with NVDA
>>>>>>>>>>>>>>>>>>> then.
>>>>>>>>>>>>>>>>>>> Today i tried the latest ea of jdk1.8.0_20 and sample apps
>>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>>> nvda
>>>>>>>>>>>>>>>>>>> 14.2. Unfortunately i was not able to read anything
>>>>>>>>>>>>>>>>>>> except the
>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>> title.
>>>>>>>>>>>>>>>>>>> I've just installed the jdk, changed my JAVA_HOME and
>>>>>>>>>>>>>>>>>>> tried to
>>>>>>>>>>>>>>>>>>> run
>>>>>>>>>>>>>>>>>>> e.g. the ensemble.jar
>>>>>>>>>>>>>>>>>>> $ java -jar ensemble.jar -Djavafx.accessible.force=true
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> Well i'll try it again by means of building javafx from
>>>>>>>>>>>>>>>>>>> source
>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>> post my results back to the list.
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> Regards Jann!
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> 2014-06-20 14:46 GMT+02:00, Stephen F Northover
>>>>>>>>>>>>>>>>>>> <steve.x.northover at oracle.com>:
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Hello Jann!
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> As soon as the 8u40 repos open, the Accessibility code will
>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>> put back
>>>>>>>>>>>>>>>>>>>> along with the recent fixes for JAWS.  Since OpenJFX
>>>>>>>>>>>>>>>>>>>> (and the
>>>>>>>>>>>>>>>>>>>> JDK) does
>>>>>>>>>>>>>>>>>>>> not have nightly builds, unless you want to wait for an EA
>>>>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>> 8u40
>>>>>>>>>>>>>>>>>>>> or 9, you will need to get OpenJFX and build it.  This is
>>>>>>>>>>>>>>>>>>>> really
>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>> best way to work with the team anyway because you can get
>>>>>>>>>>>>>>>>>>>> fixes
>>>>>>>>>>>>>>>>>>>> as they
>>>>>>>>>>>>>>>>>>>> are made.  EA builds take a while to come out and there
>>>>>>>>>>>>>>>>>>>> is no
>>>>>>>>>>>>>>>>>>>> substitute
>>>>>>>>>>>>>>>>>>>> for running on the latest code base.
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Unfortunately due to Microsoft, building OpenJFX is a bit
>>>>>>>>>>>>>>>>>>>> harder
>>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>>> Windows.  However, it is doable and the build instructions
>>>>>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>> complete.  If they are not (and if you hit any problems),
>>>>>>>>>>>>>>>>>>>> please
>>>>>>>>>>>>>>>>>>>> post
>>>>>>>>>>>>>>>>>>>> back to this list.
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Here are the build instructions:
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX 
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Many committers use an IDE (you don't have to) and
>>>>>>>>>>>>>>>>>>>> OpenJFX is
>>>>>>>>>>>>>>>>>>>> supports
>>>>>>>>>>>>>>>>>>>> the three major IDE vendors:
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/OpenJFX/Using+an+IDE 
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Looking forward to working with you,
>>>>>>>>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> On 2014-06-19, 7:10 PM, Felipe Heidrich wrote:
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Hi Jann,
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Unfortunately Linux support is not in the plan for 8u40.
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Windows 7 is supported and we have recently fixed JAWS
>>>>>>>>>>>>>>>>>>>>> support
>>>>>>>>>>>>>>>>>>>>> (see
>>>>>>>>>>>>>>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37530 and
>>>>>>>>>>>>>>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37609).
>>>>>>>>>>>>>>>>>>>>> Unfortunately due to the 8u20 to 8u40 transition the code
>>>>>>>>>>>>>>>>>>>>> has
>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>> being
>>>>>>>>>>>>>>>>>>>>> released yet, but soon.
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> The majority of our testing was done using Narrator. That
>>>>>>>>>>>>>>>>>>>>> said,
>>>>>>>>>>>>>>>>>>>>> I also
>>>>>>>>>>>>>>>>>>>>> tested NVDA lastest version on Windows 8 and I didn’t see
>>>>>>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>>>>>>> major
>>>>>>>>>>>>>>>>>>>>> problems.
>>>>>>>>>>>>>>>>>>>>> On the Mac we tested with VoiceOver.
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>>> Felipe
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> On Jun 19, 2014, at 2:24 PM, Jann Schneider
>>>>>>>>>>>>>>>>>>>>> <jann.schneider at googlemail.com> wrote:
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Hello all,
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> As a blind java developer i'm interessted in testing the
>>>>>>>>>>>>>>>>>>>>>> accessibility of
>>>>>>>>>>>>>>>>>>>>>> JavaFX and maybe help to find some issues.
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> I've just set up my build environment on my ubuntu 14.04
>>>>>>>>>>>>>>>>>>>>>> laptop
>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>> checked out the project files as described in the wiki. I
>>>>>>>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>>>>>>>> also set
>>>>>>>>>>>>>>>>>>>>>> it up on a windows 7 with Jaws 15 and NVDa (don't know
>>>>>>>>>>>>>>>>>>>>>> what
>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>> current
>>>>>>>>>>>>>>>>>>>>>> version is) for comparison..
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> No i am wondering if there are some examples i could try?
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Regards Jann
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> 
>>>> 
>>

More information about the openjfx-dev mailing list