Testing accessibility / sample apps

Wed Jun 25 15:51:25 UTC 2014

While you are there, if the Wiki doesn't already say it (I think it 
does) then note that this presumes you have removed jfxrt.jar from the 
jre/lib/ext directory of your JDK.

-- Kevin

Stephen F Northover wrote:
> The following line of crap works for me on Windows to run Ensemble:
>
> java -cp 
> /Users/Steve/Documents/jfx-8u20/jfx/rt/build/sdk/rt/lib/ext/jfxrt.jar;/Users/Steve/Documents/jfx-8u20/jfx/rt/apps/samples/Ensemble8/dist/Ensemble8.jar 
> ensemble.EnsembleApp
>
> I just checked the wiki and it's not documented.  I will update it.
>
> Steve
>
> On 2014-06-25, 11:04 AM, Kevin Rushforth wrote:
>> If you use build/sdk/rt/lib/ext/jfxrt.jar then it will find the 
>> corresponding DLLs, but if you use the built class files rather than 
>> jfxrt.jar then you are right in that you need to specify 
>> -Djava.library.path to point to the native DLLs.
>>
>> -- Kevin
>>
>>
>> Tom Schindl wrote:
>>> I think you also need to spec the native-dlls location else there's the
>>> chance of a mismatch because the dlls are loaded from the JRE and might
>>> not match the java-classes.
>>>
>>> Tom
>>>
>>> On 25.06.14 16:51, Kevin Rushforth wrote:
>>>> I usually add jfxrt.jar to the bootclasspath, but as long as you have
>>>> removed jfxrt.jar from your JDK, classpath will work, too.
>>>>
>>>> -- Kevin
>>>>
>>>>
>>>> Jann Schneider wrote:
>>>>> Hi Felipe!
>>>>>
>>>>> thanks, this are good News :-)
>>>>> Well yesterday i had some issues with the build bc the famous Windows
>>>>> updates Feature screwed things up .. however, i've recently fixed it
>>>>> so i'll try it today.
>>>>> Just another question concerning testing with the "build from
>>>>> sources": i guess i can just run the example apps located in
>>>>> <openjfx>/apps/ ? What would be the proper way to invoke one of them
>>>>> and make sure the proper jfx is loaded?
>>>>> Do i have to add it to the boot cp? Or is it enough to just put it on
>>>>> the classpath?
>>>>>
>>>>> Regards Jann
>>>>>
>>>>>
>>>>> 2014-06-25 7:17 GMT+02:00, Felipe Heidrich 
>>>>> <felipe.heidrich at oracle.com>:
>>>>>
>>>>>> Hi Jann,
>>>>>>
>>>>>> I have re-enabled all the accessibility code in
>>>>>> hg.openjdk.java.net/openjfx/8u-dev/rt
>>>>>> Notes:
>>>>>> I have also released the fix for JAWS (RT-37530). But before testing
>>>>>> text
>>>>>> edits  you will need to add a setting to JAWS, see
>>>>>> https://javafx-jira.kenai.com/browse/RT-37609
>>>>>> You still need the -Djavafx.accessible.force=true on Windows 7, 
>>>>>> but very
>>>>>> soon that will not be needed anymore, see:
>>>>>> https://javafx-jira.kenai.com/browse/RT-37702
>>>>>>
>>>>>> Internally we did virtually all our testing using Narrator and
>>>>>> VoiceOver,
>>>>>> which are the native screen readers on Windows and MacOSX 
>>>>>> respectively.
>>>>>> I believe you will be the first to try JAWS and NVDA on Windows 7.
>>>>>> Let me
>>>>>> know how it goes.
>>>>>>
>>>>>> Regards
>>>>>> Felipe
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Jun 23, 2014, at 3:50 AM, Jann Schneider
>>>>>> <jann.schneider at googlemail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Felipe,
>>>>>>>
>>>>>>> i tried with the latest available EA build, java -version tells me:
>>>>>>>
>>>>>>> java version "1.8.0_20-ea"
>>>>>>> Java(TM) SE Runtime Environment (build 1.8.0_20-ea-b19)
>>>>>>> Java HotSpot(TM) Client VM (build 25.20-b19, mixed mode, sharing)
>>>>>>>
>>>>>>> Also i used Jaws 15 (-.0.9 i think) and as an alternative NVDA 
>>>>>>> 14.2.
>>>>>>> Hum, not quite sure about the narrator tool: i guess thats the one
>>>>>>> that shipps with windows? Well i can try this too though i'm not
>>>>>>> really used to it :)
>>>>>>>
>>>>>>> Maybe it's better to just wait until the code is back and test with
>>>>>>> the current sources.. So we have the same base and know exactly 
>>>>>>> what
>>>>>>> we expect for the tests.
>>>>>>>
>>>>>>> Regards Jann
>>>>>>>
>>>>>>>
>>>>>>> 2014-06-21 5:16 GMT+02:00, Felipe Heidrich
>>>>>>> <felipe.heidrich at oracle.com>:
>>>>>>>> Hi Jann,
>>>>>>>>
>>>>>>>> That is great that you got to build JavaFX, it will make much
>>>>>>>> easier to
>>>>>>>> test
>>>>>>>> patches and fixes going forward.
>>>>>>>> That said, assuming that you downloaded jdk1.8.0_20 b19 or less,
>>>>>>>> accessibility should have worked.
>>>>>>>> What is the output of java -version ? Can you try Narrator ?
>>>>>>>>
>>>>>>>> I’ll put the code back early next week, either Monday or Tuesday.
>>>>>>>> You can track the progress here:
>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37536
>>>>>>>> I’ll email the list when the code is out.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Felipe
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Jun 20, 2014, at 4:00 PM, Jann Schneider
>>>>>>>> <jann.schneider at googlemail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> ok i just rebuild using the 32 bit jdk and this works!
>>>>>>>>> $ gradle clean sdk
>>>>>>>>> ...
>>>>>>>>> BUILD SUCCESSFUL
>>>>>>>>>
>>>>>>>>> :-)
>>>>>>>>>
>>>>>>>>> I think i've just installed the 32 bit C++ compilers only. 
>>>>>>>>> Maybe i
>>>>>>>>> missed a setting in the installer of visual studio .. btw. i 
>>>>>>>>> build
>>>>>>>>> with the VS 2010 express (as suggested at the wiki).
>>>>>>>>>
>>>>>>>>> So i'll wait until the accessibility portion is back in the 
>>>>>>>>> repo and
>>>>>>>>> try with that included then. Thanks for your help so fahr!
>>>>>>>>> @Steve: could you please send a short message to the list if the
>>>>>>>>> accessibility sources are in the repo again?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>> Jann
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2014-06-20 23:50 GMT+02:00, Jann Schneider
>>>>>>>>> <jann.schneider at googlemail.com>:
>>>>>>>>>> Yes looks like i have an issue with looking up cl.exe.
>>>>>>>>>> This was the output when running with --stacktrace:
>>>>>>>>>>
>>>>>>>>>> * Exception is:
>>>>>>>>>> org.gradle.api.tasks.TaskExecutionException: Execution failed 
>>>>>>>>>> for
>>>>>>>>>> task
>>>>>>>>>> ':fxpackager:buildJavaPackager'.
>>>>>>>>>> ...
>>>>>>>>>> Caused by: org.gradle.api.GradleException: Could not call
>>>>>>>>>> NativeCompileTask.compile() on task 
>>>>>>>>>> ':fxpackager:buildJavaPackager'
>>>>>>>>>> ...
>>>>>>>>>> Caused by: java.util.concurrent.ExecutionException:
>>>>>>>>>> org.gradle.process.internal.ExecException: A problem occurred
>>>>>>>>>> starting
>>>>>>>>>> process 'command 'C:/Program Files (x86)/Microsoft Visual Studio
>>>>>>>>>> 10.0/VC/BIN/amd64/cl.exe''
>>>>>>>>>> ...
>>>>>>>>>> Caused by: java.io.IOException: Cannot run program 
>>>>>>>>>> "C:/Program Files
>>>>>>>>>> (x86)/Microsoft Visual Studio 10.0/VC/BIN/amd64/cl.exe" (in
>>>>>>>>>> directory
>>>>>>>>>> "D:\jann\sandbox\java\openjfx\modules\fxpackager"): 
>>>>>>>>>> CreateProcess
>>>>>>>>>> error=2, Das System kann die angegebene Datei nicht finden
>>>>>>>>>> ...
>>>>>>>>>> Caused by: java.io.IOException: CreateProcess error=2, Das 
>>>>>>>>>> System
>>>>>>>>>> kann
>>>>>>>>>> die angegebene Datei nicht finden (file not found)
>>>>>>>>>>
>>>>>>>>>> Actually cl.exe is located at: C:\Program Files (x86)\Microsoft
>>>>>>>>>> Visual
>>>>>>>>>> Studio 10.0\VC\bin - but it looks for ...bin/amd64/cl.exe
>>>>>>>>>>
>>>>>>>>>> I've also tried to run the build from the cygwin terminal and as
>>>>>>>>>> well
>>>>>>>>>> from the visual studio command prompt where i could call cl.exe
>>>>>>>>>> directly .. Always the same result.
>>>>>>>>>>
>>>>>>>>>> Is there a parameter to specify where theVS compiler and 
>>>>>>>>>> stuff is
>>>>>>>>>> located? btw. i checked that the %VS100COMNTools% variable is 
>>>>>>>>>> set
>>>>>>>>>> properly.
>>>>>>>>>>
>>>>>>>>>> What else could i check? Thanks in advance :)
>>>>>>>>>>
>>>>>>>>>> Jann
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2014-06-20 23:30 GMT+02:00, Kevin Rushforth
>>>>>>>>>> <kevin.rushforth at oracle.com>:
>>>>>>>>>>>> * What went wrong:
>>>>>>>>>>>> Execution failed for task ':fxpackager:buildJavaPackager'.
>>>>>>>>>>>>
>>>>>>>>>>>> Could not call NativeCompileTask.compile() on task
>>>>>>>>>>>> ':fxpackager:buildJavaPackager'
>>>>>>>>>>> When I've seen this in the past it's been related to the 
>>>>>>>>>>> compiler
>>>>>>>>>>> install. Do you have VS 2010 SP1 or something else?
>>>>>>>>>>>
>>>>>>>>>>> -- Kevin
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Jann Schneider wrote:
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> Well on windows it's always a bit more difficult i guess :-)
>>>>>>>>>>>> After setting up my build environment as described on the 
>>>>>>>>>>>> wiki i
>>>>>>>>>>>> first
>>>>>>>>>>>> tried
>>>>>>>>>>>> $ gradle tasks
>>>>>>>>>>>> This works as expected! When running
>>>>>>>>>>>> $ gradle sdk
>>>>>>>>>>>> or just gradle without any target i get the following error:
>>>>>>>>>>>>
>>>>>>>>>>>> FAILURE: Build failed with an exception.
>>>>>>>>>>>>
>>>>>>>>>>>> * What went wrong:
>>>>>>>>>>>> Execution failed for task ':fxpackager:buildJavaPackager'.
>>>>>>>>>>>>
>>>>>>>>>>>>> Could not call NativeCompileTask.compile() on task
>>>>>>>>>>>>> ':fxpackager:buildJavaPackager'
>>>>>>>>>>>>>
>>>>>>>>>>>> Is this a "known issue" and do you know what's going wrong 
>>>>>>>>>>>> here?
>>>>>>>>>>>> Should i post more "info" or "debug" output, too?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Jann
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-06-20 21:58 GMT+02:00, Stephen F Northover
>>>>>>>>>>>> <steve.x.northover at oracle.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Being non-Unix, Windows is always a pain.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 2014-06-20, 3:42 PM, Kevin Rushforth wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I hope you have similar success with the Windows build.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -- Kevin
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jann Schneider wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The build instructions for linux where very good! I was 
>>>>>>>>>>>>>>> able to
>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>> the project without any problems.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards Jann
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2014-06-20 19:27 GMT+02:00, Kevin Rushforth
>>>>>>>>>>>>>>> <kevin.rushforth at oracle.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> To be clear, you will still use the 8u-dev repo at the
>>>>>>>>>>>>>>>> existing
>>>>>>>>>>>>>>>> URL:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> http://hg.openjdk.java.net/openjfx/8u-dev/rt
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> It's just that after Monday the repo will "become" the 
>>>>>>>>>>>>>>>> place
>>>>>>>>>>>>>>>> where
>>>>>>>>>>>>>>>> 8u40
>>>>>>>>>>>>>>>> work is done.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regarding the build, it is a bit painful to set up for
>>>>>>>>>>>>>>>> Windows,
>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>> too bad as long as you don't need to build WebKit. We 
>>>>>>>>>>>>>>>> would be
>>>>>>>>>>>>>>>> interested in hearing whether the instructions on the 
>>>>>>>>>>>>>>>> Wiki are
>>>>>>>>>>>>>>>> sufficient for you to get the build working.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -- Kevin
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Stephen F Northover wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Ok, let us know how you get on with building FX.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> NOTE: The accessibility code is not there in 8u20 so 
>>>>>>>>>>>>>>>>> you will
>>>>>>>>>>>>>>>>> just
>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>> ensuring that you can build on Windows (there is nothing
>>>>>>>>>>>>>>>>> there
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> test).  The accessibility code will be going back into
>>>>>>>>>>>>>>>>> 8u40 on
>>>>>>>>>>>>>>>>> Monday
>>>>>>>>>>>>>>>>> or Tuesday so you'll need to get that release at that 
>>>>>>>>>>>>>>>>> time
>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>> it instead when it becomes available.  It's good to 
>>>>>>>>>>>>>>>>> debug the
>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>> process though because it can be painful building from
>>>>>>>>>>>>>>>>> source.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 2014-06-20, 12:43 PM, Jann Schneider wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> @Steven: thx for the links. I'll try to build the 
>>>>>>>>>>>>>>>>>> openjfx
>>>>>>>>>>>>>>>>>> project
>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>> the windows 7 notebook and test the sample apps with 
>>>>>>>>>>>>>>>>>> NVDA
>>>>>>>>>>>>>>>>>> then.
>>>>>>>>>>>>>>>>>> Today i tried the latest ea of jdk1.8.0_20 and sample 
>>>>>>>>>>>>>>>>>> apps
>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>> nvda
>>>>>>>>>>>>>>>>>> 14.2. Unfortunately i was not able to read anything
>>>>>>>>>>>>>>>>>> except the
>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>> title.
>>>>>>>>>>>>>>>>>> I've just installed the jdk, changed my JAVA_HOME and
>>>>>>>>>>>>>>>>>> tried to
>>>>>>>>>>>>>>>>>> run
>>>>>>>>>>>>>>>>>> e.g. the ensemble.jar
>>>>>>>>>>>>>>>>>> $ java -jar ensemble.jar -Djavafx.accessible.force=true
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Well i'll try it again by means of building javafx from
>>>>>>>>>>>>>>>>>> source
>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>> post my results back to the list.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Regards Jann!
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2014-06-20 14:46 GMT+02:00, Stephen F Northover
>>>>>>>>>>>>>>>>>> <steve.x.northover at oracle.com>:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hello Jann!
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> As soon as the 8u40 repos open, the Accessibility 
>>>>>>>>>>>>>>>>>>> code will
>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>> put back
>>>>>>>>>>>>>>>>>>> along with the recent fixes for JAWS.  Since OpenJFX
>>>>>>>>>>>>>>>>>>> (and the
>>>>>>>>>>>>>>>>>>> JDK) does
>>>>>>>>>>>>>>>>>>> not have nightly builds, unless you want to wait for 
>>>>>>>>>>>>>>>>>>> an EA
>>>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>> 8u40
>>>>>>>>>>>>>>>>>>> or 9, you will need to get OpenJFX and build it.  
>>>>>>>>>>>>>>>>>>> This is
>>>>>>>>>>>>>>>>>>> really
>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>> best way to work with the team anyway because you 
>>>>>>>>>>>>>>>>>>> can get
>>>>>>>>>>>>>>>>>>> fixes
>>>>>>>>>>>>>>>>>>> as they
>>>>>>>>>>>>>>>>>>> are made.  EA builds take a while to come out and there
>>>>>>>>>>>>>>>>>>> is no
>>>>>>>>>>>>>>>>>>> substitute
>>>>>>>>>>>>>>>>>>> for running on the latest code base.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Unfortunately due to Microsoft, building OpenJFX is 
>>>>>>>>>>>>>>>>>>> a bit
>>>>>>>>>>>>>>>>>>> harder
>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>> Windows.  However, it is doable and the build 
>>>>>>>>>>>>>>>>>>> instructions
>>>>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>> complete.  If they are not (and if you hit any 
>>>>>>>>>>>>>>>>>>> problems),
>>>>>>>>>>>>>>>>>>> please
>>>>>>>>>>>>>>>>>>> post
>>>>>>>>>>>>>>>>>>> back to this list.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Here are the build instructions:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX 
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Many committers use an IDE (you don't have to) and
>>>>>>>>>>>>>>>>>>> OpenJFX is
>>>>>>>>>>>>>>>>>>> supports
>>>>>>>>>>>>>>>>>>> the three major IDE vendors:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> https://wiki.openjdk.java.net/display/OpenJFX/Using+an+IDE 
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Looking forward to working with you,
>>>>>>>>>>>>>>>>>>> Steve
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 2014-06-19, 7:10 PM, Felipe Heidrich wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Jann,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Unfortunately Linux support is not in the plan for 
>>>>>>>>>>>>>>>>>>>> 8u40.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Windows 7 is supported and we have recently fixed JAWS
>>>>>>>>>>>>>>>>>>>> support
>>>>>>>>>>>>>>>>>>>> (see
>>>>>>>>>>>>>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37530 and
>>>>>>>>>>>>>>>>>>>> https://javafx-jira.kenai.com/browse/RT-37609).
>>>>>>>>>>>>>>>>>>>> Unfortunately due to the 8u20 to 8u40 transition 
>>>>>>>>>>>>>>>>>>>> the code
>>>>>>>>>>>>>>>>>>>> has
>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>> being
>>>>>>>>>>>>>>>>>>>> released yet, but soon.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> The majority of our testing was done using 
>>>>>>>>>>>>>>>>>>>> Narrator. That
>>>>>>>>>>>>>>>>>>>> said,
>>>>>>>>>>>>>>>>>>>> I also
>>>>>>>>>>>>>>>>>>>> tested NVDA lastest version on Windows 8 and I 
>>>>>>>>>>>>>>>>>>>> didn’t see
>>>>>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>>>>>> major
>>>>>>>>>>>>>>>>>>>> problems.
>>>>>>>>>>>>>>>>>>>> On the Mac we tested with VoiceOver.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>> Felipe
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Jun 19, 2014, at 2:24 PM, Jann Schneider
>>>>>>>>>>>>>>>>>>>> <jann.schneider at googlemail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hello all,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> As a blind java developer i'm interessted in 
>>>>>>>>>>>>>>>>>>>>> testing the
>>>>>>>>>>>>>>>>>>>>> accessibility of
>>>>>>>>>>>>>>>>>>>>> JavaFX and maybe help to find some issues.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I've just set up my build environment on my ubuntu 
>>>>>>>>>>>>>>>>>>>>> 14.04
>>>>>>>>>>>>>>>>>>>>> laptop
>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>> checked out the project files as described in the 
>>>>>>>>>>>>>>>>>>>>> wiki. I
>>>>>>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>>>>>>> also set
>>>>>>>>>>>>>>>>>>>>> it up on a windows 7 with Jaws 15 and NVDa (don't 
>>>>>>>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>>>>>>> what
>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>> current
>>>>>>>>>>>>>>>>>>>>> version is) for comparison..
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> No i am wondering if there are some examples i 
>>>>>>>>>>>>>>>>>>>>> could try?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Regards Jann
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>
>